Aeromotions wing install

yaoxiao4 · 11-09-2018, 05:39 PM

Quote:

Originally Posted by Hotrodz

Yep, that is why I decided to go the route I did first. The crazy thing is the mounts for the same wing or the 500 on the GTR are much beefier...not sure why they did use the design for the Z.

Sent from my SM-G965U using Tapatalk

especially when the mounts are so close together in the center for the gtc300....

another question is, what effect does it have when the wing shakes much, am I loosing DF or its getting inconsistent airflow?

Hotrodz · 11-09-2018, 06:10 PM

Quote:

Originally Posted by yaoxiao4

especially when the mounts are so close together in the center for the gtc300....

another question is, what effect does it have when the wing shakes much, am I loosing DF or its getting inconsistent airflow?

I don't think there is a significant decrease in downforce as long as it is not to drastic and erratic. I think you would see it more in upsetting the car because of the inconsistent flow.

Sent from my SM-G965U using Tapatalk

Rusty · 11-09-2018, 07:28 PM

Mike used aluminum plate to increase the footprint of the bases. Then had the aluminum painted to match.

Hotrodz · 11-09-2018, 07:30 PM

Quote:

Originally Posted by Rusty

Mike used aluminum plate to increase the footprint of the bases. Then had the aluminum painted to match.

I was going to suggest as well.

Sent from my SM-G965U using Tapatalk

Rusty · 11-09-2018, 07:34 PM

Think Mike sandwiched his with another plate inside.

Hotrodz · 11-09-2018, 07:40 PM

Quote:

Originally Posted by Rusty

Think Mike sandwiched his with another plate inside.

Hmmm, made I will do that if this doesn't suffice. It is pretty stout!

Sent from my SM-G965U using Tapatalk

11-09-2018, 07:28 PM	#3 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,575 Drives: 2011 Nismo GM 6M Rep Power: 2684440	Mike used aluminum plate to increase the footprint of the bases. Then had the aluminum painted to match. Hotrodz likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

11-09-2018, 07:34 PM	#5 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,575 Drives: 2011 Nismo GM 6M Rep Power: 2684440	Think Mike sandwiched his with another plate inside. jwick and Hotrodz like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Evo-r nismo wing install	Deqos	Nissan 370Z General Discussions	7	08-04-2017 04:43 AM
Fly1 Duckbill Wing Install - HELP!!!!	slammedsammy	Nissan 370Z General Discussions	11	02-27-2016 08:42 AM
Aeromotions r2 GT wing???	synolimit	Exterior & Interior	1	11-27-2014 01:29 PM
wing install?	Jimbo370	Exterior & Interior	13	06-19-2014 05:31 PM
Evo-r wing install	tsummitt	Exterior & Interior	12	09-29-2013 01:04 PM