03-28-2016, 07:52 AM
|
#33 (permalink)
|
|
Base Member
Join Date: Mar 2014
Location: Sanford
Posts: 150
Drives: defensively
Rep Power: 12
|
Glad to know I wasn't the sole person out there that had the issue. At this point it is STUCK. I used vice grips, vice, everything. It's not coming out. The cooler will start to bend at this point before I even get movement on the fitting.
I just can't believe that this isn't mentioned anywhere. Is it the luck of the draw on what 2309 90d fittings you get? Do the oil coolers grab threaded differently? The only thing I can think of is to just use the straight fittings and then a 90 fitting like the one that comes off of the sandwich plate. I need to buy a whole new tru cool now which really annoys me.
Quote:
Originally Posted by tjlazer
I had issues also and it was a pain in the *** trying to rotate the fitting. You might have to use a vice to try to rotate the whole cooler to move, and you might have to order a new fitting if it's all scratched up like that. Also be careful with the cooler because it is made out of aluminum and it will bend.
|
|
|
|
Similar Threads
17Likes
Threaded Mode
