tested ms confirmed - "stop lamp" fuse pulled = stand still burnouts allowed

370Zsteve · 08-20-2010, 06:05 AM

Quote:

Originally Posted by Triple's

You have been Reped

x2

Jordo! · 08-22-2010, 12:56 AM

Just wondering, but is there a simple way to bypass this and get working brake lights while fooling the ECU? Seems to me that shouldn't be all that hard to wire up, and then you have the best of both worlds.

WarmAndSCSI · 08-22-2010, 01:08 AM

Quote:

Originally Posted by Jordo!

Just wondering, but is there a simple way to bypass this and get working brake lights while fooling the ECU? Seems to me that shouldn't be all that hard to wire up, and then you have the best of both worlds.

It may be trickier than one would think because of the CAN bus...

G Fo12ce · 08-22-2010, 02:36 AM

or CAN't BUS in this case?

See what I did there...

Jordo! · 08-22-2010, 10:46 PM

Quote:

Originally Posted by WarmAndSCSI

It may be trickier than one would think because of the CAN bus...

Really? You can't just run a wire from the brake pedal to the lights and bypass the OEM wiring entirely?

WarmAndSCSI · 08-22-2010, 10:59 PM

Quote:

Originally Posted by Jordo!

Really? You can't just run a wire from the brake pedal to the lights and bypass the OEM wiring entirely?

I'm pretty sure the CAN bus will freak out. I'm not sure how much of the system is controlled via the bus, but I'm sure it will cause some issues.

Cjanik · 08-23-2010, 07:54 AM

well thats easy, if the fuse is only for a burnout... get a fuse, blow it, solder two leads to each side of the fuse, insert fuse in brake light fuse slot, run the wires to a button w/ (install a good fuse on the "hot" wire going to the button).

flip the button, brake lights are cut, burnout done, flip button back, brake lights back on.

Trips · 08-23-2010, 07:58 AM

Quote:

Originally Posted by Cjanik

well thats easy, if the fuse is only for a burnout... get a fuse, blow it, solder two leads to each side of the fuse, insert fuse in brake light fuse slot, run the wires to a button w/ (install a good fuse on the "hot" wire going to the button).

flip the button, brake lights are cut, burnout done, flip button back, brake lights back on.

Good Suggestion

a mega rep for that

Jordo! · 08-23-2010, 12:33 PM

Quote:

Originally Posted by Triple's

Good Suggestion

a mega rep for that

That is a good idea... someone needs to do this with a brief write up.

350z_2nr · 08-23-2010, 01:35 PM

Quote:

Originally Posted by chuckd05

I thought it was your abs fuse that needed to be pulled but it is indeed your STOP LAMP fuse in our fuse box by drivers side foot panel that needs to be pulled. It's a 10 amp fuse . No dash lights came on until after I did the burnout...

Restarted the car and all lights went back to normal.

When the Wifey gets home I am gonna see if it does eliminate your brake lights ...

I wish I knew this earlier !

Thanks to whomever suggested this In one of the 12.9 threads !

you're welcome, I knew it was this way on my 350, so I was sure it would work on the 370. I actually have it on a toggle switch in my 350, it makes it much easier.

Jordo! · 08-23-2010, 07:25 PM

Quote:

Originally Posted by 350z_2nr

you're welcome, I knew it was this way on my 350, so I was sure it would work on the 370. I actually have it on a toggle switch in my 350, it makes it much easier.

Could you make a brief write up for those of us not so handy with a soldering gun?

leighspped · 11-11-2012, 09:49 PM

Quote:

Originally Posted by Jordo!

Could you make a brief write up for those of us not so handy with a soldering gun?

or link to one?

Z eliminator · 11-12-2012, 06:46 AM

I just pull the fuse ..works great on the 7 AT

Jordo! · 11-12-2012, 09:38 AM

If someone industrious on here wants to build an easy plug and play way to do this, complete with a switch, my cash is standing by

Kingbaby · 11-12-2012, 10:09 AM

The fuse does the job...

<------has a switch but not on the brake fuse, likes brake lights

08-22-2010, 12:56 AM	#17 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 417	Just wondering, but is there a simple way to bypass this and get working brake lights while fooling the ECU? Seems to me that shouldn't be all that hard to wire up, and then you have the best of both worlds. __________________ Enjoy it. Destroy it.

08-22-2010, 02:36 AM	#19 (permalink)
G Fo12ce Premium Member Join Date: Nov 2009 Location: Socal Posts: 996 Drives: Sold! Rep Power: 51	or CAN't BUS in this case? See what I did there... __________________ Nismo Suspension: New Owners Check Here!

08-23-2010, 07:54 AM	#22 (permalink)
Cjanik Track Member Join Date: May 2009 Location: Las Vegas Posts: 578 Drives: N/A Rep Power: 16	well thats easy, if the fuse is only for a burnout... get a fuse, blow it, solder two leads to each side of the fuse, insert fuse in brake light fuse slot, run the wires to a button w/ (install a good fuse on the "hot" wire going to the button). flip the button, brake lights are cut, burnout done, flip button back, brake lights back on. Mysilverz likes this.

11-12-2012, 09:38 AM	#29 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 417	If someone industrious on here wants to build an easy plug and play way to do this, complete with a switch, my cash is standing by __________________ Enjoy it. Destroy it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Rear Fog-Lamp "Z" light	Caravanshaka	DIY Section (Do-It-Yourself)	20	09-13-2014 05:02 PM
Do It Yourself Fog Lamp (EASY)	lastblueprint	DIY Section (Do-It-Yourself)	84	06-05-2014 02:08 PM
"Warning" Carbon Fiber Z emblems "DO NOT FIT"	NXTAZEE	Exterior & Interior	2	12-20-2009 03:49 AM