Connecting at Sebring

Wigjiggy

Went to Sebring last weekend with NASA. Only lasted first few sessions, then blew up diff. Nismo Pro 2.0 diff ordered from Z1 and on it's way. Probably won't have it back from Z1 and installed in time for Nov at Sebring. Instead, shooting for Daytona in early Nov and Palm Beach in early Dec. Also got Z1 fuel starv kit, which will help on the sweeping right turns. I also blew up my rear axel assembly. Any suggestions on a replacement? I'm naturally aspirated at 400hp, so no need for anything extreme.

Elmo370z

Holy ****. Oem should work perfectly fine at those levels. You have any pictures on how your diff blew or can you describe? I would email Nismo about the diff and what temperature range those clutch plates can tolerate. Dss pro level axles is always a option ( believe that the name), I would try another set of Oem before pulling the trigger on those DSS’s, also I would look into a diff cooler from MaMotorsports, and a billet diff cover from soho motorsports. Will the car be ok running that crazy bank at Daytona without any oil
Issues? I heard it’s highly recommended to have a dry sump you are able to keep steady oil pressure and not suck in air.

FL 4Motion

You are way overthinking it, Daytona and oil starve issues that is. Wifey ran both of our nismo 370s there all the time, it’s our home track, total of six years, three for each car, never an issue, fuel starve on the other hand...that’s a huge issue.

Both cars were n/a with bolt ons, so for fi, perhaps a different issue with oil starve, btw, mike’s full on race car spec 370z never had oil starve there either iirc and he ran the **** outta that car, I believe all he had was a z1 oil pan spacer. Again, full bolt ons and n/a.

Wigjiggy

The Z1 built diff with Nismo Pro should do fine in terms of temps. Comes with their modified diff cover. Yes, I’m going with OEM axels since I’m not boosted. Used ones are super cheap vs over $2k for higher end versions made for drag strip, which I don’t need. I’ve never had oil starve issues, even on turn 17 at Sebring with R compound tires. My shop installed “idiot lights” for me so I stay on top of that. I also upgrade s the gear from 3.69 to 3.9. Hoping to see better corner exit from that.

Elmo370z

That’s awesome

Elmo370z

That diff still gets crazy hot something I would consider upgrading to in the near future. Let me know how you like the 3.9, i feel like the 3.69 are perfect for Sebring. Only turns I gripe about is coming into 7 and 10 where I’m almost hitting the limiter in 4th gear.

Rusty

Mike broke a rear wing there. Never heard him say anything about oil starve.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

FL 4Motion

Towards the end of his time with the z before he went upscale with the gt3, he was thinking ls swap and he was TRYING to blow his motor, purposely didn’t install the cjm baffled oil pan.

Still never had a problem.

Rusty

The only oil pans available at that time was the AM Perf. pan. They was $1,200 then. Only 20 was sold to the public. I got the one that was on Shamu's Z. The CJM pan didn't come along until a few years ago.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

FL 4Motion

I remember something about getting a chance to pick up an oil pan from him at some point, oh well maybe I’m thinking of someone else.

Either way, he still never had oil starve issues and neither have we.

Elmo370z

Jan signup?

Wigjiggy

Will be at Sebring on Dec 15 trying out new Nismo Pro diff.

Elmo370z

Damnit going to miss that date, changing bunch of stuff on the Miata to prevent and failures. I’ll be out there the first Sunday in Jan

GrayGhost

What about PBIR this weekend, anyone? I won’t be running but I can come out and say hi


Sent from my iPhone using Tapatalk

Elmo370z

Sebring first Sunday in January