QuickJack Lift System

l2iceman

Been looking into this, my Z is lowered on swift springs and I have the evo r sides. What is the height of these ramps when flat? I want to measure the side gear ancestry to see if I'd be able to slide it in sideways under my car.

CB1

It depends on what model you are looking at getting.
Take a look at their measuring guide. It helped me. Also, feel free to call them. They were helpful over the phone too.
https://www.quickjack.com/quickjack-...ing-guide.html
I purchased the 7000-SLX and it works great for me. I also got the pinch weld blocks. I am at stock height.
They say you need a little clearance so that it can gain momentum to lift. I have an inch or two of clearance and mine lifts perfect.
This is right off of that page. "Keep in mind that there must be some space between QuickJack and your vehicle’s lifting points. If a collapsed QuickJack is pressed flush against your car, it will be unable to generate enough force to lift the vehicle."

Hope this helps..

__________________
2011 Metallic Black, Touring/Sport, Nav, AT
| F.I. Twin Turbo #060 | E85 | F.I. Built 7AT | F.I. Flex Plate | F.I. 34 Row Oil Cooler | F.I. 19 Row 7AT Cooler | ECUTEK Tuned By Sebastian | 647 WHP 605 TQ |

TreeSemdyZee

3” to 3.6”

https://www.quickjack.com/#fullspecs

__________________
Borla S-Type | Motordyne | Z1 (lots) | South Bend | K&N | Nismo/Nismo S-Tune | Eibach | Aerojacket | Fujimara | Spl | ZSpeed Performance | Kenwood-Infinity-Sound Ordnance | Whiteline | Ecutek | Hotchkis | Clazzio | VQ Vortex |Morimoto XB |Dynosty Tune 329.64hp 265.73 ft/lb

TreeSemdyZee

$150 discount code.

Quick150

__________________
Borla S-Type | Motordyne | Z1 (lots) | South Bend | K&N | Nismo/Nismo S-Tune | Eibach | Aerojacket | Fujimara | Spl | ZSpeed Performance | Kenwood-Infinity-Sound Ordnance | Whiteline | Ecutek | Hotchkis | Clazzio | VQ Vortex |Morimoto XB |Dynosty Tune 329.64hp 265.73 ft/lb