|
A quick addition to the DYI regarding the difficult-to-access 3rd internal bolt on the drivers door handle: don't try to remove it right away. First remove the two easy bolts,
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
04-09-2012, 02:54 PM
|
#1 (permalink) |
|
Base Member
Join Date: May 2011
Location: Las Vegas
Posts: 55
Drives: Camaro SS
Rep Power: 13  |
A quick addition to the DYI regarding the difficult-to-access 3rd internal bolt on the drivers door handle: don't try to remove it right away. First remove the two easy bolts, and the torx screw in the door jamb, and THEN the handle can then be pulled out and repositioned a little so that you can now get a straight shot at the 3rd internal bolt through the lower access hole, and this will make accessing that bolt much MUCH easier -- no need for flex handles, u-joints or other contortions.
Cheers, Kent |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Door Panel Removal & Door Speaker Size | jikhead | DIY Section (Do-It-Yourself) | 46 | 07-16-2016 10:04 PM |
| Door handle rattles from outside...anyone? | zaust | Exterior & Interior | 1 | 02-27-2012 03:21 PM |
| 370z door handle swap? | ThoriumHotdog | Exterior & Interior | 11 | 11-03-2010 10:44 PM |
| EVO-R door handle review by SIMOTA1 | simota1 | Exterior & Interior | 12 | 09-09-2010 09:56 PM |
| tried to remove door handle...Fail | Soon | DIY Section (Do-It-Yourself) | 4 | 08-02-2010 04:03 PM |
27Likes
Hybrid Mode
