Wheel Offset Discussion Thread... How far can we go?

jtgarza3 · 09-23-2013, 09:28 AM

Does any one know if 19x10.5 +25 will fit the front of the Z? and if so what tire size do you recommend?

maximusz · 10-17-2013, 02:00 AM

Ok guys have some forgestar f14
19x9.5 +20
19x11 + 15

Going to be stock height for awhile but eventually lower

Going to run stock nismo tire sizes until I need new tires

Will it work?

Zwolf81 · 10-20-2013, 10:37 PM

I'm right there with maximusz. I swapped over my 350 wheels (19x10 +15 255/35 up front and 19x10 +15 285/35 out back) and I'm about to buy 19x11 +15 for my back two. I'm lowered on swifts and would like to know if this would work as well and a tire recommendation.

Zwolf81 · 10-30-2013, 10:41 PM

Anybody?

thongthumper · 03-01-2014, 01:59 PM

Will 20x10 -2 rear, 20x9 +38 front work? 285/25 zr 20 rear tires

Xplicit97 · 03-02-2014, 05:42 AM

So I have a Nismo with Ark springs all factory camber arms. Im curious what size / offset, wheels/tires I can fit with minimum neg camber and not stretching tires. Obviously I don't want to rub either.I'm Looking at 20" wheels. Thanks

Sent from my SPH-L710 using Tapatalk 2

Kmccarthy714 · 03-15-2014, 07:14 PM

I Have 19x9.5 +12 Front
19x10.5 +22 rear

Can i run stock tires safely, and without stretch? or do i need to bump them up if so what sizzes?

Awwthentic · 04-14-2014, 01:32 AM

Hey guys, I been researching sooo much on rim sizes haha. The look I want the most agressiveness but sit flush with the fender.

I'm on swift drop springs no camber kit YET.

I have 19x9.5 -2 and 19.10 -11.

These are laying around from my Infiniti build and was wondering if I added a 10mm to the front will it sit flush? They dont clear the BBK and I tried a 5/16 spacer but still hit caliper =/
So couldnt see if it stuck out past the fender with them on or not.

Here's the wheels

makstraw · 06-16-2014, 05:50 PM

Quote:

Originally Posted by Awwthentic

Hey guys, I been researching sooo much on rim sizes haha. The look I want the most agressiveness but sit flush with the fender.

I'm on swift drop springs no camber kit YET.

I have 19x9.5 -2 and 19.10 -11.

These are laying around from my Infiniti build and was wondering if I added a 10mm to the front will it sit flush? They dont clear the BBK and I tried a 5/16 spacer but still hit caliper =/
So couldnt see if it stuck out past the fender with them on or not.

Here's the wheels

Honestly I dont think those will work regardless.... The faces are flat and are not going to clear the Akebono's.. Do yourself a favor, sell those to the VIP crowd and buy yourself some new wheels with specs for a 370z... Hit up Mark @ Ravspec for advice and prices.

sktvietdragon · 07-30-2014, 11:32 PM

Would this be too aggressive? I'm currently on -2.5 camber in front and -3.3 camber in the rear. I'm planning to get this set up...
19x10 +0 with 245/35
19x11 +0 with 275/35
Opinion?? If you have pictures, please post it up. I wanna see how it sit

zefaulter · 08-06-2014, 10:36 AM

Quote:

Originally Posted by sktvietdragon

Would this be too aggressive? I'm currently on -2.5 camber in front and -3.3 camber in the rear. I'm planning to get this set up...
19x10 +0 with 245/35
19x11 +0 with 275/35
Opinion?? If you have pictures, please post it up. I wanna see how it sit

This should help a little
Scroll up to see photos

Awwthentic · 11-29-2014, 04:18 PM

Quote:

Originally Posted by makstraw

Honestly I dont think those will work regardless.... The faces are flat and are not going to clear the Akebono's.. Do yourself a favor, sell those to the VIP crowd and buy yourself some new wheels with specs for a 370z... Hit up Mark @ Ravspec for advice and prices.

The rears fit perfectly with no spacers and doesnt stick out.

I bought some 15mm spacers and placed them on the front to clear BBK but stick out way to damn much. I guess its time to either re-barrel the fronts or sell them and get some other options.

Awwthentic · 07-06-2017, 04:59 PM

Quote:

Originally Posted by makstraw

Honestly I dont think those will work regardless.... The faces are flat and are not going to clear the Akebono's.. Do yourself a favor, sell those to the VIP crowd and buy yourself some new wheels with specs for a 370z... Hit up Mark @ Ravspec for advice and prices.

Yea I tried the wheels and the rears fit perfect.
The fronts hit the caliper just so slightly and poked out too much.

I sold em.

Still havent got any wheels for my Z

Camcam1616 · 05-30-2014, 06:29 PM

currently running

19x10.5-44
19x12-54

Xplicit97 · 06-10-2014, 01:33 AM

I'm curious I'm looking at Forgestar F10's. I would like to get a 20X10 F and a 20X11 or 20X12" R combination. What offsets will I need to get to be pretty close to flush, and clear BBK? I figure the 20X10 will need to be somewhere around the +30 range, but what would a 20X11 or 20X12 need to be? This will be going on a 2011 Nismo dropped on ark springs 1.5"R 1.75"F with stock camber arms. I don't want any crazy negative camber or stretched tires, preferably a meatier set up. I'm more about function than form. Thanks for the info

09-23-2013, 09:28 AM	#1 (permalink)
jtgarza3 Base Member Join Date: Sep 2010 Location: Corpus Christi, Texas Posts: 89 Drives: 370z Roadster Rep Power: 15	Does any one know if 19x10.5 +25 will fit the front of the Z? and if so what tire size do you recommend? __________________ Performance\|\|\| Stillen G2 Intake, Invidia Gemini CBE, CNT HFC, UpRev Tune\|\|\| Exterior \|\|\| 20" Vertini Drifts Gold, BC Coilovers, Evo-R Carbon Fangs, JDM Fog light \|\|\|Interior\|\|\| Jl 8w7, Jl 250/v2, Red GT-R Start Button, Razo Shifter \|\|\|

03-02-2014, 05:42 AM	#6 (permalink)
Xplicit97 Track Member Join Date: May 2011 Location: Bremerton, WA Age: 46 Posts: 875 Drives: 2011 Nismo 370Z Rep Power: 301	So I have a Nismo with Ark springs all factory camber arms. Im curious what size / offset, wheels/tires I can fit with minimum neg camber and not stretching tires. Obviously I don't want to rub either.I'm Looking at 20" wheels. Thanks Sent from my SPH-L710 using Tapatalk 2 __________________ [B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels

04-14-2014, 01:32 AM	#8 (permalink)
Awwthentic Base Member Join Date: Jul 2013 Location: SE TX Posts: 55 Drives: 13' 370z Rep Power: 12	Hey guys, I been researching sooo much on rim sizes haha. The look I want the most agressiveness but sit flush with the fender. I'm on swift drop springs no camber kit YET. I have 19x9.5 -2 and 19.10 -11. These are laying around from my Infiniti build and was wondering if I added a 10mm to the front will it sit flush? They dont clear the BBK and I tried a 5/16 spacer but still hit caliper =/ So couldnt see if it stuck out past the fender with them on or not. Here's the wheels Last edited by Awwthentic; 04-14-2014 at 02:31 AM.

07-30-2014, 11:32 PM	#10 (permalink)
sktvietdragon Base Member Join Date: Feb 2009 Location: DFW, Texas Posts: 160 Drives: Z34 Rep Power: 17	Would this be too aggressive? I'm currently on -2.5 camber in front and -3.3 camber in the rear. I'm planning to get this set up... 19x10 +0 with 245/35 19x11 +0 with 275/35 Opinion?? If you have pictures, please post it up. I wanna see how it sit __________________ 05 DC5 Milano Red Base (Auto) SOLD 09 Z34 Magnetic Black Base w/ Sport Package (6 speed)

05-30-2014, 06:29 PM	#14 (permalink)
Camcam1616 Base Member Join Date: Aug 2013 Location: Utah Posts: 129 Drives: 09 370z touring 6sp Rep Power: 12	currently running 19x10.5-44 19x12-54 zefaulter likes this.

10-17-2013, 02:00 AM	#2 (permalink)
maximusz Base Member Join Date: Apr 2013 Location: orange, tx Posts: 138 Drives: '10 red 370z nismo Rep Power: 13	Ok guys have some forgestar f14 19x9.5 +20 19x11 + 15 Going to be stock height for awhile but eventually lower Going to run stock nismo tire sizes until I need new tires Will it work?

10-20-2013, 10:37 PM	#3 (permalink)
Zwolf81 Base Member Join Date: Oct 2013 Location: Murfreesboro TN Posts: 12 Drives: 09 370z MB 7AT Rep Power: 12	I'm right there with maximusz. I swapped over my 350 wheels (19x10 +15 255/35 up front and 19x10 +15 285/35 out back) and I'm about to buy 19x11 +15 for my back two. I'm lowered on swifts and would like to know if this would work as well and a tire recommendation.

10-30-2013, 10:41 PM	#4 (permalink)
Zwolf81 Base Member Join Date: Oct 2013 Location: Murfreesboro TN Posts: 12 Drives: 09 370z MB 7AT Rep Power: 12	Anybody?

03-01-2014, 01:59 PM	#5 (permalink)
thongthumper Base Member Join Date: Dec 2013 Location: Cincinnati, Ohio Posts: 1 Drives: 2010 370 White 6spd Rep Power: 12	Will 20x10 -2 rear, 20x9 +38 front work? 285/25 zr 20 rear tires

03-15-2014, 07:14 PM	#7 (permalink)
Kmccarthy714 Base Member Join Date: May 2013 Location: Orange County, NY Posts: 77 Drives: 09 Brilliant Silver Rep Power: 13	I Have 19x9.5 +12 Front 19x10.5 +22 rear Can i run stock tires safely, and without stretch? or do i need to bump them up if so what sizzes?

06-10-2014, 01:33 AM	#15 (permalink)
Xplicit97 Track Member Join Date: May 2011 Location: Bremerton, WA Age: 46 Posts: 875 Drives: 2011 Nismo 370Z Rep Power: 301	I'm curious I'm looking at Forgestar F10's. I would like to get a 20X10 F and a 20X11 or 20X12" R combination. What offsets will I need to get to be pretty close to flush, and clear BBK? I figure the 20X10 will need to be somewhere around the +30 range, but what would a 20X11 or 20X12 need to be? This will be going on a 2011 Nismo dropped on ark springs 1.5"R 1.75"F with stock camber arms. I don't want any crazy negative camber or stretched tires, preferably a meatier set up. I'm more about function than form. Thanks for the info __________________ [B]2011 Brilliant Silver Nismo 370Z # 0305, 15 Nismo wide body conversion, Motordyne E370/Art pipes, Stillen G3, Airlift suspension,20X10 /20X12 Avant Garde F111 forged wheels Last edited by Xplicit97; 06-10-2014 at 01:37 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z offset	azn370z	Wheels & Tires	28	10-06-2010 09:53 PM
Need Help Indentifing a wheel ..	Q_USAF	Wheels & Tires	2	04-12-2009 11:06 PM
RAYS wheel nut.?	Chan Chee Hoe	Wheels & Tires	4	03-15-2009 09:02 PM
Peak Power discussion...	klubbheads	Engine & Drivetrain	4	02-19-2009 08:52 PM
Discussion Thread: 370z pictures from Europe 11.05.08	AK370Z	Nissan 370Z General Discussions	17	11-09-2008 04:04 PM