CJM Road Race Fuel Pump, Production Round 4

phunk · 04-14-2016, 06:48 PM

Quote:

Originally Posted by ban25

Hey Charles, I'm doing my pump install with Rob at Z-Car Garage as part of my build. Not sure how to handle my reservation here...have you guys been in touch?

Rob has mentioned to me that he wanted me to hold a unit for him. That reservation is active. Assuming its yours that he had me reserve, than it is in the works.

Elmo370z · 04-15-2016, 02:09 AM

Quote:

Originally Posted by phunk

Payment confirmed and applied!

I will reach out tomorrow and try and apply some pressure. I am very anxious to get these things shipping out the door! Open invoices make my OCD flare up.

No worries. Rather wait and have a pefect product. It will get to me when it's ready.

derraj06 · 04-15-2016, 10:03 AM

Quote:

Originally Posted by phunk

Payment confirmed and applied!

I will reach out tomorrow and try and apply some pressure. I am very anxious to get these things shipping out the door! Open invoices make my OCD flare up.

It's all good my friend. There's only about 4-6 turns you can actually fuel starve on the dragon anyway. My car is still in shake down mode so I doubt I'll pull a run fast enough that it is a consistent issue. I'm excited to get this in the car along with the oil pan and ATI damper. Hopefully it's a good start to protecting the engine.

phunk · 04-26-2016, 01:25 PM

I stopped by the anodizer today to check in and drop off a handful of small unrelated parts.

Apparently he is extremely backed up, things looked pretty hectic. He is still hoping to finish our parts this week. Keeping fingers crossed.

derraj06 · 04-26-2016, 04:43 PM

Quote:

Originally Posted by phunk

I stopped by the anodizer today to check in and drop off a handful of small unrelated parts.

Apparently he is extremely backed up, things looked pretty hectic. He is still hoping to finish our parts this week. Keeping fingers crossed.

Hopefully he can get them done. I appreciate the update! Zdayz is getting close so maybe I can squeeze this thing in before hand.

Elmo370z · 04-27-2016, 11:28 PM

I second that, I've been reading over the instructions

phunk · 04-30-2016, 11:53 AM

Woooo parts are ready for pickup! I wish I checked my email earlier, they close at 1030am Saturday. But I'll get there first thing Monday.

Elmo370z · 05-03-2016, 12:10 PM

Quote:

Originally Posted by phunk

Woooo parts are ready for pickup! I wish I checked my email earlier, they close at 1030am Saturday. But I'll get there first thing Monday.

When they ship out well you provide taking numbers for those who have anyway paid in full

phunk · 05-03-2016, 12:59 PM

Quote:

Originally Posted by Elmo370z

When they ship out well you provide taking numbers for those who have anyway paid in full

Absolutely. I received the parts back yesterday morning and got them inventoried. Hoping to get the first couple kits shipped out tomorrow!

Elmo370z · 05-03-2016, 01:03 PM

Sweet

BGTV8 · 05-05-2016, 09:40 PM

PM Sent

phunk · 05-06-2016, 08:29 PM

Quote:

Originally Posted by phunk

Absolutely. I received the parts back yesterday morning and got them inventoried. Hoping to get the first couple kits shipped out tomorrow!

I wanted to make a post before the weekend since I know silence is disheartening.

Attached are photos from today. I finished assembly of the first 12 from this batch to be headed out. The only reason they didnt make my UPS shipping cut-off today is because the new pre-fabbed hoses are sort of time consuming to build (they involve a heat gun and special press and a bit of manual labor). These WILL be done tomorrow and they WILL be out the door Monday.

Why am I behind schedule from my post a couple days ago? Tuesday I had to leave at 3pm for a wake and then drive up north 2 hours to the race track for support. The next morning, I will spare you the story-time, but I had to take the first sick-days I have taken in several years. I will be working through the weekend to catch back up.

Elmo370z · 05-07-2016, 10:53 PM

Cheers, cant wait until the products arrive. I think we all understand how busy of a,person you are building a empire. Two thumbs up for all the hard sir

derraj06 · 05-10-2016, 08:50 AM

Just wanted to say thanks for the call concerning my shipping address!

Here's great customer service. I moved from between the time I put a deposit on a system and the time the final payment was sent so there were two shipping addresses. Most places would just pick one at random and ship it. Charles however, took the time in his busy schedule to give me a shout and ask. Five minutes later it was sorted and my pump will be at the correct address soon.

Great shop that I look forward to continuing to do business with! I'll probably end up with a fuel system soon and I know that'll be as awesome as the oil pan and RRP.

street2soul · 05-10-2016, 09:03 AM

hey phunk, I'm on the finish payment section. seems like its charging shipping again?

04-26-2016, 01:25 PM	#49 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,655 Drives: 370 Rep Power: 944523	I stopped by the anodizer today to check in and drop off a handful of small unrelated parts. Apparently he is extremely backed up, things looked pretty hectic. He is still hoping to finish our parts this week. Keeping fingers crossed. derraj06 and EliteXpress like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

04-30-2016, 11:53 AM	#52 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,655 Drives: 370 Rep Power: 944523	Woooo parts are ready for pickup! I wish I checked my email earlier, they close at 1030am Saturday. But I'll get there first thing Monday. Hotrodz likes this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

05-07-2016, 10:53 PM	#58 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Cheers, cant wait until the products arrive. I think we all understand how busy of a,person you are building a empire. Two thumbs up for all the hard sir phunk likes this.

05-10-2016, 08:50 AM	#59 (permalink)
derraj06 Enthusiast Member Join Date: Jun 2013 Location: Huntsville, AL Posts: 406 Drives: MB 370z Rep Power: 11	Just wanted to say thanks for the call concerning my shipping address! Here's great customer service. I moved from between the time I put a deposit on a system and the time the final payment was sent so there were two shipping addresses. Most places would just pick one at random and ship it. Charles however, took the time in his busy schedule to give me a shout and ask. Five minutes later it was sorted and my pump will be at the correct address soon. Great shop that I look forward to continuing to do business with! I'll probably end up with a fuel system soon and I know that'll be as awesome as the oil pan and RRP. phunk likes this. __________________ 2010 Monterey Blue 370Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] CJMotorsports 370z fuel starvation elimination kit, fuel pump brand new	cossie1600	Parts for sale (Private Classifieds)	3	12-10-2015 09:43 PM
phunk's road race fuel pump install	Rusty	Track / Autocross / Drifting / Dragstrip	29	05-26-2015 04:54 PM
CJ Motorsports Road race pump...	clintfocus	Track / Autocross / Drifting / Dragstrip	37	08-10-2014 07:55 PM
[FOR SALE] Walbro 255 Lph Fuel Pump (PUMP ONLY)	Nism0	Parts for sale (Private Classifieds)	8	08-18-2013 03:23 PM
List of Cal. race fuel at the pump	KillerBee370	Southern California Region	7	11-25-2009 05:11 PM

04-27-2016, 11:28 PM	#51 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	I second that, I've been reading over the instructions

05-03-2016, 01:03 PM	#55 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Sweet

05-05-2016, 09:40 PM	#56 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,503 Drives: 09 Nissan 370Z M6 Rep Power: 29907	PM Sent

05-10-2016, 09:03 AM	#60 (permalink)
street2soul Enthusiast Member Join Date: Aug 2010 Location: Texas Posts: 284 Drives: 13 Nismo Rep Power: 3369	hey phunk, I'm on the finish payment section. seems like its charging shipping again?