spacers

ResQguy · 06-18-2010, 06:12 PM

Quote:

Originally Posted by Josh@STILLEN

Sorry.. I probably didn't explain well enough. "Correctly" is probably a bad word to use.

It's much better to use a wheel with the offset to achieve the look that's you're looking for instead of running a spacer to acheive that.

The factory sport wheels are what they are, and guys who want a flush look add spacers (obviously they're not going to create a whole new wheel).

If you're getting wheels, ideally you would get some with the offset to acheive the level of flushness you'd like, instead of adding spacers to them. But this may only be possible if the wheel exists, or you're having custom wheels made, and can choose your offsets.

Ok, I get what you're saying. Since I'm not having custom wheels made, I guess I'll have to estimate the correct spacer size I'll need for the rims I plan on getting.

Josh@STILLEN · 06-18-2010, 06:35 PM

Quote:

Originally Posted by ResQguy

Ok, I get what you're saying. Since I'm not having custom wheels made, I guess I'll have to estimate the correct spacer size I'll need for the rims I plan on getting.

If the offset to achieve the look you want isn't available from that wheel, then yes. Exactly.

Bster · 06-18-2010, 02:33 AM

20mm H&R spacers F/R, lowered on H&R springs, and a good alignment got my rims to look flushed.

Plus the car handles better too!
Next mod: Anti sway bars.

370zee · 06-18-2010, 06:13 AM

Guys, i've just got my new set of wheels and i'm looking to get a set of spacers for the rear (10mm).

I have been trying to research and understand how it all works, from my understanding the H&R spacers are the ones to go for.

My question is the DRS model - where you need to replace your existing studs with the longer ones.. that sounds a bit tricky? Is it hard to remove the original studs? I was told it would require special equipment etc? is this true?

If not can't I just go the DRM model? The only problem is that the DRM minimum looks like 15mm.

Only other thing i could find was the KICS spacers 10mm which seem to be bolt on as well. I am a bit cautious as they are 2 pieces (the hubcentric part is seperate). Has anyone got any feedback for these ones, or can anyone tell me whether it is a difficult task to replace the original studs with the DRS model?

Appreciate any help.

Cheers

m4a1mustang · 06-18-2010, 07:36 AM

Quote:

Originally Posted by 370zee

Guys, i've just got my new set of wheels and the rears are not clearing the breaks, so i'm going to need a set of spacers for the rear (10mm).

I have been trying to research and understand how it all works, from my understanding the H&R spacers are the ones to go for.

My question is the DRS model - where you need to replace your existing studs with the longer ones.. that sounds a bit tricky? Is it hard to remove the original studs? I was told it would require special equipment etc? is this true?

If not can't I just go the DRM model? The only problem is that the DRM minimum looks like 15mm.

Only other thing i could find was the KICS spacers 10mm which seem to be bolt on as well. I am a bit cautious as they are 2 pieces (the hubcentric part is seperate). Has anyone got any feedback for these ones, or can anyone tell me whether it is a difficult task to replace the original studs with the DRS model?

Appreciate any help.

Cheers

Stud replacement is really easy. The only "tricky" bit to the rears is that you have to temporarily separate the parking brake assembly (very simple... there's a DIY on it here too). Other than that it's simply a matter of pounding out the old studs and pulling in the new (impact gun recommended!).

I am not a big fan of bolt-on spacers anyways... I don't really trust them.

TonyBPD · 06-18-2010, 06:51 PM

Quote:

Originally Posted by m4a1mustang

Stud replacement is really easy. The only "tricky" bit to the rears is that you have to temporarily separate the parking brake assembly (very simple... there's a DIY on it here too). Other than that it's simply a matter of pounding out the old studs and pulling in the new (impact gun recommended!).

I am not a big fan of bolt-on spacers anyways... I don't really trust them.

I ran H&R adapters/spacers on several VW's for years. Never had a single issue. Here is my 03 VW with Porsche wheels for reference.

m4a1mustang · 06-18-2010, 07:23 PM

Quote:

Originally Posted by TonyBPD

I ran H&R adapters/spacers on several VW's for years. Never had a single issue. Here is my 03 VW with Porsche wheels for reference.

Bolt-on?

It's really a personal thing for me. I look at bolt-on spacers as adding five additional points of failure. On the track, I'd rather be running a DRS spacer instead of a bolt-on... so that's what I went with. But that's just me, and like I said, I have no evidence to support my belief... I just feel more comfortable with DRS.

ResQguy · 06-18-2010, 10:38 AM

Quote:

Originally Posted by Bster

20mm H&R spacers F/R, lowered on H&R springs, and a good alignment got my rims to look flushed.

Plus the car handles better too!
Next mod: Anti sway bars.

What size/offset wheels do you have?

Mike · 06-18-2010, 08:09 AM

I didn't even need to separatetbe parking brake, with a little wiggling and rotating the rotor i was able to get the new studs in

m4a1mustang · 06-18-2010, 08:38 AM

Quote:

Originally Posted by Mike

I didn't even need to separatetbe parking brake, with a little wiggling and rotating the rotor i was able to get the new studs in

Nice. I just looked at the assembly and realized how easy it was to remove the spring and adjusting pin to move the two halves of the brake shoes out of the way so I did it that way.

TonyBPD · 06-18-2010, 07:45 PM

Yes bolt on. They were 5X100 to 5X130 and 25mm thick.

the_student · 07-07-2010, 04:46 AM

Installed 20mm spacers on my PW. It does not rub going straight but when I'm turning and hit a good sized bump I hear a scrape. I really cant tell where it is coming from...If anyone has any experience and has answers to fix it, let me know. I may have to roll the fenders?

ZForce · 07-08-2010, 12:05 AM

No problem here Mark, with H&R 20mm spacers on Fr with Sport rims. I know you are also running the sport rims. What brand spacers are you running? I have about 2k miles on my spacers and do not hear nor feel any scraping.

If you want to drop to 15mm, I have 2 sets to sell (H&R stud replacement). I also have 20 mm H&R stud replacement 2 sets.

the_student · 07-08-2010, 12:28 AM

Quote:

Originally Posted by ZForce

No problem here Mark, with H&R 20mm spacers on Fr with Sport rims. I know you are also running the sport rims. What brand spacers are you running? I have about 2k miles on my spacers and do not hear nor feel any scraping.

If you want to drop to 15mm, I have 2 sets to sell (H&R stud replacement). I also have 20 mm H&R stud replacement 2 sets.

I figured out what was rubbing. It wasn't the fender. It was the small plastic piece of fender liner that comes out near the bumper/fender line. Got an alignment and things look alot better. The car looks great. I can't wait to powdercoat my wheels.

ZForce · 07-08-2010, 11:27 AM

Kewl, glad it all worked out. I lub my 20 mm fr and 25mm Rr (H&R) Pass the word to ur bay area buds about my spacers 4sale. In 4 ur pics once the stance and wheels r done.

06-18-2010, 02:33 AM	#3 (permalink)
Bster Base Member Join Date: Feb 2009 Location: Singapore Posts: 174 Drives: '09 PW Z34 Manual Rep Power: 18	20mm H&R spacers F/R, lowered on H&R springs, and a good alignment got my rims to look flushed. Plus the car handles better too! Next mod: Anti sway bars. __________________ TEIN Monoflex with EDFC \| H&R 20mm Spacer \| SPC Rear Camber \| HKS Hi-Power \| Berks High Flow Cat \| Stillen G3 \| EVO R Rear Diffuser \| Blacked out headlights \| Z1 34Row Cooler \| Z1 SS Brake lines

06-18-2010, 06:13 AM	#4 (permalink)
370zee Base Member Join Date: Apr 2010 Location: Australia Posts: 32 Drives: 370z 2009 Rep Power: 17	Guys, i've just got my new set of wheels and i'm looking to get a set of spacers for the rear (10mm). I have been trying to research and understand how it all works, from my understanding the H&R spacers are the ones to go for. My question is the DRS model - where you need to replace your existing studs with the longer ones.. that sounds a bit tricky? Is it hard to remove the original studs? I was told it would require special equipment etc? is this true? If not can't I just go the DRM model? The only problem is that the DRM minimum looks like 15mm. Only other thing i could find was the KICS spacers 10mm which seem to be bolt on as well. I am a bit cautious as they are 2 pieces (the hubcentric part is seperate). Has anyone got any feedback for these ones, or can anyone tell me whether it is a difficult task to replace the original studs with the DRS model? Appreciate any help. Cheers Last edited by 370zee; 06-18-2010 at 08:28 PM.

06-18-2010, 08:09 AM	#9 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2187	I didn't even need to separatetbe parking brake, with a little wiggling and rotating the rotor i was able to get the new studs in __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spacers	tbss370z	Brakes & Suspension	20	03-17-2014 05:58 AM
Speaker Spacers	Mike@ZE	ZEnclosures	22	01-28-2012 07:03 PM
Spacers	tbss370z	Wheels & Tires	21	08-08-2009 09:14 AM
Eibach spacers	FricFrac	Brakes & Suspension	0	06-14-2009 06:18 AM
Spacers on stock Z?	ArtVandaleigh	Wheels & Tires	67	04-13-2009 10:44 AM

06-18-2010, 07:45 PM	#11 (permalink)
TonyBPD Track Member Join Date: May 2009 Location: South Jersey Posts: 614 Drives: 2012 VW Golf R Rep Power: 19	Yes bolt on. They were 5X100 to 5X130 and 25mm thick.

07-07-2010, 04:46 AM	#12 (permalink)
the_student Track Member Join Date: Jun 2009 Location: bay area Posts: 522 Drives: '13 LE 4runner Rep Power: 18	Installed 20mm spacers on my PW. It does not rub going straight but when I'm turning and hit a good sized bump I hear a scrape. I really cant tell where it is coming from...If anyone has any experience and has answers to fix it, let me know. I may have to roll the fenders?

07-08-2010, 12:05 AM	#13 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 22	No problem here Mark, with H&R 20mm spacers on Fr with Sport rims. I know you are also running the sport rims. What brand spacers are you running? I have about 2k miles on my spacers and do not hear nor feel any scraping. If you want to drop to 15mm, I have 2 sets to sell (H&R stud replacement). I also have 20 mm H&R stud replacement 2 sets.

07-08-2010, 11:27 AM	#15 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 22	Kewl, glad it all worked out. I lub my 20 mm fr and 25mm Rr (H&R) Pass the word to ur bay area buds about my spacers 4sale. In 4 ur pics once the stance and wheels r done.