wing install?

Jimbo370 · 06-16-2014, 04:10 PM

I called Nissan to install a sport wing and the labor is $280. Is it almost a 3 hr job? Does that sound fair?

kenchan · 06-16-2014, 04:25 PM

wow... place template, drill a few holes, mounting tape, tighten screws.

maybe one hr?

madmike23 · 06-16-2014, 06:03 PM

Yea, or if you're not sure of yourself or don't have a drill, some random body shop could charge about $100 for the install.

AdamRacer · 06-16-2014, 09:58 PM

I had a local autocrafters do mine and it was about $110 total and they did a great job.

axmea? · 06-17-2014, 02:33 AM

You don't even need a template. All you need is to drill four holes plus tape not all 12 or so.

Jimbo370 · 06-17-2014, 02:45 PM

Update: went to 4 shops.#1 Autocrafters changed names on phillips hwy and the kid was not too confident about all the holes. #2 Prostar said the screws are different and doesn't know what size hole since it is not round(buy hatch w/spoiler. #3 mandarin collision said $200 and he will just bolt the 4 screws,cut off the 8 odd shape snaps and 3m tape it so it will hold but they are too busy now. #4 Honda stealership sub- lets their body work out. Going to try OrangePark on the cheaper side of town. Anybody local know how to work on Nissans?

JWillis72 · 06-17-2014, 02:55 PM

Quote:

Originally Posted by Jimbo370

Update: went to 4 shops.#1 Autocrafters changed names on phillips hwy and the kid was not too confident about all the holes. #2 Prostar said the screws are different and doesn't know what size hole since it is not round(buy hatch w/spoiler. #3 mandarin collision said $200 and he will just bolt the 4 screws,cut off the 8 odd shape snaps and 3m tape it so it will hold but they are too busy now. #4 Honda stealership sub- lets their body work out. Going to try OrangePark on the cheaper side of town. Anybody local know how to work on Nissans?

What part of Florida are you in? I installed my GTC-300 wing thats a much harder job than this and it wasn't a big deal.

Jimbo370 · 06-17-2014, 03:05 PM

I am in Jacksonville about 400 miles north of you. I have been as far as 10 thousand islands down there on the westside,it is very nice.

JWillis72 · 06-17-2014, 03:12 PM

Ok that's a long drive! Do you have any race/performance shops near you, I know mine does wing installs so the spoiler should be no big deal.

JWillis72 · 06-17-2014, 03:14 PM

Quote:

Originally Posted by Jimbo370

I am in Jacksonville about 400 miles north of you. I have been as far as 10 thousand islands down there on the westside,it is very nice.

I love the 10 thousand islands, we spent a lot of time down there with the jetskis a few years age. Unfortunately the jetskis had to go when I traded the truck in on the Z.

Jimbo370 · 06-17-2014, 03:19 PM

Thanks for the race shop idea that thinking out of the box. I was just thinking bodyshops. Side note you could get lost in those islands but there were plenty of bonefish to keep you occupied

dkinghl · 06-18-2014, 03:34 AM

Quote:

Originally Posted by Jimbo370

I called Nissan to install a sport wing and the labor is $280. Is it almost a 3 hr job? Does that sound fair?

most important part is to get the template and carefull allign that template.

My experience said that rusk will destroy everything. be calm, park your car in garage and slowly drill any holes, from small to big

People at all body shop just want to finish their job as soon as possible and get away

Jimbo370 · 06-19-2014, 04:28 PM

Update- A friend from church who has been doing bodywork for yrs is going to take a look at it on Sun. He is going to use some roller at work to take of the 3m sticky stuff and says it should be secured good with just using the 4 bolts and tape. He is going to start drilling small holes first. Keeping the faith.

Malm · 06-19-2014, 05:31 PM

yep line up the wing and use those plastic straps that you push into the screw hole then put the wing where you want it, tape the straps down and pop off the wing. Then you have your template.

Measure 10x drill once.

06-16-2014, 04:10 PM	#1 (permalink)
Jimbo370 Enthusiast Member Join Date: Jan 2014 Location: Florida Posts: 466 Drives: 09 black 370z MT Rep Power: 11	wing install? I called Nissan to install a sport wing and the labor is $280. Is it almost a 3 hr job? Does that sound fair?

06-17-2014, 02:33 AM	#5 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,233 Drives: WELL ZED PW 6MT Rep Power: 53241	You don't even need a template. All you need is to drill four holes plus tape not all 12 or so. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Kognition Wing with custom wing mount with additional set of smaller end plate	gtkiller	Parts for sale (Private Classifieds)	14	06-27-2016 07:27 AM
DIY AERO JACKET III Wing install (short version) for KaienZ34	Junior370z	DIY Section (Do-It-Yourself)	30	04-18-2014 10:17 PM
Evo-r wing install	tsummitt	Exterior & Interior	12	09-29-2013 01:04 PM
Trunk latch issues after EvoR Wing install	Thuegel1	Exterior & Interior	10	07-30-2013 12:33 AM
Seibon CF wing install.. Opinions on paint, please!	Tigger	Exterior & Interior	8	05-04-2013 10:41 PM

06-16-2014, 04:25 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	wow... place template, drill a few holes, mounting tape, tighten screws. maybe one hr?

06-16-2014, 06:03 PM	#3 (permalink)
madmike23 Base Member Join Date: Dec 2013 Location: Brea, CA Posts: 139 Drives: '14 370Z PW Touring Rep Power: 11	Yea, or if you're not sure of yourself or don't have a drill, some random body shop could charge about $100 for the install.

06-16-2014, 09:58 PM	#4 (permalink)
AdamRacer Enthusiast Member Join Date: Jan 2012 Location: North Florida Posts: 316 Drives: '12 MBlue 370z 6sp Rep Power: 13	I had a local autocrafters do mine and it was about $110 total and they did a great job.

06-17-2014, 02:45 PM	#6 (permalink)
Jimbo370 Enthusiast Member Join Date: Jan 2014 Location: Florida Posts: 466 Drives: 09 black 370z MT Rep Power: 11	Update: went to 4 shops.#1 Autocrafters changed names on phillips hwy and the kid was not too confident about all the holes. #2 Prostar said the screws are different and doesn't know what size hole since it is not round(buy hatch w/spoiler. #3 mandarin collision said $200 and he will just bolt the 4 screws,cut off the 8 odd shape snaps and 3m tape it so it will hold but they are too busy now. #4 Honda stealership sub- lets their body work out. Going to try OrangePark on the cheaper side of town. Anybody local know how to work on Nissans?

06-17-2014, 03:05 PM	#8 (permalink)
Jimbo370 Enthusiast Member Join Date: Jan 2014 Location: Florida Posts: 466 Drives: 09 black 370z MT Rep Power: 11	I am in Jacksonville about 400 miles north of you. I have been as far as 10 thousand islands down there on the westside,it is very nice.

06-17-2014, 03:12 PM	#9 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	Ok that's a long drive! Do you have any race/performance shops near you, I know mine does wing installs so the spoiler should be no big deal.

06-17-2014, 03:19 PM	#11 (permalink)
Jimbo370 Enthusiast Member Join Date: Jan 2014 Location: Florida Posts: 466 Drives: 09 black 370z MT Rep Power: 11	Thanks for the race shop idea that thinking out of the box. I was just thinking bodyshops. Side note you could get lost in those islands but there were plenty of bonefish to keep you occupied

06-19-2014, 04:28 PM	#13 (permalink)
Jimbo370 Enthusiast Member Join Date: Jan 2014 Location: Florida Posts: 466 Drives: 09 black 370z MT Rep Power: 11	Update- A friend from church who has been doing bodywork for yrs is going to take a look at it on Sun. He is going to use some roller at work to take of the 3m sticky stuff and says it should be secured good with just using the 4 bolts and tape. He is going to start drilling small holes first. Keeping the faith.

06-19-2014, 05:31 PM	#14 (permalink)
Malm Track Member Join Date: Jan 2014 Location: Palm Bay, Florida Posts: 706 Drives: 11 Nissan 370z bs a7 Rep Power: 12	yep line up the wing and use those plastic straps that you push into the screw hole then put the wing where you want it, tape the straps down and pop off the wing. Then you have your template. Measure 10x drill once.