Wheels / Tires for Track Time

Jmatchley86 · 04-25-2019, 06:06 AM

Quote:

Originally Posted by Brendan

at +15 you're going to have issues. You want to be around +21 to +30 if you want run 10.5 with moderate camber

Well thats just super... lol. Hopefully removing the bumper tab will solve my issue or doing a combination of that and 35 aspect ratio vs 40. I really don't want to spend the money (now) on a set of coil overs or konis to control the dampen rate.

NorthStyle · 04-25-2019, 08:11 AM

You could just buy camber arms

///maestro · 04-25-2019, 08:19 AM

Quote:

Originally Posted by Jmatchley86

Seeing alot of people saying they run a 10.5 in the front with no issues. I just went wider to this size in the front with a +15 offset (10.5 +15) and now i'm rubbing like crazy with a 275/40/18.

Its not in a turn but when I go over any halfway decent sized bump. I think its hitting the tab that holds the bumper in the wheel well. I already rolled the fenders and am only lowered on swift springs. Any advise here?

I ordered a quick release so I can remove the tab and am about to order some 35 aspect ratio tires. But if someone has words of wisdom i'm all ears.

I'm running a 10 wide up front with +18 offset. Fitment is absolutely spot on with -2 camber. What is your camber setup up front?

AlWakRa · 04-25-2019, 09:53 AM

Quote:

Originally Posted by Jmatchley86

Seeing alot of people saying they run a 10.5 in the front with no issues. I just went wider to this size in the front with a +15 offset (10.5 +15) and now i'm rubbing like crazy with a 275/40/18.

Its not in a turn but when I go over any halfway decent sized bump. I think its hitting the tab that holds the bumper in the wheel well. I already rolled the fenders and am only lowered on swift springs. Any advise here?

I ordered a quick release so I can remove the tab and am about to order some 35 aspect ratio tires. But if someone has words of wisdom i'm all ears.

You would need to get more camber in front, on stock height there is no issues, but lowered you will need -3, -2.5 if fender rolled. I am lowered and don't have any issues with -2.7 front camber and around an inch gap between tire and fender.

Hotrodz · 04-25-2019, 01:14 PM

Quote:

Originally Posted by AlWakRa

You would need to get more camber in front, on stock height there is no issues, but lowered you will need -3, -2.5 if fender rolled. I am lowered and don't have any issues with -2.7 front camber and around an inch gap between tire and fender.

With SPL FUCA I am able to get -3.2 and I am lowered an inch. I have no issues running 18x10.5 +30 or +15 and 275 35 tires. I also run a 18x11 +18 with a 315 30 tire and no problems so far.

Sent from my SM-G965U using Tapatalk

AlWakRa · 04-25-2019, 03:02 PM

Now I am on -3.2 with 285/30/18, not a tall tire so no issues, I used it with 275/40/18 and -2.7 without issues, there was a little rub when I turn too hard at track, happened twice only. With 275/35/18 there shouldn't be any problem at all even without any negative camber.

Jmatchley86 · 04-25-2019, 08:21 PM

thanks for all of the info. I'm not sure what my camber is honestly. don't remember where the sheet is but I can get it done this weekend and adjust it to what yall are saying.

cossie1600 · 04-26-2019, 11:41 AM

275 35 18 is definitely fine, 285 35 18 works too

Heck I ran 295 35 19 and that rubbed

Jmatchley86 · 04-28-2019, 06:55 PM

Fixed the issue! The rubbing was on the tab where the bumper was mounted just underneath the head light. I used a quick release (push style vs band) and removed the tab.

Rubbing is completely gone and i didn't need to mess with camber or go to a different aspect ratio on tires. So you can use a +15 10.5 wheel if you want to do quite a few other things.

adamste · 07-11-2019, 06:12 PM

Quote:

Originally Posted by Spooler

I run 19x10's lowered with no issues and 285/35/19 tires on the front. Find another vendor. Their knowledge is lacking.

Which 19x 10 wheels do you have and what is the offset?

obender66 · 07-12-2019, 09:33 AM

Sorry if it was discussed before- did anyone try rear 18x9 wheels in the front?
I use stock 18" with 245/40 and 275/35.

Orestp · 12-07-2021, 11:55 PM

Hi - WHAT WHEELS ARE THOSE?

OptionZero · 12-09-2021, 05:48 PM

Who are you talking to

DeusExMaxima · 12-11-2021, 07:36 PM

Howz about running a square set of 350z Track edition wheels? Under 19 lbs each and cheap to get.

OptionZero · 12-11-2021, 10:35 PM

350z track wheels are 18x8.5 +33

Thats too weak a size

Most track folks here run 18x10.5 or 11, +15 to 20something

04-25-2019, 03:02 PM	#36 (permalink)
AlWakRa Track Member Join Date: Oct 2010 Location: Qatar Posts: 600 Drives: 10 370Z PW 6MT Rep Power: 13450	Now I am on -3.2 with 285/30/18, not a tall tire so no issues, I used it with 275/40/18 and -2.7 without issues, there was a little rub when I turn too hard at track, happened twice only. With 275/35/18 there shouldn't be any problem at all even without any negative camber. Hotrodz likes this. __________________ 2010 370Z Touring Sport Pearl White 6MT Powered by: Fast Intentions - Motordyne - Stillen - OS Giken - CJ Motorsports - Mishimoto - MCA Suspension - SPL - SuperPRO - RJM - Z1 Motorsport - Zspeed - Volk My Humble Journals

04-26-2019, 11:41 AM	#38 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 31	275 35 18 is definitely fine, 285 35 18 works too Heck I ran 295 35 19 and that rubbed Hotrodz likes this.

07-12-2019, 09:33 AM	#41 (permalink)
obender66 Base Member Join Date: Jun 2015 Location: Toronto Posts: 69 Drives: 2016 370Z Base 6M GM Rep Power: 11	Sorry if it was discussed before- did anyone try rear 18x9 wheels in the front? I use stock 18" with 245/40 and 275/35. Chrisc3 likes this. __________________ 2016 370Z Base/Setrab/AEM/Uprev/M7 Japan/Magnaflow/Quaife/Wilwood/300 whp 2003 G35 sedan 6MT(good bye-after 15 years together )

12-07-2021, 11:55 PM	#42 (permalink)
Orestp Base Member Join Date: Jul 2011 Location: Edmonton, Alberta Posts: 43 Drives: 2010 370Z Rep Power: 15	Hi - WHAT WHEELS ARE THOSE? __________________ GTM Twin Supercharger / GTM Large Capacity Oil Pan / GTM Valve Body Upgrade / Setrab 34 row oil cooler <- Deleted, Replaced with Laminova water to oil oil cooler / MotorDyne ART pipes / Cusco RS LSD / Tuned by Specialty Z / 15mm Ichiba spacers front & rear

12-09-2021, 05:48 PM	#43 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,270 Drives: 15 370Z Nismo 6MT Rep Power: 214101	Who are you talking to Memphis370Z likes this. __________________ OptionZero Build Thread

04-25-2019, 08:11 AM	#32 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,308 Drives: 2011 370Z Nismo Rep Power: 24278	You could just buy camber arms

04-25-2019, 08:21 PM	#37 (permalink)
Jmatchley86 Base Member Join Date: Jan 2017 Location: Fort Worth Posts: 159 Drives: 2011 370z 6MT Rep Power: 9	thanks for all of the info. I'm not sure what my camber is honestly. don't remember where the sheet is but I can get it done this weekend and adjust it to what yall are saying.

04-28-2019, 06:55 PM	#39 (permalink)
Jmatchley86 Base Member Join Date: Jan 2017 Location: Fort Worth Posts: 159 Drives: 2011 370z 6MT Rep Power: 9	Fixed the issue! The rubbing was on the tab where the bumper was mounted just underneath the head light. I used a quick release (push style vs band) and removed the tab. Rubbing is completely gone and i didn't need to mess with camber or go to a different aspect ratio on tires. So you can use a +15 10.5 wheel if you want to do quite a few other things.

12-11-2021, 07:36 PM	#44 (permalink)
DeusExMaxima Base Member Join Date: Feb 2015 Location: Southern California Posts: 80 Drives: 2010 red roadster Rep Power: 6721	Howz about running a square set of 350z Track edition wheels? Under 19 lbs each and cheap to get.

12-11-2021, 10:35 PM	#45 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,270 Drives: 15 370Z Nismo 6MT Rep Power: 214101	350z track wheels are 18x8.5 +33 Thats too weak a size Most track folks here run 18x10.5 or 11, +15 to 20something Hotrodz likes this. __________________ OptionZero Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Speedo with Track wheels and tires	PotatoSalad!	Track / Autocross / Drifting / Dragstrip	3	06-30-2018 12:15 AM
Track only wheels/tires set up	Quicksilvers	Wheels & Tires	33	03-07-2018 04:20 AM
MVP Track Time 2016 Midwestern Track Events (Come Drive With Us)	Feffman	Mid Western Region	2	07-15-2016 10:10 AM
Help choosing tires for 19" wheels track & DD	carlitos_370z	Track / Autocross / Drifting / Dragstrip	15	04-24-2015 07:18 AM
2014 MVP Track Time Road Atlanta Track Dates	Feffman	South East Region	1	06-11-2014 05:27 PM