Square Setup???

Mike · 11-26-2013, 07:11 PM

Quote:

Originally Posted by Masterbeatty

Thats the thing i dont want to run spacers because of 1) vibrations, 2) realiability on the track and/or parking lot. I have heard horror stories about spacers.

I've been running spacers for 4 plus years and over 17000 track miles. Just get quality H&R hubcentric ones and its no issue. Especially if you replace the studs with ARP extended ones.

///MSH · 11-26-2013, 07:42 PM

I run the Enkei PF01's and A06's
F: 9.5" w/295x18 @-3 deg
R: 10.5" w/315x18 @-2.5 deg

My car has been lowered to where I have about 1" between top of tire and lowest point on fender....no issues with anything.

Thinking to go 315 square?

11-26-2013, 07:42 PM	#2 (permalink)
///MSH Base Member Join Date: Jul 2011 Location: Owasso, OK Posts: 86 Drives: '11 370Z Nismo Rep Power: 16	I run the Enkei PF01's and A06's F: 9.5" w/295x18 @-3 deg R: 10.5" w/315x18 @-2.5 deg My car has been lowered to where I have about 1" between top of tire and lowest point on fender....no issues with anything. Thinking to go 315 square? __________________ 2011 Nismo with...Stillen Gen3 CAI, FI LTH's, Stillen CBE with Springfielddyno rear section. Stillen under drive crank pulley, UpRev, and LW flywheel. Penske 8300DA Valved by ANZE, SPR FCA's, Stillen F/R adj. sway bars, Enkei PF01's, and Hoosier A6's

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
19 inch square setup	lhinojos	Wheels & Tires	11	03-24-2015 11:49 AM
[FOR SALE] Vossen CV3 Square Setup	NOFATCHX	Parts for sale (Private Classifieds)	32	03-16-2015 08:21 PM
Thoughts on a square 275 setup on the stock Rays	PharmDZ	Wheels & Tires	19	08-31-2013 05:05 PM
Running a square 10.5 +30 setup?	Kayzee	Wheels & Tires	13	04-14-2013 11:29 PM
Staggered or square setup?	sojirovskensi	Nissan 370Z General Discussions	34	07-30-2012 04:28 AM