Harness Bar Availability

sig11 · 05-28-2012, 11:32 AM

Hard to see in pictures but there are two bolts about 8" long that replace stock bolts under the back plastic.

gtkiller · 05-29-2012, 01:54 PM

I went to see WWJD's harness bar in person very nice build quality. I'll be getting one myself when I get seat installed.

theDreamer · 05-29-2012, 02:00 PM

Glad to see more options coming to market for this.

sixpax · 05-29-2012, 07:17 PM

Quote:

Originally Posted by WWJD

No, that's not the stock bar. Stock Bar wont hold. That's why we made it in steel and 3" piping. The same material when we make roll cages. Rock solid.
Just look at the pictures carefully, you should br able to find out the difference

Can you PM me what it would cost to get one of those ? Not sure if you are making more from reading your journal.

vjarnot · 05-29-2012, 08:19 PM

Robispec made one for their 370, mayhaps they can make you one as well. http://tinyurl.com/746t9q5

sixpax · 05-29-2012, 08:29 PM

Quote:

Originally Posted by vjarnot

Robispec made one for their 370, mayhaps they can make you one as well. Robispec?s Street Class Time Attack Nissan 370Z, Simple is Better?

damn that looks fairly cool. thanks for sharing !

gomer_110 · 05-29-2012, 09:07 PM

Quote:

Originally Posted by vjarnot

Robispec made one for their 370, mayhaps they can make you one as well. Robispec?s Street Class Time Attack Nissan 370Z, Simple is Better?

That actually looks fairly easy to replicate. Putting it simply, it looks like it's just a matter of fabricating the 2 mounting plates, cutting a pipe that's the right diameter and wall thickness, and then getting it welded together. I might take a look this weekend just to appease the engineer in me.

sixpax · 05-29-2012, 09:10 PM

...it does not look like Robispec is very active these days.

JB1 · 05-29-2012, 09:55 PM

Quote:

Originally Posted by WWJD

Ricky Kwan's second 370Z build
I make one for my Time Attack Z. Not sure if it can be used in your class. Check out my journal.

Looks good, but I've seen some people comment that the position of that bar is too low relative to the seats. The bar should be higher so the harness is not angled down behind the seats. Anyone knows what's right? If the angle of the harness doesnt matter, this bar is the way to go!

vjarnot · 05-29-2012, 10:31 PM

Quote:

Originally Posted by JB1

Looks good, but I've seen some people comment that the position of that bar is too low relative to the seats. The bar should be higher so the harness is not angled down behind the seats. Anyone knows what's right? If the angle of the harness doesnt matter, this bar is the way to go!

I believe Schroth states anywhere from horizontal to 20 degrees down from horizontal is within their specs. I'm sure all the harness manufacturers publish specs. Anyway, it depends on the person and seat as well...

WWJD · 05-29-2012, 11:14 PM

Quote:

Originally Posted by sixpax

Can you PM me what it would cost to get one of those ? Not sure if you are making more from reading your journal.

I have made 5 of them. I don't know the market demand for these though. Also, I'm not a vendor here so I don't think I can sell. That's why i didn't say or advertise in my journal.

Quote:

Originally Posted by JB1

Looks good, but I've seen some people comment that the position of that bar is too low relative to the seats. The bar should be higher so the harness is not angled down behind the seats. Anyone knows what's right? If the angle of the harness doesnt matter, this bar is the way to go!

Yes, my tech has measured this. Due to the angle of the harness, we have actually made 2 revision. It will fit pretty much any racing seat out there. We have tried Recaro Pole Position, SPG, SPG XL. Of course, I can adjust the mounting location to fit more seats. That shouldn't be any problem.
The most important thing is choosing the right harness so it allows you to run certain angle such as Takada.

Quote:

Originally Posted by gtkiller

I went to see WWJD's harness bar in person very nice build quality. I'll be getting one myself when I get seat installed.

Thank you buddy!! You should get a PINK one!! Haha

martin82 · 05-30-2012, 02:09 AM

Pink FTW!!

Robispec · 08-02-2012, 07:24 PM

Quote:

Originally Posted by vjarnot

Robispec made one for their 370, mayhaps they can make you one as well. Robispec?s Street Class Time Attack Nissan 370Z, Simple is Better?

Robispec is making a run of these harness bars.

PM or email info@robispec.com

ENT-Z · 08-02-2012, 08:59 PM

WHere did the thread go about the robispec bar -- I was going to put my name on the list!

djtodd · 08-03-2012, 12:06 AM

+1. It has apparently been nuked. Thread is just gone.

05-29-2012, 02:00 PM	#18 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Glad to see more options coming to market for this. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Price and availability	julianpayne	Z1 Motorsports	1	09-28-2011 11:27 AM
Tampa area weekend availability	ddvette9	South East Region	0	09-02-2011 04:32 PM
Nismo Cold Air Intake availability	Dpeters	Intake/Exhaust	3	10-11-2010 11:08 AM
air filter availability	cptspeed	DIY Section (Do-It-Yourself)	4	07-20-2010 09:34 PM
2011 370Z Ordering Availability	Afterburner	Nissan 370Z Pricing / Ordering Discussions	3	05-23-2010 01:50 PM

05-28-2012, 11:32 AM	#16 (permalink)
sig11 A True Z Fanatic Join Date: Jun 2009 Location: Detroit Posts: 1,294 Drives: 09 370Z Red Sport-MT Rep Power: 17	Hard to see in pictures but there are two bolts about 8" long that replace stock bolts under the back plastic.

05-29-2012, 01:54 PM	#17 (permalink)
gtkiller Enthusiast Member Join Date: Jul 2010 Location: SoCal Posts: 474 Drives: 370Z Rep Power: 3369	I went to see WWJD's harness bar in person very nice build quality. I'll be getting one myself when I get seat installed.

05-29-2012, 08:19 PM	#20 (permalink)
vjarnot Base Member Join Date: Apr 2012 Location: Mathews, AL Posts: 68 Drives: 2012 370Z Base SP M6 Rep Power: 13	Robispec made one for their 370, mayhaps they can make you one as well. http://tinyurl.com/746t9q5

05-30-2012, 02:09 AM	#27 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	Pink FTW!!

08-02-2012, 08:59 PM	#29 (permalink)
ENT-Z Enthusiast Member Join Date: Feb 2009 Location: St. Louis, MO Posts: 460 Drives: 09 MB 6MT 370Z Rep Power: 16	WHere did the thread go about the robispec bar -- I was going to put my name on the list!

08-03-2012, 12:06 AM	#30 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3397	+1. It has apparently been nuked. Thread is just gone.