ZSpeed Performance Aluminum Engine Undershrouds New Vendor Special!

Joe@ZSpeed · 05-25-2012, 09:41 PM

Quote:

Originally Posted by g96818

still waiting

Sorry about that, Shipping to HI is $60.00
PC is $200.00
Non PC is $175.00

I am out of both for a few days, ZDayZ cleaned me out! Should have Non-PC Tuesday and PC by the following Monday hopefully.

Joe@ZSpeed · 05-25-2012, 09:41 PM

Quote:

Originally Posted by CJ8501

Ordered V2 from your site. Thanks again! Can't wait to get it!

Thanks!

g96818 · 05-28-2012, 02:53 PM

Quote:

Originally Posted by Joe@ZSpeed

Sorry about that, Shipping to HI is $60.00
PC is $200.00
Non PC is $175.00

I am out of both for a few days, ZDayZ cleaned me out! Should have Non-PC Tuesday and PC by the following Monday hopefully.

Thanks, Do I just order it through the site or can i paypal you?
I'll take the pc version. do I need the hardware kit to install?

Joe@ZSpeed · 05-28-2012, 06:58 PM

Quote:

Originally Posted by g96818

Thanks, Do I just order it through the site or can i paypal you?
I'll take the pc version. do I need the hardware kit to install?

I can send you a pay-pal invoice, PM me your E-mail.

JJ-NISMO · 06-15-2012, 07:27 PM

Payment sent!

Cannot wait to get this bad boy installed. My car feels neutered and not even functional without the flap there.

Joe@ZSpeed · 06-15-2012, 07:41 PM

All shields back in stock!

Joe@ZSpeed · 06-15-2012, 07:42 PM

Quote:

Originally Posted by JJ-NISMO

Payment sent!

Cannot wait to get this bad boy installed. My car feels neutered and not even functional without the flap there.

Thanks JJ-Nismo!

Ron · 06-15-2012, 09:18 PM

So I was getting ready to install this today and I was expecting all sorts of complications because of the TT piping... So I bust out my dremel, toolbox, extra screws, spacers etc etc... FOR NOTHING, this thing just bolted right in! It is miles away from the pipes and everything lined up properly... 20 min later I was done... Thank you Joe!

Joe@ZSpeed · 06-16-2012, 06:36 AM

Quote:

Originally Posted by Ron

So I was getting ready to install this today and I was expecting all sorts of complications because of the TT piping... So I bust out my dremel, toolbox, extra screws, spacers etc etc... FOR NOTHING, this thing just bolted right in! It is miles away from the pipes and everything lined up properly... 20 min later I was done... Thank you Joe!

Great to hear Ron!

JJ-NISMO · 06-23-2012, 04:13 AM

Installed and everything looks good so far.

After looking at the pictures, I just realized I mounted the plastic wheel well pieces on the wrong side and will have to change them tomorrow.

I had a few black plastic pop rivets which I did not use. What are these for?

I also had extra metal clips (not the bolts) that I did not use. Is this a problem?

Thanks for the quick shipping Joe!

Ron · 06-23-2012, 07:24 AM

I think he just sends extras. If you reuse your hardware you will have a little bit of everything left over.

Joe@ZSpeed · 06-23-2012, 07:34 AM

Quote:

Originally Posted by JJ-NISMO

Installed and everything looks good so far.

After looking at the pictures, I just realized I mounted the plastic wheel well pieces on the wrong side and will have to change them tomorrow.

I had a few black plastic pop rivets which I did not use. What are these for?

I also had extra metal clips (not the bolts) that I did not use. Is this a problem?

Thanks for the quick shipping Joe!

I send hardware that replaces "everything" you have, so if you having nothing, you can still mount the shield.
The plastic rivets (push clips) go in the recessed area and hold the center up, Use them.

Yutnaka · 06-23-2012, 10:07 AM

Just ordered it through your website! Can't wait to get it installed!

JJ-NISMO · 06-25-2012, 04:50 PM

Joe, I love this underpan. My car feels like it used to. 70, 80, 90, 100 mph, it does not matter; I do not get any vibrations now and the car feels great. This is better than the OEM option.

Thank you for the quick shipping. My only complaint is that no sticker came with it

BGTV8 · 06-25-2012, 05:38 PM

NOTE: Will not fit an engine that has a sump extender fitted ............... you require a number of 30mm spacers in order to make it fit ...

06-15-2012, 07:41 PM	#111 (permalink)
Joe@ZSpeed The370Z.com Sponsor Join Date: Mar 2011 Location: Ohio Posts: 1,304 Drives: Nissan Rep Power: 342999	All shields back in stock! __________________ Phone *937-506-7224* E-Mail Sales@Zspeed.com www.ZSPEED.com

06-15-2012, 09:18 PM	#113 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	So I was getting ready to install this today and I was expecting all sorts of complications because of the TT piping... So I bust out my dremel, toolbox, extra screws, spacers etc etc... FOR NOTHING, this thing just bolted right in! It is miles away from the pipes and everything lined up properly... 20 min later I was done... Thank you Joe! __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

06-23-2012, 07:24 AM	#116 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	I think he just sends extras. If you reuse your hardware you will have a little bit of everything left over. __________________ 2011 Twin Turbo PW nismo #113 - My Journal - My TT Build Thread [ GTM GTX Stg2 TT \|\| HKS EVC6 \|\| Custom CarPC \|\| F.I 3'' TDX CBE \|\| SB 6puck clutch/ZSpeed CSC \|\| BC BR Coilovers \|\| SPC camber arms \|\| Work VSS-X \|\| Custom Headlights \|\| PW:JDM CF Covers \|\| Seibon CF Engine Cover ]

06-23-2012, 10:07 AM	#118 (permalink)
Yutnaka Base Member Join Date: Apr 2011 Location: Columbus, GA Posts: 212 Drives: 2011 370z 7at GM Rep Power: 14	Just ordered it through your website! Can't wait to get it installed! __________________ Z1 Test Pipes, AAM S-Line Midpipe, Nismo Axleback, Takeda CAI, JDM fog light, Avant Garde M310 matte black, Tein springs, uprev 310whp-SOLD!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Vendor: G&M Performance	WildBill@G&M	New Forum Member	46	02-09-2011 01:44 PM
370zTUNE.com New Authorized Vendor For ARK PERFORMANCE INC	TeamARK	ARK Performance Inc	0	01-13-2011 03:52 PM
Aluminum Engine Under Shroud	MB370Z	Exterior & Interior	32	12-28-2010 08:20 PM
New Vendor: J-Tune Performance	J-Tune	North East Region	14	02-09-2010 09:45 AM

06-15-2012, 07:27 PM	#110 (permalink)
JJ-NISMO Enthusiast Member Join Date: Feb 2010 Location: SoCal Posts: 276 Drives: 09 NISMO 370Z PG Rep Power: 242	Payment sent! Cannot wait to get this bad boy installed. My car feels neutered and not even functional without the flap there.

06-23-2012, 04:13 AM	#115 (permalink)
JJ-NISMO Enthusiast Member Join Date: Feb 2010 Location: SoCal Posts: 276 Drives: 09 NISMO 370Z PG Rep Power: 242	Installed and everything looks good so far. After looking at the pictures, I just realized I mounted the plastic wheel well pieces on the wrong side and will have to change them tomorrow. I had a few black plastic pop rivets which I did not use. What are these for? I also had extra metal clips (not the bolts) that I did not use. Is this a problem? Thanks for the quick shipping Joe!

06-25-2012, 04:50 PM	#119 (permalink)
JJ-NISMO Enthusiast Member Join Date: Feb 2010 Location: SoCal Posts: 276 Drives: 09 NISMO 370Z PG Rep Power: 242	Joe, I love this underpan. My car feels like it used to. 70, 80, 90, 100 mph, it does not matter; I do not get any vibrations now and the car feels great. This is better than the OEM option. Thank you for the quick shipping. My only complaint is that no sticker came with it

06-25-2012, 05:38 PM	#120 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,503 Drives: 09 Nissan 370Z M6 Rep Power: 29907	NOTE: Will not fit an engine that has a sump extender fitted ............... you require a number of 30mm spacers in order to make it fit ...