![]() |
what is the difference between a 24 row and a 48 row? dumb question i know but im about to buy and oil cooler and dont know which one to
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
|
#1 (permalink) |
|
Base Member
Join Date: Apr 2013
Location: Katy
Posts: 9
Drives: 2010 silver 370z
Rep Power: 14 ![]() |
what is the difference between a 24 row and a 48 row? dumb question i know but im about to buy and oil cooler and dont know which one to get.
__________________
2010 silver 370z stillen g3, megan test pipe, nitrous....
|
|
|
|
|
|
#2 (permalink) | |
|
A True Z Fanatic
Join Date: Feb 2013
Location: Sacramento, CA
Posts: 1,372
Drives: 40th Anniversary
Rep Power: 17 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
I just installed mine this weekend and kit that Jack from RPW sent me was easy and seamless. I didnt get the "per piece" and went with the universal kit as it was cheaper. You just need to make sure when ordering, that you order the 90 degree elbow coming off the oil cooler. I ended up spending $16 a piece retail vs $11 a piece had i gotten them from RPW. I would rate this install as a 3 out of 10 in difficulty for the average DIY'er. Mod's instructions were right on the ONLY THING I WOULD MENTION is the plate that you need to fabricate be only 3 inches wide. From the original picture it looks much bigger (like 6 inches wide). I used a $6 deck flashing plate from Lowes and used an angle grinder to get it down to size. The plate is 16 gauge and has plenty of strength to not bend against wind pressure spray paint it black and make your mounting holes. I have not ran the car yet so i cannot state how well the kit works but i will once i fire it up and check for leaks.
__________________
Are U in Sacramento or Central Valley California? Click here!
Foglight Hardwire in less than 10 minutes! DIY: Automatic VDC off Last edited by Cbtech; 08-05-2013 at 03:08 PM. |
|
|
|
|
|
|
#3 (permalink) | |
|
A True Z Fanatic
![]() Join Date: Mar 2009
Location: North East
Posts: 6,203
Drives: 09 370Z Sport M6
Rep Power: 655 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
You don't need a large cooler unless you are hitting the track, but if you do with any regularity - go big.
__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms |
|
|
|
|
![]() |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| Real Auto Dynamics built and R/T tuned built motor TT | Mr.Squeeze | Forced Induction | 132 | 04-18-2014 06:09 PM |
| Anyone done a DIY for a 34r cooler install? | bigdog1250 | DIY Section (Do-It-Yourself) | 7 | 07-05-2012 10:38 AM |
| Oil Cooler Install | Zedx | Engine & Drivetrain | 10 | 05-19-2011 02:35 AM |
| install oil cooler? | Mt Tam I am | Nissan 370Z General Discussions | 5 | 08-25-2010 09:08 AM |