The "Will it fit?" thread

[russ138]

I've seen guys with 350Zs run this but will it work on my 370z? I've search all over but can't seem to find anyone with solid info.

This is a square track setup

Front: Enkei RPF1 18x10.5 +15 (275/35/18 r-comp) (about 3deg neg camber)
Rear: Enkei RPF1 18x10.5 +15 (275/35/18 r-comp) (w/ 10 or 15mm spacer) (about 2deg neg camber)

The camber and 275s will help with the front but is it enough? I can always stretch the fender slightly. Thanks everyone.

[jchammond]

Originally Posted by russ138

I've seen guys with 350Zs run this but will it work on my 370z? I've search all over but can't seem to find anyone with solid info.

This is a square track setup

Front: Enkei RPF1 18x10.5 +15 (275/35/18 r-comp) (about 3deg neg camber)
Rear: Enkei RPF1 18x10.5 +15 (275/35/18 r-comp) (w/ 10 or 15mm spacer) (about 2deg neg camber)

The camber and 275s will help with the front but is it enough? I can always stretch the fender slightly. Thanks everyone.

I'm thinking HotRodz uses this square size wheel's @the track; unsure make or tire's/exact alignment specs.

[Hotrodz]

Originally Posted by jchammond

I'm thinking HotRodz uses this square size wheel's @the track; unsure make or tire's/exact alignment specs.

I'm run Nt 01s that are 18x10.5 +30 square. I run no spacers up front and 15mm in the rear. They are wrapped in r888 295 30s. There are a number of guys running the setup he is at 275 or 285 square. I will be making the change to 315 30 square on the next set of rubber...go big or go home lol!

Sent from my SM-N910P using Tapatalk

[russ138]

Originally Posted by Hotrodz

I'm run Nt 01s that are 18x10.5 +30 square. I run no spacers up front and 15mm in the rear. They are wrapped in r888 295 30s. There are a number of guys running the setup he is at 275 or 285 square. I will be making the change to 315 30 square on the next set of rubber...go big or go home lol!

Sent from my SM-N910P using Tapatalk

Thanks Hotrodz, so if you added a 15mm spacer to your front, that would make it a +15 which is what I'd be looking at with the RPF1. Do you think you'd be able to squeeze that in with some camber?

[Hotrodz]

Originally Posted by russ138

Thanks Hotrodz, so if you added a 15mm spacer to your front, that would make it a +15 which is what I'd be looking at with the RPF1. Do you think you'd be able to squeeze that in with some camber?

The only question would be if they would clear sport brakes. I think they do as I know others than run that set up.

[Steeles350]

Originally Posted by russ138

I've seen guys with 350Zs run this but will it work on my 370z? I've search all over but can't seem to find anyone with solid info.

This is a square track setup

Front: Enkei RPF1 18x10.5 +15 (275/35/18 r-comp) (about 3deg neg camber)
Rear: Enkei RPF1 18x10.5 +15 (275/35/18 r-comp) (w/ 10 or 15mm spacer) (about 2deg neg camber)

The camber and 275s will help with the front but is it enough? I can always stretch the fender slightly. Thanks everyone.

Currently running this on stock suspension. There's some poke with no lowering or camber (setup actually came of my 350). For track I think the setup would be good. I've had no issues on the street other than the setup looks tiny on the car. Makes me want 19s or at least some 45s. Inch smaller diameter from stock setup. But the tires had like 3500 miles on them before the switch

[russ138]

Originally Posted by Steeles350

Currently running this on stock suspension. There's some poke with no lowering or camber (setup actually came of my 350). For track I think the setup would be good. I've had no issues on the street other than the setup looks tiny on the car. Makes me want 19s or at least some 45s. Inch smaller diameter from stock setup. But the tires had like 3500 miles on them before the switch

Awesome, thanks for the info. Any pictures of your setup @Steeles350? And thank you @jchammond & @Hotrodz as well. I guess I'll give it a shot and hope for the best!

[Steeles350]

Originally Posted by russ138

Awesome, thanks for the info. Any pictures of your setup @Steeles350? And thank you @jchammond & @Hotrodz as well. I guess I'll give it a shot and hope for the best!

Yeah let me get home to the laptop and get a couple hosted and I'll post back

[Hotrodz]

Originally Posted by russ138

Awesome, thanks for the info. Any pictures of your setup @Steeles350? And thank you @jchammond & @Hotrodz as well. I guess I'll give it a shot and hope for the best!

HPDE 1-2 Turn 4 Front CVR_8033_Feb1917_CaliPhoto by Hotrod 370z, on Flickr

HPDE 1-2 Turn 4 speed shot CVR_8115_Feb1917_CaliPhoto by Hotrod 370z, on Flickr