2015 A/T Nismo Tech Build

SG4247

Dude, you have done a ton of work!

Where does it seem to be off at? 60' times or the whole run?

Was it 3220 lbs - with or without driver?

hustleman222

60' is unchanged, still a 1.9 because I can't stall up. And this is weight without the driver.

__________________
316whp/262tq 12.38 @ 110mph on 3.91 gears
336whp/273tq Didn't push it hard enough.
Turbo Time

hustleman222

Soho stage 2 kit came in and I sent the piping and intercooler off to be powdercoated to match the car a little better. I did upgrade to the CJM fuel return with top hat. The car has been in the shop because in June some askhat backed into the car in a parking lot and put his trailer hitch through the front bumper. I've got some new brake pads in that are meant to be for cold braking. As soon as I get the car back I'll swap the pads, lines and make an adjustment to the e-brake. I ended up getting another rear diff with a vlsd with 3.3 gears. I'm gonna try and hold off on installing the kit to make a couple hits on the new setup. I have also ordered a set of rear drag coilovers from IDS to make sure the car is ready for anything with the suspension.

Attached Images

	1601702696525.jpg (165.9 KB, 7 views)
	1601702700386.jpg (226.2 KB, 11 views)
	1601702698416.jpg (256.2 KB, 7 views)
	1601702702056.jpg (219.3 KB, 10 views)

__________________
316whp/262tq 12.38 @ 110mph on 3.91 gears
336whp/273tq Didn't push it hard enough.
Turbo Time