The "Will it fit?" thread

solidus · 07-22-2016, 12:37 PM

Quote:

Originally Posted by cjwsrt6

19x9.5. With 35 mm offset, anyone running these all around, someone offered me a trade but I'm really wanting to run 285 front and 305 rear, any input would be awesome

I run 285/35 fr 325/30 r but on Nismo wheels, which are 10.5 in the rear. I think maybe a 295 might be as far as you can make it on 9.5's. The front will definitely be ok with 285 but the rear is

ChaseZ · 08-09-2016, 12:51 PM

Quote:

Originally Posted by solidus

I run 285/35 fr 325/30 r but on Nismo wheels, which are 10.5 in the rear. I think maybe a 295 might be as far as you can make it on 9.5's. The front will definitely be ok with 285 but the rear is

Can you post up some shots of your 325's

I figured they would fit on a 10.5 Nismo rear but love to see the fitment. No spacers I take it?

solidus · 08-10-2016, 09:12 AM

Quote:

Originally Posted by ChaseZ

Can you post up some shots of your 325's

I figured they would fit on a 10.5 Nismo rear but love to see the fitment. No spacers I take it?

Fits all day, rides great and does'nt bow out. And nope no spacers. 285 up front is awesome also.

ChaseZ · 08-10-2016, 12:23 PM

Quote:

Originally Posted by solidus

Fits all day, rides great and does'nt bow out. And nope no spacers. 285 up front is awesome also.

Thanks, appreciate your confirming my thoughts.

How close to flush are the fronts with those 285's?

OptionZero · 07-15-2016, 09:55 PM

sunk as hell so its gonna be ugly

305 rear is too big

jesse280z · 07-22-2016, 12:17 PM

i have a 2010 touring 370z with oem wheeeles. what size spacers do i need to make my wheeles flush with the side of my car?

right now im thinking of getting these for the Back

and these for the Front

/Angelo350Z/ · 08-09-2016, 04:34 PM

Quote:

Originally Posted by jesse280z

i have a 2010 touring 370z with oem wheeeles. what size spacers do i need to make my wheeles flush with the side of my car?

right now im thinking of getting these for the Back

and these for the Front

Sizes are correct, 20/25 are what you need for OEM Sport wheels. You could even try 25/25, I always felt I could've gone with the latter when I ran stock wheels with spacers. I'm not familiar with that brand though.

clkio · 08-09-2016, 12:54 PM

325 on 10.5 rim? I wouldn't go any lower than 11" wide and that's still not wide enough for 325. 12" width recommended

Sent from my Nexus 6P using Tapatalk

ChaseZ · 08-10-2016, 01:32 PM

Looks great. Even at +40 those fronts fill the wheel well nicely.

Found some wheels I want but can only get 19x9.5 +22 fronts, and I want them just barely inside the wheel well so looks like I'll have to give them a pass.

Ketchi · 08-12-2016, 03:24 PM

Really want Rohana RC10s but I want 19s and not 20s and I'm trying to figure out if the 19x8.5 +35mm would fit in the front and 19x9.5 +20mm in the rear?

jchammond · 08-12-2016, 05:31 PM

Quote:

Originally Posted by Ketchi

Really want Rohana RC10s but I want 19s and not 20s and I'm trying to figure out if the 19x8.5 +35mm would fit in the front and 19x9.5 +20mm in the rear?

They will easily fit.

/Angelo350Z/ · 08-12-2016, 05:45 PM

Quote:

Originally Posted by Ketchi

Really want Rohana RC10s but I want 19s and not 20s and I'm trying to figure out if the 19x8.5 +35mm would fit in the front and 19x9.5 +20mm in the rear?

You'd want to get spacers with those widths and offsets.

teggy · 08-13-2016, 08:27 PM

New too the Z platform and looking for wheels for my nismo Z what would i have too do too make a 20x11 +10 Fit in the rear wanted too run a 285/20/30 for a tire in rear with Bc coils, im lowered so there is maybe a finger of wheel gap.

OptionZero · 08-14-2016, 08:37 PM

the answer is always roll + camber

pfregeolle · 08-15-2016, 01:48 PM

Does anyone run 18" Step Lip wheels, such as WORK Meister S1-3P, on their car equipped with Akebono's?

Trying to gauge and see if the Ake's will fit under an 18" step wheel. They fit under my WORK Emotion CR Kai (just barely) and Kiwami just fine. I've seen someone run SSR SP1's with a step lip and Akebono's. But not WORK's.

Any help or input is much appreciated!

08-15-2016, 01:48 PM	#15 (permalink)
pfregeolle Base Member Join Date: Apr 2010 Location: Annapolis, MD Posts: 120 Drives: 2006 Nissan 350Z Rep Power: 16	Does anyone run 18" Step Lip wheels, such as WORK Meister S1-3P, on their car equipped with Akebono's? Trying to gauge and see if the Ake's will fit under an 18" step wheel. They fit under my WORK Emotion CR Kai (just barely) and Kiwami just fine. I've seen someone run SSR SP1's with a step lip and Akebono's. But not WORK's. Any help or input is much appreciated! __________________ (WWW.TEAMBUSHIDO.BLOGSPOT.COM)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official The370Z "Hot Girls with Hot cars" thread NSFW 01.01.09	AK370Z	Gentleman's Club	187	01-12-2011 12:24 AM
why did the thread "Sharing a bad experience with my 370Z" get closed?	TheSnakeJake	Nissan 370Z General Discussions	1	03-26-2010 11:35 PM
Why there isn't a "Monterey Blue"370Z thread?	Devil Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	9	08-24-2009 01:55 PM
Official "Guess the Stig's Time" Thread	ResIpsa	Nissan 370Z General Discussions	11	07-27-2009 09:45 PM
Official "Nissan 370Z spotted in Japan" Thread	AK370Z	Nissan 370Z Photos / Spyshots / Video / Media Gallery	120	05-01-2009 09:30 AM

07-15-2016, 09:55 PM	#5 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,270 Drives: 15 370Z Nismo 6MT Rep Power: 214101	sunk as hell so its gonna be ugly 305 rear is too big

07-22-2016, 12:17 PM	#6 (permalink)
jesse280z Base Member Join Date: Mar 2016 Location: southern california Posts: 4 Drives: 280zx, 370z Rep Power: 10	i have a 2010 touring 370z with oem wheeeles. what size spacers do i need to make my wheeles flush with the side of my car? right now im thinking of getting these for the Back and these for the Front

08-09-2016, 12:54 PM	#8 (permalink)
clkio Enthusiast Member Join Date: May 2014 Location: Cambridge ON Posts: 265 Drives: 09 370z M6 Rep Power: 12	325 on 10.5 rim? I wouldn't go any lower than 11" wide and that's still not wide enough for 325. 12" width recommended Sent from my Nexus 6P using Tapatalk

08-10-2016, 01:32 PM	#9 (permalink)
ChaseZ A True Z Fanatic Join Date: May 2016 Location: Calgary Posts: 3,799 Drives: 16 370z Rep Power: 94684	Looks great. Even at +40 those fronts fill the wheel well nicely. Found some wheels I want but can only get 19x9.5 +22 fronts, and I want them just barely inside the wheel well so looks like I'll have to give them a pass.

08-12-2016, 03:24 PM	#10 (permalink)
Ketchi Base Member Join Date: Mar 2016 Location: Louisiana Posts: 20 Drives: 13 370z 6MT Rep Power: 27	Really want Rohana RC10s but I want 19s and not 20s and I'm trying to figure out if the 19x8.5 +35mm would fit in the front and 19x9.5 +20mm in the rear?

08-13-2016, 08:27 PM	#13 (permalink)
teggy Base Member Join Date: Mar 2012 Location: canada Posts: 126 Drives: 06 350z track Rep Power: 14	New too the Z platform and looking for wheels for my nismo Z what would i have too do too make a 20x11 +10 Fit in the rear wanted too run a 285/20/30 for a tire in rear with Bc coils, im lowered so there is maybe a finger of wheel gap.

08-14-2016, 08:37 PM	#14 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,270 Drives: 15 370Z Nismo 6MT Rep Power: 214101	the answer is always roll + camber