ZSpeed Performance Aluminum Engine Undershrouds New Vendor Special!

XwChriswX · 03-28-2013, 02:55 PM

Order placed on the 24th, package arrived on the 27th.

Note: The bolts that come with it if you order the SS hardware kit are HEX Sockets. Joe, what size are they cause I need to go get a hex socket bit set.

And there isn't an "instructions" page included that I noticed, am I guessing it's just swap old parts 1 for 1, with washers?

Will the plastic rivets be re-used or are bolts going in their place now as well?

Joe@ZSpeed · 03-28-2013, 05:09 PM

Quote:

Originally Posted by XwChriswX

Order placed on the 24th, package arrived on the 27th.

Note: The bolts that come with it if you order the SS hardware kit are HEX Sockets. Joe, what size are they cause I need to go get a hex socket bit set.

And there isn't an "instructions" page included that I noticed, am I guessing it's just swap old parts 1 for 1, with washers?

Will the plastic rivets be re-used or are bolts going in their place now as well?

Remove/Replace, Pretty simple once you get down there.
You should have received 3 new plastic rivets for the middle part. The rest use bolts/washers

Hex key is a 5/32" , You can reuse the old bolts also which are 10mm head size.

XwChriswX · 03-29-2013, 07:19 PM

Quote:

Originally Posted by Joe@ZSpeed

Remove/Replace, Pretty simple once you get down there.
You should have received 3 new plastic rivets for the middle part. The rest use bolts/washers

Hex key is a 5/32" , You can reuse the old bolts also which are 10mm head size.

Just what I needed to know. I'll pick one up this weekend and knock it out.

03-28-2013, 02:55 PM	#1 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 454	Order placed on the 24th, package arrived on the 27th. Note: The bolts that come with it if you order the SS hardware kit are HEX Sockets. Joe, what size are they cause I need to go get a hex socket bit set. And there isn't an "instructions" page included that I noticed, am I guessing it's just swap old parts 1 for 1, with washers? Will the plastic rivets be re-used or are bolts going in their place now as well? __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Vendor: G&M Performance	WildBill@G&M	New Forum Member	46	02-09-2011 01:44 PM
370zTUNE.com New Authorized Vendor For ARK PERFORMANCE INC	TeamARK	ARK Performance Inc	0	01-13-2011 03:52 PM
Aluminum Engine Under Shroud	MB370Z	Exterior & Interior	32	12-28-2010 08:20 PM
New Vendor: J-Tune Performance	J-Tune	North East Region	14	02-09-2010 09:45 AM