Backup camera and Reverse light

Trolling222 · 05-04-2010, 11:50 AM

Thank you everybody for all your help. I have one more ? and i will be all done with my install finally.

I bought the pioneer avh-p3200bt and the pioneer Nd-bc4 backup camera. I have everything working and installed, however when i put the car in reverse the radio isn't switching to the camera. i have the reverse light wire from the stereo tapped into the ORANGE wire of the tail light. I can turn the camera on manually, but obviously i want it for reverse. Any Ideas??? Thanks, Matt

kenchan · 05-04-2010, 12:15 PM

hummm... that's odd. if there a function on the HU you need to turn on or something? i have the previous gen 3100 and i did a few setup steps and it worked just fine.

might want to check and then re-check the tap itself.

AK370Z · 05-04-2010, 12:36 PM

Quote:

Originally Posted by Trolling222

Thank you everybody for all your help. I have one more ? and i will be all done with my install finally.

I bought the pioneer avh-p3200bt and the pioneer Nd-bc4 backup camera. I have everything working and installed, however when i put the car in reverse the radio isn't switching to the camera. i have the reverse light wire from the stereo tapped into the ORANGE wire of the tail light. I can turn the camera on manually, but obviously i want it for reverse. Any Ideas??? Thanks, Matt

Hey Matt, same exact thing happen with my Kenwood as well. I was very confused. I opened the owners manual and realized there are settings that I had to change. Here's rear cam interruption setting on Kenwood DNX6140

http://www.the370z.com/audio-video/5...am-ak370z.html

R Cam (rear cam) interruption must be set to ON. It was initially off from factory. Also my headunit lets me mirror my image so that I can read license plates of cars behind me properly.

Play around with the settings and I'm sure you will get it to work. Please keep us posted.

kenchan · 05-04-2010, 12:59 PM

yah, i think i had a screen like that on my 3100 as well.

Trolling222 · 05-05-2010, 10:25 PM

HELP PLEASE.

Basically I just took apart my car again to make sure all the connections are correct. The only think i could possibly think of is that I need to tap into another wire besides the ORANGE one, or i have a broken head unit. I have played around with all the settings. any input will be of some help. thanks

kenchan · 05-06-2010, 11:09 AM

did you try running a 12v directly into that tap wire (for orange wire) and see if it switches over? if you are sure your HU setting is correct and 12v doesn't automatically switch it over, you got a failed unit.

Trolling222 · 05-07-2010, 01:37 PM

Thanks everyone. I finally got it working. the wire tapper that i used to get into the reverse light never actually tapped the wire, it didn't cut through the insulation. Thanks for all you help. Will post pics later after i was the car. thanks again

bigaudiofanat · 05-07-2010, 02:23 PM

Ya I never liked or never use wire taps, I splice the insulation and solder the wire directly to the other wire. This way the connection is much more reliable.

kenchan · 05-10-2010, 11:31 AM

if you use the right taps you shouldn't have this problem... they are color coded for the gauge wire used. sounds like the OP just used the bigger t-tap.

05-04-2010, 11:50 AM	#1 (permalink)
Trolling222 Base Member Join Date: Mar 2009 Location: WPB Florida Posts: 24 Drives: 09 Z Sport Rep Power: 16	Backup camera and Reverse light Thank you everybody for all your help. I have one more ? and i will be all done with my install finally. I bought the pioneer avh-p3200bt and the pioneer Nd-bc4 backup camera. I have everything working and installed, however when i put the car in reverse the radio isn't switching to the camera. i have the reverse light wire from the stereo tapped into the ORANGE wire of the tail light. I can turn the camera on manually, but obviously i want it for reverse. Any Ideas??? Thanks, Matt

05-07-2010, 02:23 PM	#8 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	Ya I never liked or never use wire taps, I splice the insulation and solder the wire directly to the other wire. This way the connection is much more reliable. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Backup Camera on 370Z	sbkim	Audio & Video	41	01-18-2023 07:29 PM
OEM Backup camera for stock NAV!	z370z	Canada	2	02-05-2010 08:07 AM
Reverse/Backup Light Signals	pty370z	Exterior & Interior	5	10-09-2009 01:09 PM
Reverse Wire for Backup Cam	bpd138	Audio & Video	4	05-05-2009 06:56 PM
Factory Nav Backup Camera in Action	SoCal 370Z	Exterior & Interior	8	03-19-2009 11:59 AM

05-04-2010, 12:15 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	hummm... that's odd. if there a function on the HU you need to turn on or something? i have the previous gen 3100 and i did a few setup steps and it worked just fine. might want to check and then re-check the tap itself.

05-04-2010, 12:59 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	yah, i think i had a screen like that on my 3100 as well.

05-06-2010, 11:09 AM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	did you try running a 12v directly into that tap wire (for orange wire) and see if it switches over? if you are sure your HU setting is correct and 12v doesn't automatically switch it over, you got a failed unit.

05-07-2010, 01:37 PM	#7 (permalink)
Trolling222 Base Member Join Date: Mar 2009 Location: WPB Florida Posts: 24 Drives: 09 Z Sport Rep Power: 16	Thanks everyone. I finally got it working. the wire tapper that i used to get into the reverse light never actually tapped the wire, it didn't cut through the insulation. Thanks for all you help. Will post pics later after i was the car. thanks again

05-10-2010, 11:31 AM	#9 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	if you use the right taps you shouldn't have this problem... they are color coded for the gauge wire used. sounds like the OP just used the bigger t-tap.