WARNING with new UpRev update, you loose your tune!

Juan@Fontana · 03-09-2017, 03:42 PM

Quote:

Originally Posted by flashgordon

Ok, you are saying that the conversion is a simple work, very simple....

Simple at point that Uprev reply that:
"There is no other way around it you must re tune if you want the other 4 maps to have different timing tables."

...and my tuner is milking me...

I don't know, but I have a little doubt about it...

Why Uprev does not promote a conversion service? Even for just 50$??

If you'd like to call me I'll be happy to give you a more in depth explanation over the phone.

EP370z · 03-08-2017, 10:10 AM

Time to upgrade to ecutek

flashgordon · 03-08-2017, 12:20 PM

I am not criticizing the technical improvement of ROM Editor.

At begin I was very happy to know that Uprev finally starts to use degrees instead milliseconds in TA maps (like Ecutek)

I am in complete disagreement to the marketing strategy !!

The upgrade is a good features IF IT DOES NOT DESTROY your work (..and money..)

So, if automatic update proposes an upgrade, it's mandatory that old maps are fully compatible!

In another way, is it not technically possible?
Well Uprev must release the ROMEditor v2.0 and specify that IT IS NOT COMPATIBLE !

My tuner says me that dyno it's necessary.... ....it is not safe to adjust TA using the sentiment....

Jhill · 03-08-2017, 03:01 PM

Dang that's kinda shitty. They should warn before updating that you will lose all previous work. I guess it isn't totally uncommon for some updates to no longer be compatible, my friend uses hondata and I guess there is a similar thing with his too so he didn't update as he didn't want to lose all his work but would also like to have latest tech. Good to know for new users that it looks like uprev will be competing again (competition is always good for the consumer) just sucks for previous users.

SouthArk370Z · 03-08-2017, 07:06 PM

It should be fairly easy to set up a spreadsheet to convert advance from milliseconds to degrees. Convert RPM to mS/degCrankRotation (off the top of my head: RPM / 60000 mSec/min / 360 deg/revolution). Multipy result by your table value (ms) to get degAdvance.

zguynate · 03-09-2017, 07:24 PM

Jon at Z1 was able to do this without me having to be retuned. So it can be done.

Sent from my iPhone using Tapatalk

RadioFlyer · 06-26-2017, 09:49 PM

Bumping this because I am extremely frustrated with UpRev right now...

bernbad89: I have been avoiding the UpRev updates because my software has been running smoothly. But the updater ran, and now the software doesn't detect my cable. What can I do to get it to work? Right now, my car is dead and blocking in all the other cars in the driveway. I need to move it! Please help.

flashgordon · 08-12-2017, 04:22 AM

Good news!

I just download the last one update (I don't download it every week....)

I've seen that your old tune return accessibile!

Not operative, but accessible to read the cells and copy to the main map!

Unfortunately, the utility to export the ROM to copy all tunes to a new one was removed.

Note: in this version a new firmware is installed on the cable.

flashgordon · 08-15-2017, 08:45 AM

Quote:

Originally Posted by flashgordon

Good news!

......Unfortunately, the utility to export the ROM to copy all tunes to a new one was removed.....

The tool is on the main screen called "Tune Transfer"

Maduro · 08-23-2017, 12:30 AM

Question: I just had a Transmissions cooler installed on my 2013, Automatic, Uprev tuned Z, My Z felt very bit of the 300 whp and 275 torque that it was dyno-ed at when first tuned. Now all the gears are flat 1 though 5 -- My question, can they some how may have deleted my tune ??????

03-08-2017, 10:10 AM	#2 (permalink)
EP370z Base Member Join Date: Sep 2016 Location: East Peoria, IL Posts: 173 Drives: 2014 370z Nismo #158 Rep Power: 10	Time to upgrade to ecutek 2011 Nismo#91, wideglideleon, ChaseZ and 2 others like this.

03-08-2017, 12:20 PM	#3 (permalink)
flashgordon Premium Member Join Date: Sep 2009 Location: Italy Posts: 146 Drives: 370z Rep Power: 17	I am not criticizing the technical improvement of ROM Editor. At begin I was very happy to know that Uprev finally starts to use degrees instead milliseconds in TA maps (like Ecutek) I am in complete disagreement to the marketing strategy !! The upgrade is a good features IF IT DOES NOT DESTROY your work (..and money..) So, if automatic update proposes an upgrade, it's mandatory that old maps are fully compatible! In another way, is it not technically possible? Well Uprev must release the ROMEditor v2.0 and specify that IT IS NOT COMPATIBLE ! My tuner says me that dyno it's necessary.... ....it is not safe to adjust TA using the sentiment.... carlitos_370z likes this. __________________ HFC Berk - CAI Stillen GEN3 - Catback Nismo - ECU reflash with UpRev - Clutch South Bend Stage II daily with ZSpeed HD CSC - Setrab Oil Cooler Kit with Mishimoto Thermostatic Plate Gold - PJMu Brake Pads - Oil Pressure Gauge GlowShift - TPMs Hella TC400 - Steering Lock disable switch by me - OBD Link MX with Asus Nexus & Torque App

03-08-2017, 07:06 PM	#5 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324199	It should be fairly easy to set up a spreadsheet to convert advance from milliseconds to degrees. Convert RPM to mS/degCrankRotation (off the top of my head: RPM / 60000 mSec/min / 360 deg/revolution). Multipy result by your table value (ms) to get degAdvance. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

03-09-2017, 07:24 PM	#6 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,054 Drives: 09 370z Rep Power: 75	Jon at Z1 was able to do this without me having to be retuned. So it can be done. Sent from my iPhone using Tapatalk DarkJak, Juan@Fontana, Memphis370Z and 1 others like this. __________________ 2009 370z touring w/sports package

08-12-2017, 04:22 AM	#8 (permalink)
flashgordon Premium Member Join Date: Sep 2009 Location: Italy Posts: 146 Drives: 370z Rep Power: 17	Good news! I just download the last one update (I don't download it every week....) I've seen that your old tune return accessibile! Not operative, but accessible to read the cells and copy to the main map! Unfortunately, the utility to export the ROM to copy all tunes to a new one was removed. Note: in this version a new firmware is installed on the cable. __________________ HFC Berk - CAI Stillen GEN3 - Catback Nismo - ECU reflash with UpRev - Clutch South Bend Stage II daily with ZSpeed HD CSC - Setrab Oil Cooler Kit with Mishimoto Thermostatic Plate Gold - PJMu Brake Pads - Oil Pressure Gauge GlowShift - TPMs Hella TC400 - Steering Lock disable switch by me - OBD Link MX with Asus Nexus & Torque App

03-08-2017, 03:01 PM	#4 (permalink)
Jhill Track Member Join Date: Mar 2016 Location: San jose Posts: 855 Drives: 2013 370z sport Rep Power: 3386	Dang that's kinda shitty. They should warn before updating that you will lose all previous work. I guess it isn't totally uncommon for some updates to no longer be compatible, my friend uses hondata and I guess there is a similar thing with his too so he didn't update as he didn't want to lose all his work but would also like to have latest tech. Good to know for new users that it looks like uprev will be competing again (competition is always good for the consumer) just sucks for previous users.

06-26-2017, 09:49 PM	#7 (permalink)
RadioFlyer Base Member Join Date: Aug 2014 Location: Los Angeles, CA. Posts: 193 Drives: 08 G37S S/C Rep Power: 41	Bumping this because I am extremely frustrated with UpRev right now... bernbad89: I have been avoiding the UpRev updates because my software has been running smoothly. But the updater ran, and now the software doesn't detect my cable. What can I do to get it to work? Right now, my car is dead and blocking in all the other cars in the driveway. I need to move it! Please help.

08-23-2017, 12:30 AM	#10 (permalink)
Maduro Base Member Join Date: Mar 2012 Location: New York Posts: 94 Drives: Nissan 2013 370z Rep Power: 15	Question: I just had a Transmissions cooler installed on my 2013, Automatic, Uprev tuned Z, My Z felt very bit of the 300 whp and 275 torque that it was dyno-ed at when first tuned. Now all the gears are flat 1 though 5 -- My question, can they some how may have deleted my tune ??????

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New ECUTEK tune (Switched from my Uprev dyno tune) by SpecialtyZ	edconline	Tuning	40	03-29-2017 06:00 PM
UPREV Update	ihiryu	Tuning	9	03-18-2017 07:30 AM
UpRev Update ??	Wonka2581	Tuning	33	06-27-2016 11:06 AM
Uprev tune and update!! San Diego-Los Angeles	FairladyZ40th	Engine & Drivetrain	0	03-04-2016 07:31 PM
Dealership transmission and ECU software update? Affect on UpRev tune?	AlphaSnacks	Tuning	9	03-03-2015 10:40 PM