Noise coming from Endlinks

Rusty · 07-02-2020, 10:14 PM

Quote:

Originally Posted by z34von82

Will do

thank you sir!

ZoomZ · 02-21-2021, 03:28 PM

Aren't the conical aluminum spacer supposed to be on the control arm end?

zz

k67p67 · 02-21-2021, 04:28 PM

The conical aluminum spacers belong on the sway bar end of the endlink.

From SPL site:

ZoomZ · 02-21-2021, 04:50 PM

Quote:

Originally Posted by k67p67

The conical aluminum spacers belong on the sway bar end of the endlink.

From SPL site:

Interesting. 2018 SPL install seems to contradict itself in steps 3 and 4. Looking at your image, seems that the angle at the control arm end is not Perpendicular, and is in fact putting an unwanted twist to rod-end. Would make sense to put spacer there to alleviate that. According to image.

IMG_2084 (1).JPG

k67p67 · 02-22-2021, 04:14 PM

Hard to say without seeing the end of that sway bar. There may be some preload causing the endlink to rotate off center.

02-21-2021, 03:28 PM	#2 (permalink)
ZoomZ Track Member Join Date: Jan 2017 Location: Vancouver, BC Posts: 801 Drives: 17' 370Z Nismo Rep Power: 40656	Aren't the conical aluminum spacer supposed to be on the control arm end? zz Last edited by ZoomZ; 02-21-2021 at 03:32 PM.

02-21-2021, 04:28 PM	#3 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 313 Drives: 2017 Nismo Tech 6MT Rep Power: 3937	The conical aluminum spacers belong on the sway bar end of the endlink. From SPL site: ZoomZ likes this. __________________ SOLD2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square

02-22-2021, 04:14 PM	#5 (permalink)
k67p67 Enthusiast Member Join Date: Oct 2016 Location: Rancho Cucamonga, CA Posts: 313 Drives: 2017 Nismo Tech 6MT Rep Power: 3937	Hard to say without seeing the end of that sway bar. There may be some preload causing the endlink to rotate off center. __________________ SOLD2017 370Z Nismo Tech 6MT PART OUT IN PROGRESS Work \| Motordyne \| Powertrix \| Swift \| Michelin \| Takeda \| Hotchkis \| RJM \| Voodoo13 \| SPL \| SPC \| Z1 Motorsports \| ZSpeed \| Morimoto \| Craft Square

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
noise when coming to a stop	Limeybastard	Engine & Drivetrain	8	10-29-2014 05:13 PM
Noise coming from exhaust pipes?	zefaulter	Intake/Exhaust	10	09-18-2014 11:23 PM
Noise coming from Transmission and rear	limited733	Engine & Drivetrain	1	03-04-2014 10:53 AM
High pitched noise coming from speakers	invader19	Audio & Video	11	11-12-2012 05:24 PM
Rattle noise coming from real after ark CBE and NOn T/P installed!!	370zjames	Intake/Exhaust	5	08-31-2011 10:24 PM