The "Will it fit?" thread

[sexZness]

Originally Posted by carlitos_370z

Well for me the tire setup that you are going to use on your 19" is good (255/35/19 & 305/30/19) now for the wheels in my personal experience, my first first of aftermarket wheels on the Z, I install the Zedd CC10 in 19x9.5+12 & 19x11+15 and the tires that I use was 245/40/19 and 285/35/19 . I love that wheel setup and no rubbing issues at all just in hard bumps... nothing to worry about. Also you have to adjust the camber to make it work but the same nothing to worry about. Here are some pics of my Z with that wheel setup

( Click to show/hide )

Z shoot 1 by Carlos Berrios, on Flickr

front2 by Carlos Berrios, on Flickr

REAR by Carlos Berrios, on Flickr

image (4) by Carlos Berrios, on Flickr

I hope that can help you in something haha! if you have a question of my 19"wheels setup let me know!

Thanks for all the pics and info. This is why I wanna find out the real offset of my current fronts because they are flushed with my fenders but I was told they had an offset of +35

[carlitos_370z]

Originally Posted by sexZness

Thanks for all the pics and info. This is why I wanna find out the real offset of my current fronts because they are flushed with my fenders but I was told they had an offset of +35

damn! Do you check the inside of the wheels ? maybe there are the specs of the wheels... or the other thing that you can do is check on google search under the brand and model of your wheels and see all the specs

[clkio]

265/35/19 u won't rub, I am running 275/35/19 28+ offset 10" rim in the front it never rubs (lowered on swift). What makes you think it will rub?

Sent from my Nexus 6P using Tapatalk

[sexZness]

Originally Posted by clkio

265/35/19 u won't rub, I am running 275/35/19 28+ offset 10" rim in the front it never rubs (lowered on swift). What makes you think it will rub?

Sent from my Nexus 6P using Tapatalk

Because I used to run 255/35/20s on 9.5s with supposedly +35 offset and it rubbed so I had to go to 255/30/20s and that's what I've been running for a while with no rubbing issues. The new set-up is going to have the same overall diameter as what I have now BUT shaved 5mm off the offset so it's gonna push it out even more, even if it's just 5mm. Like I said, I wanna confirm that the fronts are actually +35 and not less. Is that something I can physically measure off the wheels?

[sexZness]

Here are a couple more of my current/old set-up

[carlitos_370z]

Originally Posted by sexZness

Here are a couple more of my current/old set-up

Looks really really good! Btw I think is little hard to find the offsets of your wheels. Maybe in this thread someone can help you!

370Z Special! Forgestar F14 Deep & Super Deep Concave- NO WAIT TIME!

[sexZness]

Originally Posted by carlitos_370z

Looks really really good! Btw I think is little hard to find the offsets of your wheels. Maybe in this thread someone can help you!

370Z Special! Forgestar F14 Deep & Super Deep Concave- NO WAIT TIME!

They're custom ordered but I just don't know what offsets I was sent :/

Thanks for all your help! Even tho we just opened up a whole nutha can'O worms

[kenchan]

hard to tell from the picts but the old setup appears more aggressive than the new setup?

is this the old? same as the car pict with the painter's tape?


this looks more like 9.5 ET35 at that height..hard to tell from the picts.


do you have any picts diagonally from the rear? usually poke shows up easier in that angle.

[sexZness]

Right, those 2 are the same set-up

[kenchan]

Originally Posted by sexZness

Right, those 2 are the same set-up

okay, yah, then i think your current fronts are 9.5 ET35.

dang, u turned your front tires in that shot. i can't tell how much more room u have for spacers. u want them flush, yes?
do you have that angle with the front tires pointing straight?

[sexZness]

Originally Posted by kenchan

okay, yah, then i think your current fronts are 9.5 ET35.

dang, u turned your front tires in that shot. i can't tell how much more room u have for spacers. u want them flush, yes?
do you have that angle with the front tires pointing straight?

weeeeeellllllllllllllllll it seems, after much debate and lurking the forum, i've come to the conclusion that there's no way my current wheels have an offset of +35... i was looking at the stocks (+47) and how they sat on the Z. there's no way 12mm could push my set-up this far out.

So, I've confirmed my offset with Forgestar: +15 on 9.5" front, +5 on 11" rear

Thank you all for your help with this!

[kenchan]

like i said, its hard to tell from the shots u posted.

[sexZness]

Originally Posted by kenchan

like i said, its hard to tell from the shots u posted.

I know~ i do appreciate the effort, tho!

[GeauxTigers1]

Hey guys,

Need help on track wheels. Have someone selling Varrstoen 18 x9.5 +22 and 19 x 10.5 + 22. Trying to figure out if these will fit the 370z with our Akebono brakes. The rear will have 315 tires and front will be 295s. Hoping for a drag setup at first and then possible get more rears with 295 for road course, but that'll be in the near future.

Thanks for the help everyone!

[JerryDeluxe]

Quick question? Will the 35mm ray lugs fit the te37sl or do i need the 42mm or 50mm. Thanks