Enkei RPF1's

Red__Zed · 07-28-2010, 06:54 PM

Anyone know how a non-staggered set up like this would work?

MY350Z.COM Forums

I would love to be running 285's all around.

LateralG'z · 07-29-2010, 05:29 AM

Those are some nice rims, I want to see them in bronze

jpmotor · 07-29-2010, 11:45 AM

18x9 +35 is NOT flush....not even close

try +25 or lower

18x9.5 +18?

OMGWTFBBQ · 07-29-2010, 12:25 PM

Will those sizes clear the Akebonos in the front though?

Red__Zed · 08-17-2010, 05:31 PM

Quote:

Originally Posted by jpmotor

18x9 +35 is NOT flush....not even close

try +25 or lower

18x9.5 +18?

18X9.5 +15 F

18X10.5 +15 R

Could I get away with running something like these fitments? I'm not sure how aggressive I can go in the front.

SE · 08-17-2010, 05:34 PM

Quote:

Originally Posted by DanGizinski

18X9.5 +15 F

18X10.5 +15 R

Could I get away with running something like these fitments? I'm not sure how aggressive I can go in the front.

That's a really good setup for track. The fronts will be a little difficult to fit with wide tires though. Maybe 245 at most? Or 265 with a lot of camber.

We have a set in flat black 18x9.5 +15 18x10.5 +15 in stock right now. PM me if you're interested.

Red__Zed · 08-17-2010, 05:40 PM

Quote:

Originally Posted by Victor@SpeedElement

That's a really good setup for track. The fronts will be a little difficult to fit with wide tires though. Maybe 245 at most? Or 265 with a lot of camber.

We have a set in flat black 18x9.5 +15 18x10.5 +15 in stock right now. PM me if you're interested.

I'm interested, but concerned about fitment issues. You think I'd be smarter to snag something with a less aggressive offset?

SE · 08-17-2010, 05:46 PM

Depends on what tire you want to run up front and whether you'll be tracking your car. If you're tracking I'd suggest running a higher offset with a wider tire if your class allows it. If not then go for the 245 with +15 fronts.

SE · 08-17-2010, 05:48 PM

I'll probably be slapping on some 18inch square setup wheels just to see what it looks like on the shop car at the end of the week.

Red__Zed · 08-17-2010, 05:52 PM

Quote:

Originally Posted by Victor@SpeedElement

I'll probably be slapping on some 18inch square setup wheels just to see what it looks like on the shop car at the end of the week.

Ah. I think I will wait to see how that turns out. I would really like to see how that works out.

SE · 08-17-2010, 06:18 PM

Sounds good.

cossie1600 · 08-17-2010, 06:27 PM

My 9.5" wheel with 35 offset sticks past the fender slightly, it didn't rub with 265 race rubber.

Waiz · 08-17-2010, 08:45 PM

These are DannyGT's AME Tracer TM02's 19x9.5F 19x10.5R (+22 all around).

The design is very similar to RPF1's since they are made by the Enkei in Japan.

DannyGT's Journal/Progress

Jamaica · 08-17-2010, 08:51 PM

looks good to me.

Mike · 08-17-2010, 09:05 PM

search for my posts in the wheel forum. I did try this wheel and it didn't work but it was over a year ago and I don't remember the specs. They are in my thread though. They may have new fitments since then also.

07-28-2010, 06:54 PM	#16 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 119	Anyone know how a non-staggered set up like this would work? MY350Z.COM Forums I would love to be running 285's all around. Last edited by Red__Zed; 07-29-2010 at 07:47 AM.

07-29-2010, 05:29 AM	#17 (permalink)
LateralG'z Track Member Join Date: Nov 2009 Location: Oklahoma Posts: 876 Drives: 370z Rep Power: 16	Those are some nice rims, I want to see them in bronze __________________ 2010 Mag Black, 6MT,

07-29-2010, 11:45 AM	#18 (permalink)
jpmotor Base Member Join Date: Apr 2010 Location: SoCal Posts: 243 Drives: BNR 16G'd Legacy GT Rep Power: 14	18x9 +35 is NOT flush....not even close try +25 or lower 18x9.5 +18? __________________ http://jpmotor.net/images/Signature2.png 【Exclusive】Five:AD S5:F Stealth Chrome! 370Z Fitment 19x9.5 \| 19x10.5【Exclusive】 David \| (626) 789-5229 david@jpmotor.net \| AIM: jpmotor

08-17-2010, 09:05 PM	#30 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	search for my posts in the wheel forum. I did try this wheel and it didn't work but it was over a year ago and I don't remember the specs. They are in my thread though. They may have new fitments since then also. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WEDS & ENKEI SPRING-TO-SUMMER SALE l RPF1'S, NT03'S, SA55M'S!	DriveLineEric	Tires/Wheels	70	01-17-2013 04:23 PM
Anyone running Enkei RPF1's?	TonyBPD	Wheels & Tires	1	06-24-2010 04:08 PM
ENKEI - NOW AVAILABLE AT DRIVELINE l RPF1'S AND NT03'S - LOWEST PRICES GUARANTEED!!	DriveLineEric	Tires/Wheels	27	05-04-2010 05:12 PM
Enkei RPF1 - Does it Fit?	cotizi	Wheels & Tires	1	04-28-2010 07:11 PM

07-29-2010, 12:25 PM	#19 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	Will those sizes clear the Akebonos in the front though?

08-17-2010, 05:46 PM	#23 (permalink)
SE A True Z Fanatic Join Date: Jan 2010 Location: San Jose, CA Posts: 4,236 Drives: 370z/STI/EVO X/IS-F Rep Power: 23	Depends on what tire you want to run up front and whether you'll be tracking your car. If you're tracking I'd suggest running a higher offset with a wider tire if your class allows it. If not then go for the 245 with +15 fronts.

08-17-2010, 05:48 PM	#24 (permalink)
SE A True Z Fanatic Join Date: Jan 2010 Location: San Jose, CA Posts: 4,236 Drives: 370z/STI/EVO X/IS-F Rep Power: 23	I'll probably be slapping on some 18inch square setup wheels just to see what it looks like on the shop car at the end of the week.

08-17-2010, 06:18 PM	#26 (permalink)
SE A True Z Fanatic Join Date: Jan 2010 Location: San Jose, CA Posts: 4,236 Drives: 370z/STI/EVO X/IS-F Rep Power: 23	Sounds good.

08-17-2010, 06:27 PM	#27 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 29	My 9.5" wheel with 35 offset sticks past the fender slightly, it didn't rub with 265 race rubber.

08-17-2010, 08:45 PM	#28 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,257 Drives: Z33 & GE8 Rep Power: 459	These are DannyGT's AME Tracer TM02's 19x9.5F 19x10.5R (+22 all around). The design is very similar to RPF1's since they are made by the Enkei in Japan. DannyGT's Journal/Progress

08-17-2010, 08:51 PM	#29 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	looks good to me.