DIY-Door handle removal

Zweb01 · 12-13-2011, 01:19 PM

how were u able to that unplugged

Zweb01 · 12-13-2011, 01:20 PM

how were u able to get that unplugged?

Osiris · 12-13-2011, 01:22 PM

Quote:

Originally Posted by Zweb01

how were u able to get that unplugged?

the wire goes through a tab that holds it to the inside frame of the door. You have to pull that tab out of the hole, then you can get better leverage to unplug the harness. I believe the plug/harness sits right on the actual tab.

Zweb01 · 12-13-2011, 01:32 PM

Quote:

Originally Posted by Osiris

the wire goes through a tab that holds it to the inside frame of the door. You have to pull that tab out of the hole, then you can get better leverage to unplug the harness. I believe the plug/harness sits right on the actual tab.

okay i can get my hand in there i just cant disconnect the black tab or the blue connector

Osiris · 12-13-2011, 01:43 PM

Quote:

Originally Posted by Zweb01

okay i can get my hand in there i just cant disconnect the black tab or the blue connector

yea, that's why you have to pry it off the frame, and then unplug it.

Zweb01 · 12-13-2011, 01:52 PM

well thanks for the help but im letting this one go

xweaponx · 02-12-2012, 07:51 PM

glokwork, what process did you use for painting the door handles? is that factory matched paint?

Osiris · 02-12-2012, 08:08 PM

Quote:

Originally Posted by xweaponx

glokwork, what process did you use for painting the door handles? is that factory matched paint?

Hey xweapon, mine is magnetic black also, i took my handles to a local collision center and gave them the paint code. And the paint matches pretty good. Definitely a good move for the black Z's.

xweaponx · 02-12-2012, 08:50 PM

Thanks. Did you have them paint it? or did you just get the paint from them? If I remember correctly, the paint code is G41.

Osiris · 02-12-2012, 09:03 PM

Quote:

Originally Posted by xweaponx

Thanks. Did you have them paint it? or did you just get the paint from them? If I remember correctly, the paint code is G41.

that sounds about right, but you can find the paint code on the sticker in the door jam. But no, i took the handles to them and had them paint it, was around $100. But i think that price will vary greatly depending where you go.

xweaponx · 02-14-2012, 08:46 PM

alright. any kind of clearcoat on it? pics?

Osiris · 02-21-2012, 04:44 PM

Quote:

Originally Posted by xweaponx

alright. any kind of clearcoat on it? pics?

Honestly, i'm not sure if they used clearcoat or not...but it's shiny!

Ill · 04-07-2012, 07:43 AM

Last night I was reattaching my door handles after I finished pairing them satin black to match the rest of the DIY painting I did this week. While installing
I dropped a bolt down the door frame and can't find it with a magnet or anything. Anybody have an suggestions? I can buy more bolts of needed but two rolling around on my door frame doesn't sound to appealing.

Thanks
-Ill

MJB · 04-07-2012, 09:54 AM

^ Lol, I dropped my 10mm socket down there. I don't feel like ripping the door apart trying to find it. I haven't heard it rattle or anything so I just pretend it never happened.

Huck · 04-07-2012, 10:09 AM

Yeah what MJB said. Or just turn your radio up and step on the gas. That's what I always do. I've always said its not a custom mod until you have extra parts laying around.

Hell, when I had my civic I would take the dash apart all the time, somehow I ended up with more screws out of the dash than what originally came with the car. The whole dash was being held together by like 1 1/2 screws. LIKE A BAWS.

Sent from my iPizzle using magic and new fangled science stuff.

04-07-2012, 10:09 AM	#45 (permalink)
Huck What the Huck?! Join Date: Jan 2012 Location: Cocoa, Florida Age: 30 Posts: 3,480 Drives: Pantydropper machine Rep Power: 13	Yeah what MJB said. Or just turn your radio up and step on the gas. That's what I always do. I've always said its not a custom mod until you have extra parts laying around. Hell, when I had my civic I would take the dash apart all the time, somehow I ended up with more screws out of the dash than what originally came with the car. The whole dash was being held together by like 1 1/2 screws. LIKE A BAWS. Sent from my iPizzle using magic and new fangled science stuff. __________________ SHOW: PlastiDip everything / LEDS / Swift / Evo-R GO: F.I. CF CBE / F.I. LTH / Stillen CAI / Stillen Pulley / UpRev SOUND: Pioneer / Zenclosure / Kicker / Alpine Type R

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Door Panel Removal & Door Speaker Size	jikhead	DIY Section (Do-It-Yourself)	33	Today 08:48 AM
Door handle rattles from outside...anyone?	zaust	Exterior & Interior	1	02-27-2012 03:21 PM
370z door handle swap?	ThoriumHotdog	Exterior & Interior	11	11-03-2010 10:44 PM
EVO-R door handle review by SIMOTA1	simota1	Exterior & Interior	12	09-09-2010 09:56 PM
tried to remove door handle...Fail	Soon	DIY Section (Do-It-Yourself)	4	08-02-2010 04:03 PM

12-13-2011, 01:19 PM	#31 (permalink)
Zweb01 Base Member Join Date: Sep 2011 Location: Xenia Posts: 20 Drives: 2011 370z black Rep Power: 2	how were u able to that unplugged

12-13-2011, 01:20 PM	#32 (permalink)
Zweb01 Base Member Join Date: Sep 2011 Location: Xenia Posts: 20 Drives: 2011 370z black Rep Power: 2	how were u able to get that unplugged?

12-13-2011, 01:52 PM	#36 (permalink)
Zweb01 Base Member Join Date: Sep 2011 Location: Xenia Posts: 20 Drives: 2011 370z black Rep Power: 2	well thanks for the help but im letting this one go

02-12-2012, 07:51 PM	#37 (permalink)
xweaponx Base Member Join Date: Sep 2011 Location: North Carolina Age: 22 Posts: 96 Drives: 2011 370Z Rep Power: 2	glokwork, what process did you use for painting the door handles? is that factory matched paint?

02-12-2012, 08:50 PM	#39 (permalink)
xweaponx Base Member Join Date: Sep 2011 Location: North Carolina Age: 22 Posts: 96 Drives: 2011 370Z Rep Power: 2	Thanks. Did you have them paint it? or did you just get the paint from them? If I remember correctly, the paint code is G41.

02-14-2012, 08:46 PM	#41 (permalink)
xweaponx Base Member Join Date: Sep 2011 Location: North Carolina Age: 22 Posts: 96 Drives: 2011 370Z Rep Power: 2	alright. any kind of clearcoat on it? pics?

04-07-2012, 07:43 AM	#43 (permalink)
Ill Base Member Join Date: Mar 2012 Location: Bellevue Posts: 34 Drives: 09 370z Base 6MT Rep Power: 2	Last night I was reattaching my door handles after I finished pairing them satin black to match the rest of the DIY painting I did this week. While installing I dropped a bolt down the door frame and can't find it with a magnet or anything. Anybody have an suggestions? I can buy more bolts of needed but two rolling around on my door frame doesn't sound to appealing. Thanks -Ill

04-07-2012, 09:54 AM	#44 (permalink)
MJB Shoulda bought a Viper Join Date: Aug 2011 Location: Tacoma, WA Age: 29 Posts: 981 Drives: 09 Nismo Z #0483 Rep Power: 3	^ Lol, I dropped my 10mm socket down there. I don't feel like ripping the door apart trying to find it. I haven't heard it rattle or anything so I just pretend it never happened.