Ride Height, Tire size, Spring Discussion

MinionZ · 07-20-2018, 03:00 PM

Quote:

Originally Posted by SS_Firehawk

You're going to need at least a +30 to a +36 offset to fit up front and fit a full width tire. It's going to rub unless you run some heavy camber.

i'm at -2.8 now. drove around with a 18x10.5 +15 rpf1 for a bit with a 275/35 nt01 and had no issues, but i do agree more offset is needed up front

Hotrodz · 07-20-2018, 03:11 PM

Quote:

Originally Posted by MinionZ

i'm at -2.8 now. drove around with a 18x10.5 +15 rpf1 for a bit with a 275/35 nt01 and had no issues, but i do agree more offset is needed up front

I run the nt03 18x10.5 +30 square and then run a 15 mm spacer in the rear so I can rotate tires freely. I also run TE SL 18x11 +18 square and me camber is -2.8 right now.

austinroberts · 07-25-2018, 01:24 AM

@hotrods
Can you post a photo with your nto3s?

Hotrodz · 07-25-2018, 09:14 AM

Quote:

Originally Posted by austinroberts

@hotrods
Can you post a photo with your nto3s?

As reqsted!

Sent from my SM-G965U using Tapatalk

07-25-2018, 01:24 AM	#3 (permalink)
austinroberts Base Member Join Date: May 2018 Location: Salt Lake City Posts: 29 Drives: 2010 370 Nismo Rep Power: 9	@hotrods Can you post a photo with your nto3s? Hotrodz likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Different ride height same springs and wheel size	scope22	Brakes & Suspension	12	12-11-2015 06:27 AM
Lower Ride Height Resulting from Different Wheel/Tire Combo?	preR35	Wheels & Tires	9	11-20-2013 10:07 AM
BC Coilovers Ride Height	Nanoetch	DIY Section (Do-It-Yourself)	7	04-26-2012 03:54 PM
Tire question about sidewall height in relation to ride height...	chuckd05	Wheels & Tires	2	05-07-2011 04:03 AM
Ride height not even on my new Z	Aaron1	Brakes & Suspension	17	01-15-2011 03:16 PM