CJM Fuel Return or any

nschutt338 · 07-21-2017, 06:22 AM

Just seeing if there are any kits laying around no one got around to installing or took off to upgrade. Open to other fuel return systems but prefer cjm. Shoot me a text for faster response. 6 one nine 3 zero two 55 zero eight

nschutt338 · 07-24-2017, 11:52 AM

Purchased new

anyone know how to close thread? or MODS please close

Jayhovah · 07-24-2017, 11:53 AM

mods have to do it unless you are premium.

NissanTracker · 07-25-2017, 09:05 PM

With a fuel return kit, new is the way to go. You made a good choice. Others would agree. There are just some things you don't want to cheap out on. Exhaust stuff.. ok, intake pipes.. fine. Anything forced induction or fuel related is iffy. I'm currently going through this experience with a used Stillen S.C. Just not worth the agony and pain. In the end, you supported one of the vendors!

nschutt338 · 07-26-2017, 08:05 AM

Quote:

Originally Posted by NissanTracker

With a fuel return kit, new is the way to go. You made a good choice. Others would agree. There are just some things you don't want to cheap out on. Exhaust stuff.. ok, intake pipes.. fine. Anything forced induction or fuel related is iffy. I'm currently going through this experience with a used Stillen S.C. Just not worth the agony and pain. In the end, you supported one of the vendors!

I had an issue with my stillen s/c as well from a member where the blower had metal shavings in the oil so it was rebuild (would be second time rebuilt) or buy new so I forked over the extra 2k in which I could've had a brand new kit almost off the savings from the used one. now its for sale with less than 4k miles on it

NissanTracker · 07-26-2017, 09:21 AM

Sounds about right. Member told me there was only 10 K miles. All pullies were SHOT. No way there was 10K miles. I have a thread open for my current issue with the kit. In summary, the charge cooler in the plenum had a pin size hole. Went on the dyno after install and 6.5 PSI of coolant flooded my cylinders when it went into vacuum. I'm not at all a happy camper. I have not run into a blower issue YET... but I'm sure that will come soon too. And yeah... If I threw an extra 1,500, I would have had a brand new kit.

Quote:

Originally Posted by nschutt338

I had an issue with my stillen s/c as well from a member where the blower had metal shavings in the oil so it was rebuild (would be second time rebuilt) or buy new so I forked over the extra 2k in which I could've had a brand new kit almost off the savings from the used one. now its for sale with less than 4k miles on it

Jayhovah · 07-26-2017, 09:23 AM

Don't feel too bad - plenty of people with brand new stillen kits have all sorts of problems too.

nschutt338 · 07-26-2017, 10:39 AM

Quote:

Originally Posted by NissanTracker

Sounds about right. Member told me there was only 10 K miles. All pullies were SHOT. No way there was 10K miles. I have a thread open for my current issue with the kit. In summary, the charge cooler in the plenum had a pin size hole. Went on the dyno after install and 6.5 PSI of coolant flooded my cylinders when it went into vacuum. I'm not at all a happy camper. I have not run into a blower issue YET... but I'm sure that will come soon too. And yeah... If I threw an extra 1,500, I would have had a brand new kit.

Sorry to hear man trust me I know the pain. The guy had a shop take it off and they had to send parts 3 different times as they forgot to send the whole kit or didn't know what went with it. Also had to buy NISMO specific items which was an extra grand that I didn't really need. It was a headache car was down for 3 months due to all the complications.

Quote:

Originally Posted by Jayhovah

Don't feel too bad - plenty of people with brand new stillen kits have all sorts of problems too.

That is ridiculous to say the least. How do you like the gamma kit? Do you have a build thread i'm interested in numbers and psi and what not. I just picked up the v2 kit.

Jayhovah · 07-26-2017, 10:56 AM

Quote:

Originally Posted by nschutt338

Sorry to hear man trust me I know the pain. The guy had a shop take it off and they had to send parts 3 different times as they forgot to send the whole kit or didn't know what went with it. Also had to buy NISMO specific items which was an extra grand that I didn't really need. It was a headache car was down for 3 months due to all the complications.

That is ridiculous to say the least. How do you like the gamma kit? Do you have a build thread i'm interested in numbers and psi and what not. I just picked up the v2 kit.

Love my Gamma kit, but it appears Gamma is out of business =(
Build thread and pic dump threads are in my Sig. I am making 520whp @10.5psi. Internal wastegates are setup for 8.5psi but it creeps in the higher gears to 10.5. Currently my power is limited by my relatively small fuel system - hope to remedy that in the future with parts this thread was created for.... Any questions feel free to ask in one of my threads.

nschutt338 · 07-26-2017, 11:00 AM

Quote:

Originally Posted by Jayhovah

Love my Gamma kit, but it appears Gamma is out of business =(
Build thread and pic dump threads are in my Sig. I am making 520whp @10.5psi. Internal wastegates are setup for 8.5psi but it creeps in the higher gears to 10.5. Currently my power is limited by my relatively small fuel system - hope to remedy that in the future with parts this thread was created for.... Any questions feel free to ask in one of my threads.

Ahhh thanks I have the walbro 485, id 1000 and looking at running e85. Just one question if you are running on a stock block and daily?

Jayhovah · 07-26-2017, 11:04 AM

Quote:

Originally Posted by nschutt338

Ahhh thanks I have the walbro 485, id 1000 and looking at running e85. Just one question if you are running on a stock block and daily?

Yes and Yes.

That is also the exact fuel system I am hoping to run.... 1000cc, Walbro 485, and S1.E or S1.SE return setup...

nschutt338 · 07-26-2017, 11:13 AM

Quote:

Originally Posted by Jayhovah

Yes and Yes.

That is also the exact fuel system I am hoping to run.... 1000cc, Walbro 485, and S1.E or S1.SE return setup...

Spoke with cjm if youre looking at being 650 or over they strongly recommend their rails as the stock fpd's haven't been tested that high nor from numbers seems safe. but the rails are on a 6 week back order.

Jayhovah · 07-26-2017, 11:25 AM

Quote:

Originally Posted by nschutt338

Spoke with cjm if youre looking at being 650 or over they strongly recommend their rails as the stock fpd's haven't been tested that high nor from numbers seems safe. but the rails are on a 6 week back order.

Yeah I am not sure what I will do at this point - but most likely I'll be looking to purchase a used setup from someone's partout. Going for brand new injectors, pump, return setup, rails, flex fuel kit, and a retune adds up to more than I want to spend for another 100-150whp.

Elmo370z · 07-26-2017, 12:04 PM

Quote:

Originally Posted by Jayhovah

Yeah I am not sure what I will do at this point - but most likely I'll be looking to purchase a used setup from someone's partout. Going for brand new injectors, pump, return setup, rails, flex fuel kit, and a retune adds up to more than I want to spend for another 100-150whp.

You say brand new. I have your injectors and S1E return

Jayhovah · 07-26-2017, 12:21 PM

Quote:

Originally Posted by Elmo370z

You say brand new. I have your injectors and S1E return

LOL I think you saw what you wanted

I worded it kind of confusingly...

Quote:

Originally Posted by Jayhovah

Yeah I am not sure what I will do at this point - but most likely I'll be looking to purchase a used setup from someone's partout. Going for brand new injectors, pump, return setup, rails, flex fuel kit, and a retune adds up to more than I want to spend for another 100-150whp.

07-21-2017, 06:22 AM	#1 (permalink)
nschutt338 Base Member Join Date: Aug 2015 Location: nc Posts: 77 Drives: 2014 nismo 370z Rep Power: 9	CJM Fuel Return or any Just seeing if there are any kits laying around no one got around to installing or took off to upgrade. Open to other fuel return systems but prefer cjm. Shoot me a text for faster response. 6 one nine 3 zero two 55 zero eight

07-24-2017, 11:52 AM	#2 (permalink)
nschutt338 Base Member Join Date: Aug 2015 Location: nc Posts: 77 Drives: 2014 nismo 370z Rep Power: 9	Purchased new anyone know how to close thread? or MODS please close NissanTracker likes this.

07-25-2017, 09:05 PM	#4 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 724 Drives: 07' Nismo, 14' Nismo Rep Power: 29261	With a fuel return kit, new is the way to go. You made a good choice. Others would agree. There are just some things you don't want to cheap out on. Exhaust stuff.. ok, intake pipes.. fine. Anything forced induction or fuel related is iffy. I'm currently going through this experience with a used Stillen S.C. Just not worth the agony and pain. In the end, you supported one of the vendors! nschutt338 likes this. Last edited by NissanTracker; 07-25-2017 at 09:10 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CJM S2.SE fuel return install question	Irishrogue	Engine & Drivetrain	5	03-16-2017 04:28 PM
Fuel return	StillenZ84	Forced Induction	17	01-27-2017 09:02 PM
[FOR SALE] Fuel return system, fuel rails, oil cooler cores	Jshvr	Parts for sale (Private Classifieds)	38	11-16-2016 04:25 PM
Fuel Return Option	O&G	Engine & Drivetrain	6	10-01-2013 08:40 PM
[FOR SALE] AAM Fuel Return System	Kim@Forged	Parts for sale (Private Classifieds)	13	04-11-2013 01:47 PM