Plug and Play Bypass Kit (DVD, NAV and backup Camera) Discussion

wheee! · 12-10-2010, 04:00 PM

Quote:

Originally Posted by bdl99

I think you will find that is exactly what I posted

The only difference is the diagram is from the harness perspective and mine was from the switch

1 2
3
4
5 6
Mine looking at switch

4 5
2
1
3 6
Diagram from manual looking at harness

1 (3) 2 (6)
3 (1)
4 (2)
5 (4) 6 (5)
Showing both (harness in brackets)

The reason for the metering voltages between (5) and (6) is due to metering before and after the bulb.

Actually I think you have it reversed Brian...

Pin 4 is top left on the switch, top right on the harness. It is a black wire (indicating ground I assume) and next to it is pin 5 (red wire) which is 12v constant.

As for 5 & 6, are you saying that that is strictly for the centre "seat" icon to light up? That would make sense too if the LED's for the heat indicators are pulling their voltage from pin 1 (12v)

Sorry if this is becoming semantic at all, just trying to be as clear as possible!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Backup Camera on 370Z	sbkim	Audio & Video	41	01-18-2023 07:29 PM
Backup Camera in 2010 with Nav	axeman71	Audio & Video	1	04-07-2013 02:09 PM
Backup camera and Reverse light	Trolling222	Audio & Video	8	05-10-2010 11:31 AM
OEM Backup camera for stock NAV!	z370z	Canada	2	02-05-2010 08:07 AM
Has anyone installed a backup camera w/stock nav?	trema	Audio & Video	10	03-03-2009 02:39 PM