Wheels / Tires for Track Time

adamste · 03-25-2019, 06:58 PM

Quote:

Originally Posted by Hotrodz

You just got to decide what your budget for wheels are and then pick reputable company. I have two sets of 18s...Enkei nt03 10.5 +30 square. I run a 15mm spacer on the rear. My other set are Volk te sl 11 +18 square. Both these setups allow me to rotate tires as I need without having to dismount and mount the tires on a different wheel. My car is a 2010 Nismo and I am lowered on Fortune Auto 500 coilovers. They fit with no rubbing issues.

Sent from my SM-G965U using Tapatalk

Did you modify your front fender for 10.5s? A vendor I contacted said they would not recommend a wheel wider than 9.5 on the stock fender and height.

Spooler · 03-25-2019, 08:15 PM

Quote:

Originally Posted by adamste

Did you modify your front fender for 10.5s? A vendor I contacted said they would not recommend a wheel wider than 9.5 on the stock fender and height.

I run 19x10's lowered with no issues and 285/35/19 tires on the front. Find another vendor. Their knowledge is lacking.

adamste · 07-11-2019, 06:12 PM

Quote:

Originally Posted by Spooler

I run 19x10's lowered with no issues and 285/35/19 tires on the front. Find another vendor. Their knowledge is lacking.

Which 19x 10 wheels do you have and what is the offset?

obender66 · 07-12-2019, 09:33 AM

Sorry if it was discussed before- did anyone try rear 18x9 wheels in the front?
I use stock 18" with 245/40 and 275/35.

RN SHARK · 03-26-2019, 12:54 AM

Quote:

Originally Posted by adamste

Did you modify your front fender for 10.5s? A vendor I contacted said they would not recommend a wheel wider than 9.5 on the stock fender and height.

I run the same wheel/spacer set up as Hotrodz, the nt03 18x10.5 +30 square with the rear spacers. Lowered on Swifts only. No fender modifications needed. Camber is -3.3 front and -2.6 rear.

AlWakRa · 03-26-2019, 05:29 AM

Quote:

Originally Posted by adamste

Did you modify your front fender for 10.5s? A vendor I contacted said they would not recommend a wheel wider than 9.5 on the stock fender and height.

I ran 10.5 +18 on stock suspension with -2.5 camber front and 275/40/18 with no issues, the same I am running now lowered with -2.65 camber, rarely rub. I didn't do fender roll or modified anything. I will go with 285/30/18 (lets say it is 295 or 305 as bfg run wider) now and I am planning on going with -3.5 front camber, and I don't think it will be an issue as I was at that camber when I took my car for the alignment.

///maestro · 04-03-2019, 12:32 PM

Quote:

Originally Posted by AlWakRa

I ran 10.5 +18 on stock suspension with -2.5 camber front and 275/40/18 with no issues, the same I am running now lowered with -2.65 camber, rarely rub. I didn't do fender roll or modified anything. I will go with 285/30/18 (lets say it is 295 or 305 as bfg run wider) now and I am planning on going with -3.5 front camber, and I don't think it will be an issue as I was at that camber when I took my car for the alignment.

got any pics?

I just picked up some 18x10s all around. Going a little beefier with 275/40/18 tires.

AlWakRa · 04-03-2019, 03:06 PM

Quote:

Originally Posted by ///maestro

got any pics?

I just picked up some 18x10s all around. Going a little beefier with 275/40/18 tires.

///maestro · 04-03-2019, 03:59 PM

Quote:

Originally Posted by AlWakRa

thats 18x10.5 with et 18 all around???

AlWakRa · 04-03-2019, 04:07 PM

Quote:

Originally Posted by ///maestro

thats 18x10.5 with et 18 all around???

Yes, with 10mm rear spacers, -2.7 front camber -2.0 rear camber

NLZN · 04-03-2019, 04:58 PM

I have a lot of track and autox on these.
Konig Ultraform, 18x10.5 +25, 20mm spacer in the rear to flush. Currently on 285 re71

///maestro · 04-03-2019, 09:50 PM

Quote:

Originally Posted by AlWakRa

Yes, with 10mm rear spacers, -2.7 front camber -2.0 rear camber

That's absolutely crazy. Here's Thomas' car with those same specs and -3.1 camber.

I was seriously considering buying these wheels but opted not to due to how far they poke. I didn't want to destroy my front fenders. So it's crazy to see your car with these same specs and have them fit way more flush with less camber.

Orestp · 12-07-2021, 11:55 PM

Hi - WHAT WHEELS ARE THOSE?

Hotrodz · 03-26-2019, 11:52 AM

Quote:

Originally Posted by adamste

Did you modify your front fender for 10.5s? A vendor I contacted said they would not recommend a wheel wider than 9.5 on the stock fender and height.

I haven't had to do anything to the fenders everything clears easily. You just need to get the appropriate off sets and you will be good to go.

Sent from my SM-G965U using Tapatalk

07-12-2019, 09:33 AM	#4 (permalink)
obender66 Base Member Join Date: Jun 2015 Location: Toronto Posts: 69 Drives: 2016 370Z Base 6M GM Rep Power: 12	Sorry if it was discussed before- did anyone try rear 18x9 wheels in the front? I use stock 18" with 245/40 and 275/35. Chrisc3 likes this. __________________ 2016 370Z Base/Setrab/AEM/Uprev/M7 Japan/Magnaflow/Quaife/Wilwood/300 whp 2003 G35 sedan 6MT(good bye-after 15 years together )

04-03-2019, 04:58 PM	#11 (permalink)
NLZN Base Member Join Date: Dec 2017 Location: Kentucky Posts: 53 Drives: 09 370z Sport Rep Power: 9	I have a lot of track and autox on these. Konig Ultraform, 18x10.5 +25, 20mm spacer in the rear to flush. Currently on 285 re71 __________________ Intake \| HFC's \| CBE \| Nismo 1.5 \| Suspension Stuff \| CMAK \| Ecutek \| 321 WHP Last edited by NLZN; 04-03-2019 at 05:00 PM.

12-07-2021, 11:55 PM	#13 (permalink)
Orestp Base Member Join Date: Jul 2011 Location: Edmonton, Alberta Posts: 43 Drives: 2010 370Z Rep Power: 16	Hi - WHAT WHEELS ARE THOSE? __________________ GTM Twin Supercharger / GTM Large Capacity Oil Pan / GTM Valve Body Upgrade / Setrab 34 row oil cooler <- Deleted, Replaced with Laminova water to oil oil cooler / MotorDyne ART pipes / Cusco RS LSD / Tuned by Specialty Z / 15mm Ichiba spacers front & rear

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Speedo with Track wheels and tires	PotatoSalad!	Track / Autocross / Drifting / Dragstrip	3	06-30-2018 12:15 AM
Track only wheels/tires set up	Quicksilvers	Wheels & Tires	33	03-07-2018 04:20 AM
MVP Track Time 2016 Midwestern Track Events (Come Drive With Us)	Feffman	Mid Western Region	2	07-15-2016 10:10 AM
Help choosing tires for 19" wheels track & DD	carlitos_370z	Track / Autocross / Drifting / Dragstrip	15	04-24-2015 07:18 AM
2014 MVP Track Time Road Atlanta Track Dates	Feffman	South East Region	1	06-11-2014 05:27 PM