tried to remove door handle...Fail

Soon · 08-02-2010, 01:17 PM

I tried to remove the door handles but i cant get to the 10mm screw on the right hand side on the drivers side in the lower opening hole, how the hell can you even reach it though that little hole.its way off to the right a wrench aint working and a philips angle wont work either...

anyone...?

zZSoCalZz · 08-02-2010, 01:36 PM

I believe there's a DIY about this and the dude who did it said right side was a pita to do.

Caravanshaka · 08-02-2010, 01:48 PM

I have taken them off and had no trouble at all. Only used a 10mm and a straight extension to get to all of the bolts. Not sure which one you are talking about?

Soon · 08-02-2010, 04:00 PM

Quote:

Originally Posted by Caravanshaka

I have taken them off and had no trouble at all. Only used a 10mm and a straight extension to get to all of the bolts. Not sure which one you are talking about?

okay now correct me if im wrong...on the drivers side there's 1 screw on the top and two screws on the bottom that have to be taken out right?

Caravanshaka · 08-02-2010, 04:03 PM

that sounds correct from memory. There is also a small screw in the door jamb that holds the lock in place that will need to be removed as well.

08-02-2010, 01:17 PM	#1 (permalink)
Soon Base Member Join Date: Mar 2010 Location: Rockland NY Posts: 240 Drives: 2008 Cherokee SRT8 Rep Power: 15	tried to remove door handle...Fail I tried to remove the door handles but i cant get to the 10mm screw on the right hand side on the drivers side in the lower opening hole, how the hell can you even reach it though that little hole.its way off to the right a wrench aint working and a philips angle wont work either... anyone...? __________________ 2009 blk 370z=SOLD Now drives... SRT!!

08-02-2010, 01:36 PM	#2 (permalink)
zZSoCalZz Base Member Join Date: May 2010 Location: Los Angeles Posts: 176 Drives: in traffic! Rep Power: 14	I believe there's a DIY about this and the dude who did it said right side was a pita to do. __________________ 2009 MB: Stillen G3 Intake // Customized illuminated kickplates frost blue Z //

08-02-2010, 01:48 PM	#3 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	I have taken them off and had no trouble at all. Only used a 10mm and a straight extension to get to all of the bolts. Not sure which one you are talking about? __________________ ____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole.

08-02-2010, 04:03 PM	#5 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	that sounds correct from memory. There is also a small screw in the door jamb that holds the lock in place that will need to be removed as well. __________________ ____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best way to remove a door ding	mikeaqck	Exterior & Interior	2	03-26-2010 06:32 PM
Driver Side Door Handle	Zigen5	Nissan 370Z General Discussions	8	03-14-2010 02:07 PM
Door handle sticking/not opening	abakja1	Exterior & Interior	7	11-10-2009 02:11 AM
Carbon Fiber Door Handle	SpawnAeroJohn	Exterior & Interior	15	10-16-2009 10:18 PM
Unlocking both doors simultaneously with door handle request button	Musashi	Nissan 370Z General Discussions	18	03-21-2009 03:59 PM