ECUTek BT Dongle and Key Fob Range

redondoaveb · 04-22-2020, 04:32 PM

Quote:

Originally Posted by ByThaBay

Ecutek does care, and a fix is in the works.

Thanks Eugene. I hope it's soon. They've known about this issue for a while now.

Lvcky69 · 05-09-2021, 06:36 PM

Quote:

Originally Posted by redondoaveb

Thanks Eugene. I hope it's soon. They've known about this issue for a while now.

3 years later and still nothing

redondoaveb · 05-09-2021, 06:42 PM

Yep, it's frustrating. Should be an easy fix too.

ByThaBay · 05-09-2021, 06:50 PM

Quote:

Originally Posted by redondoaveb

Yep, it's frustrating. Should be an easy fix too.

Frank (motorvate diy) and I have a fix coming that you’ll be able to purchase shortly!

redondoaveb · 05-09-2021, 07:51 PM

Quote:

Originally Posted by ByThaBay

Frank (motorvate diy) and I have a fix coming that you’ll be able to purchase shortly!

Looking forward to that.

It's unfortunate that Ecutek doesn't acknowledge the issue and do a free fix though.

BossJ · 06-05-2021, 07:36 PM

Wow. I’ve been stumped for so long and bam. This is my issue.

How’s the fix coming?

So for now, I’ll just unplug and plug back in.

DrBacon · 06-05-2021, 08:22 PM

Quote:

Originally Posted by redondoaveb

Looking forward to that.

It's unfortunate that Ecutek doesn't acknowledge the issue and do a free fix though.

I suspect it's not an ecutek specific issue but rather the car its self. I've had the exact same problem with a regular bluetooth obd2 connector that I use for reading codes.

redondoaveb · 06-05-2021, 08:30 PM

Quote:

Originally Posted by DrBacon

I suspect it's not an ecutek specific issue but rather the car its self. I've had the exact same problem with a regular bluetooth obd2 connector that I use for reading codes.

Well, if Eugene and Frank from Motorvate are coming up with a fix, you'd think ecutek could/would do the same so those of us that use their dongle could keep it plugged in full time as it is intended to be used.

Spooler · 06-05-2021, 09:11 PM

It's due to RF interference. The only way to fix it is to change frequencies. The problem is bluetooth has a set of freqs assigned. Our car's fob's have a set of freqs. May not be able to get around the issue. It may be a 3rd, 5th or 7th harmonic issue.

BossJ · 06-06-2021, 02:58 PM

Quote:

Originally Posted by Spooler

It's due to RF interference. The only way to fix it is to change frequencies. The problem is bluetooth has a set of freqs assigned. Our car's fob's have a set of freqs. May not be able to get around the issue. It may be a 3rd, 5th or 7th harmonic issue.

When the car is off, shouldn't the dongle be able to be turned off?

So here's my thought process...

https://www.reddit.com/r/CarHacking/...wer_shuts_off/

MotorvateDIY · 06-21-2021, 06:48 PM

Quote:

Originally Posted by ByThaBay

Frank (motorvate diy) and I have a fix coming that you’ll be able to purchase shortly!

Quick update:

The assembly, bench testing and testing on my G37 are done and everything is worked perfect!!

The cables have been shipped to Eugene for him to test and approve....or test and I re-work them

There are 3 different types:
(1) ~12" "relocate"
(2) ~1" Slim "plug in place"
(3) ~13" "relocate" with pass through. Allows

These special cables will only power the EcuTek (or any OBD scanner) when the engine is running.

redondoaveb · 06-21-2021, 07:29 PM

Quote:

Originally Posted by MotorvateDIY

Quick update:

The assembly, bench testing and testing on my G37 are done and everything is worked perfect!!

The cables have been shipped to Eugene for him to test and approve....or test and I re-work them

There are 3 different types:
(1) ~12" "relocate"
(2) ~1" Slim "plug in place"
(3) ~13" "relocate" with pass through. Allows

These special cables will only power the EcuTek (or any OBD scanner) when the engine is running.

Will these be sold through yourself or Eugene? What are you looking for approximate cost on the 1" plug in place?

BossJ · 06-22-2021, 02:01 PM

Quote:

Originally Posted by MotorvateDIY

Quick update:

The assembly, bench testing and testing on my G37 are done and everything is worked perfect!!

The cables have been shipped to Eugene for him to test and approve....or test and I re-work them

There are 3 different types:
(1) ~12" "relocate"
(2) ~1" Slim "plug in place"
(3) ~13" "relocate" with pass through. Allows

These special cables will only power the EcuTek (or any OBD scanner) when the engine is running.

Give me give me.

ByThaBay · 06-23-2021, 01:49 AM

The pass through will be ideal, this way the vehicle can be plugged into the say the ecutek BT unit or ecutek cable and at the same time you can have another device plugged in like a dyno or dealer scan tool - makes for some very good logging / diagnosis opportunities.

Another benefit is for those running obd2 powered trackers for insurance, this can allow you to power both at the same time and have them both be on the same network.

redondoaveb · 06-23-2021, 09:35 AM

Quote:

Originally Posted by ByThaBay

The pass through will be ideal, this way the vehicle can be plugged into the say the ecutek BT unit or ecutek cable and at the same time you can have another device plugged in like a dyno or dealer scan tool - makes for some very good logging / diagnosis opportunities.

Another benefit is for those running obd2 powered trackers for insurance, this can allow you to power both at the same time and have them both be on the same network.

I'll just need one device plugged in at a time. The plug in place will work well for me

05-09-2021, 06:42 PM	#33 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,297 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	Yep, it's frustrating. Should be an easy fix too. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

06-05-2021, 07:36 PM	#36 (permalink)
BossJ Base Member Join Date: Oct 2015 Location: Florida Posts: 116 Drives: 16 370z Nismo 6MT Rep Power: 9	Wow. I’ve been stumped for so long and bam. This is my issue. How’s the fix coming? So for now, I’ll just unplug and plug back in. __________________ 2016 Pearl White 370Z Nismo (6ma) \|\| Z1 CAI \|\| Greddy GT X \|\| FI Resonated Test Pipes \|\| Ported Manifolds \|\| Fuel Pump: aem50-1200 \|\| 1050cc Fuel Injectors \|\| E85 \|\| RJM Performance Clutch \|\| ECUTECH - SpecialtyZ (Seb)

06-05-2021, 09:11 PM	#39 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	It's due to RF interference. The only way to fix it is to change frequencies. The problem is bluetooth has a set of freqs assigned. Our car's fob's have a set of freqs. May not be able to get around the issue. It may be a 3rd, 5th or 7th harmonic issue. Ghostvette likes this. Last edited by Spooler; 06-05-2021 at 09:14 PM.

06-23-2021, 01:49 AM	#44 (permalink)
ByThaBay Base Member Join Date: Aug 2011 Location: Bay Area, CA Posts: 237 Drives: 2015 370z Rep Power: 6724	The pass through will be ideal, this way the vehicle can be plugged into the say the ecutek BT unit or ecutek cable and at the same time you can have another device plugged in like a dyno or dealer scan tool - makes for some very good logging / diagnosis opportunities. Another benefit is for those running obd2 powered trackers for insurance, this can allow you to power both at the same time and have them both be on the same network. redondoaveb likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] WTB Ecutek cable and deskey/dongle	boostedDSM	Parts for sale (Private Classifieds)	0	05-08-2018 04:32 PM
Ecutek BT Dongle & App	dedoom	Tuning	1	03-11-2018 07:56 AM
[FOR SALE] EcuTek Bluetooth Dongle	warpeacelove	Parts for sale (Private Classifieds)	2	02-18-2018 11:36 AM
[FOR SALE] Ecutek cable and dongle $250 OBO	AZg37	Parts for sale (Private Classifieds)	3	11-30-2017 04:36 PM
[FOR SALE] Ecutek Cable with Dongle	Raiden	Parts for sale (Private Classifieds)	14	01-31-2017 09:03 AM