08-24-2013, 08:52 PM
|
#7 (permalink)
|
|
A True Z Fanatic
Join Date: May 2013
Location: Columbus, OH
Posts: 5,051
Drives: 2013 Silver 370z
Rep Power: 3390
|
Quote:
Originally Posted by olddudesrule
I didn't measure it like you did (smart move) before I installed adjustable rear arms and toe bolts. That said, when I got to the alignment shop, I was -1.6 left and -0.6 right. After the alignment, I was -1.6/-1.5. The toe was more of an issue at .95/1.20 before, but readjusted back to min spec of .10/.10. I probably aided in the toe mis-adjustment when I installed the toe bolts. I don't think the springs were to blame as much.
|
Yeah and the camber was prob like that because the arms could be set anywhere from the factory. Are your bolts eccentric or is it a lockout kit? I'm assuming eccentric because you said you adjusted toe and didn't buy toe arms. I guess adding just a bolt not allowing toe adjustment would not be a good think unless someone lucky that toe would be perfect.
__________________
13 370z-
|
|
|
Similar Threads
11Likes
Threaded Mode
