Texas World Speedway

Sh0velMan

The Mocal units (supposedly) flow 5% as a baseline and then around 180 begin to open up to something close to 100%.

The reason for the 5% always going out is so that your coolers stay purged of air and doesn't have oil sit in there for long periods of time. The downside to that is, if the thermal load isn't particularly high at a given time, the cooler can cool that 5% of bypass down significantly which will lower overall system temp.

If you weren't sitting at ~180-190 on the track, IMO there is something wrong.

As far as testing, the way I have always seen to test these things is to boil them in water. Use a meat thermometer to keep track of the water temp as it comes up and around 180 you should see the thermostat begin to open up.

If you take the thing off and can see that it isn't completely closed (or almost completely closed) then I'd say you've got a stuck plate for sure. You can find a good quality thermostatic plate for our cars cheap on the net (well under $100) so if it were me, I might just replace it and test for effect, if you don't fancy the idea of boiling a thermostatic plate (my wife would have a fit).

__________________
Buy My Car! | Build Thread