|
Please... If you can open up a DE, you can open up a VHR. In this case if the high flow cats and crappy stillen headers were replaced with FI
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
07-29-2015, 10:10 AM
|
#18 (permalink) |
|
A True Z Fanatic
Join Date: Dec 2009
Location: SATX
Posts: 3,296
Drives: Z
Rep Power: 22  |
Please... If you can open up a DE, you can open up a VHR. In this case if the high flow cats and crappy stillen headers were replaced with FI LTH plus a retune there would absoluty be gains. Nothing insane, but about 8-10rwhp is very feasible. This motor is not tapped out from the factory, but what are you expecting here? Cam gains on a pushrod?? No... Motordyne is also working on a lth... You dont think gains will be made there... A couple years ago 315-320 was the norm this motor made FB....Fast forward, im seeing 325-330. This motor imho will be close to its limits na around 340-350 with its heads and considering they dyno stock around 280,... Even being at 330rwhp is a 50rwhp gain. Again. Far from tapped out
__________________
09 GT-R 12' 370Z 7AT HANDED DOWN 12'+13' 5.0 SOLD Last edited by GZ3; 07-29-2015 at 10:12 AM. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Ecutek and PTuning | avery370z | MAZOC | 4 | 01-28-2019 02:13 PM |
| Stock 2015 370Z Tuned on ECUTek | VitViper | Tuning | 14 | 08-24-2015 02:20 PM |
| First 2016 370Z Tuned with EcuTek ! | visconti | Tuning | 1 | 07-18-2015 10:42 PM |
| Just got tuned with ecutek | reldas | Tuning | 19 | 02-12-2014 08:11 PM |
| PTUNING 370z/G37 Stillen Headers Now Available! | Ken@PTuning | Exhaust/Intake | 1 | 08-09-2013 09:33 AM |
33Likes
Threaded Mode
