DIY OEM Shift Boot Install on Automatic

XwChriswX · 10-31-2011, 09:27 PM

Quote:

Originally Posted by Baer383

On the 6sp assembly if you unscrew the bottom black plastic piece that's the piece that needs to fit once that piece fits you should be able to screw the 6sp assembly back together and fit it on the console.

I thought so too, but apparently the upper piece has a very small lip on it, I'm gonna have to file that down in the front to get it to fit. =/

The only thing I can see it hitting now is a small white... button of some sort on the left side of the shifter. I have no idea what it does, or how to remove it so I can't cut it. Therefore I have to cut the trim piece which I was hoping to not have to do.

I've had it, I'm buying that dremel tomorrow.

You watch after I get that though it's only going to take 15 mins and bam I'm done.

Although I am noticing the whole console trim piece when in place, doesn't want to sit all the way down. I'm wondering if it won't sit flush once it's mounted.

somatic · 10-31-2011, 09:29 PM

lol go my monkeys go !!!!

Baer383 · 10-31-2011, 09:33 PM

Quote:

Originally Posted by XwChriswX

I thought so too, but apparently the upper piece has a very small lip on it, I'm gonna have to file that down in the front to get it to fit. =/

The only thing I can see it hitting now is a small white... button of some sort on the left side of the shifter. I have no idea what it does, or how to remove it so I can't cut it. Therefore I have to cut the trim piece which I was hoping to not have to do.

I've had it, I'm buying that dremel tomorrow.

You watch after I get that though it's only going to take 15 mins and bam I'm done.

Although I am noticing the whole console trim piece when in place, doesn't want to sit all the way down. I'm wondering if it won't sit flush once it's mounted.

It will sit just like the auto piece,and the little white box on the left is for the shift lock in case you need to put the car in neutral just push down on the top and pull it in neutral,don't cut this box trim the black 6sp piece to go around it.

XwChriswX · 10-31-2011, 09:39 PM

Quote:

Originally Posted by Baer383

It will sit just like the auto piece,and the little white box on the left is for the shift lock in case you need to put the car in neutral just push down on the top and pull it in neutral,don't cut this box trim the black 6sp piece to go around it.

Yeah, I'm not messing with that thing.

But I've decided to call it quits for the night and start again tomorrow when there's more daylight. I'll go to Ace and get the dremel set cause with my file it's just taking too long to trim this piece down.

Baer383 · 10-31-2011, 09:42 PM

Quote:

Originally Posted by XwChriswX

Yeah, I'm not messing with that thing.

But I've decided to call it quits for the night and start again tomorrow when there's more daylight. I'll go to Ace and get the dremel set cause with my file it's just taking too long to trim this piece down.

That's cool I will check in tomorrow night some time while I'm wet sanding & polishing my roof,it's now Black

XwChriswX · 10-31-2011, 09:43 PM

Quote:

Originally Posted by Baer383

That's cool I will check in tomorrow night some time while I'm wet sanding & polishing my roof,it's now Black

When I get to Georgia/SC we'll have to compare our parts to see if I was even cutting what I needed to vs cutting everything

Baer383 · 10-31-2011, 09:54 PM

Quote:

Originally Posted by XwChriswX

When I get to Georgia/SC we'll have to compare our parts to see if I was even cutting what I needed to vs cutting everything

Yeah it will be good to meet you when you come to Atl around Thanksgiving,

Good luck cutting.

XwChriswX · 10-31-2011, 09:58 PM

Thanks to my lil hacksaw-ing there are plastic shavings everywhere inside the console. Good luck getting all that out.

Baer383 · 10-31-2011, 10:02 PM

Quote:

Originally Posted by XwChriswX

Thanks to my lil hacksaw-ing there are plastic shavings everywhere inside the console. Good luck getting all that out.

I blew them out with my compressor and vacuum the up when I was done.

XwChriswX · 10-31-2011, 10:03 PM

Quote:

Originally Posted by Baer383

I blew them out with my compressor and vacuum the up when I was done.

I'm just worried about them getting down in the tranny, or in the shifter area and messing up something. I don't have a Compressor lol and my hand vac won't have enough focused power to get it all out... oh well lol

Baer383 · 10-31-2011, 10:11 PM

Quote:

Originally Posted by XwChriswX

I'm just worried about them getting down in the tranny, or in the shifter area and messing up something. I don't have a Compressor lol and my hand vac won't have enough focused power to get it all out... oh well lol

Don't over analyze it just trim the shifter base & the black bottom piece on the 6sp part and assemble and enjoy.

It will all be good!!!

XwChriswX · 10-31-2011, 10:14 PM

Quote:

Originally Posted by Baer383

Don't over analyze it just trim the shifter base & the black bottom piece on the 6sp part and assemble and enjoy.

It will all be good!!!

LoL I've got that lil black piece all cut to hell and it still wasn't working.

Baer383 · 10-31-2011, 10:17 PM

Quote:

Originally Posted by XwChriswX

LoL I've got that lil black piece all cut to hell and it still wasn't working.

Look at this piece closely and you will see where I cut it,but since every thing is black you have to look at the pic for awhile.

XwChriswX · 10-31-2011, 10:21 PM

Quote:

Originally Posted by Baer383

Look at this piece closely and you will see where I cut it,but since every thing is black you have to look at the pic for awhile.

Yup, I have the bottom piece trimmed the same way, it's not the bottom piece thats hitting, it's the upper piece thats hitting that white shifter box. =/

Baer383 · 10-31-2011, 10:36 PM

Quote:

Originally Posted by XwChriswX

Yup, I have the bottom piece trimmed the same way, it's not the bottom piece thats hitting, it's the upper piece that's hitting that white shifter box. =/

You have to trim the upper piece a little in the same spot you trimmed the lower black piece (the circular part)but don't worry about the boot being unsupported when it is installed it is up against the shifter housing you have been cutting on.

Plus you have to trim around the black square where the hazard switch goes.

10-31-2011, 09:29 PM	#77 (permalink)
somatic A True Z Fanatic Join Date: Aug 2011 Location: Grapevine, TX Posts: 1,767 Drives: 2013 GS350 Rep Power: 16	lol go my monkeys go !!!! __________________ Passport 9500i HW\|Short Tail Exhaust\|Evo-r CF Fangs & Fog\|Blacked Out Roof\|Status Elite Intake 19/22\|AUTO Shift Boot DIY\|GTR Button\|Rear Limo Tint\|S2carbonworks hood dampeners\|Falken Rt-7m 20"s w/Jade Project Mu Tuner Lugs\|P:JDM Oil Cap\|Tow Hook\|SOLD

10-31-2011, 09:58 PM	#83 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	Thanks to my lil hacksaw-ing there are plastic shavings everywhere inside the console. Good luck getting all that out. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Shift Boot Install	E-Licious	DIY Section (Do-It-Yourself)	8	10-06-2020 11:36 AM
7AT Shift Boot!!!	CharleyGFX	Exterior & Interior	92	11-12-2015 10:44 PM
shift boot	dangen1980	Exterior & Interior	5	09-15-2011 02:43 PM
New shift boot help	theDreamer	Exterior & Interior	4	01-29-2010 05:24 PM
WTB OEM Shift Boot.	Rps13.jw	Parts for sale (Private Classifieds)	0	10-09-2009 05:43 PM