FRS/BRZ 11.3 @ 127 stock engine

Compdoc777 · 09-08-2012, 03:28 PM

Quote:

Originally Posted by Red__Zed

But it hasn't been around since the 90s like you claimed.

The Subaru EJ engine is a series of automotive engines manufactured by Subaru and introduced in 1989, intended to succeed the previous Subaru EA engine. The EJ series is the mainstay of Subaru's engine line, with all engines of this series being 16-valve flat-4 horizontal, with configurations available for single-, or double-overhead camshaft arrangements (SOHC or DOHC). Naturally aspirated and turbocharged versions are available, ranging from 96 to 320 horsepower. These engines are commonly used in light aircraft, kit cars and engine swaps into air-cooled Volkswagens, but it's also popular as a swap into the wasserboxer engined Volkswagen Type 2. Primary engineering on the EJ series was done by Masayuki Kodama, Takemasa Yamada and Shuji Sawafuji of Fuji Heavy Industries, Subaru's parent company.

Please explain to me why you think this?

Here's link to a little reading material:
http://en.wikipedia.org/wiki/Subaru_EJ_engine

Red__Zed · 09-08-2012, 05:23 PM

Quote:

Originally Posted by Compdoc777

The Subaru EJ engine is a series of automotive engines manufactured by Subaru and introduced in 1989, intended to succeed the previous Subaru EA engine. The EJ series is the mainstay of Subaru's engine line, with all engines of this series being 16-valve flat-4 horizontal, with configurations available for single-, or double-overhead camshaft arrangements (SOHC or DOHC). Naturally aspirated and turbocharged versions are available, ranging from 96 to 320 horsepower. These engines are commonly used in light aircraft, kit cars and engine swaps into air-cooled Volkswagens, but it's also popular as a swap into the wasserboxer engined Volkswagen Type 2. Primary engineering on the EJ series was done by Masayuki Kodama, Takemasa Yamada and Shuji Sawafuji of Fuji Heavy Industries, Subaru's parent company.

Please explain to me why you think this?

Here's link to a little reading material:
Subaru EJ engine - Wikipedia, the free encyclopedia

Because this car has an FA20, not an EJ. My WRX has an EJ.

The FA was based off the FB, but even then, completely different.

Next?

Iceagetlc · 09-08-2012, 05:56 PM

Quote:

Originally Posted by Red__Zed

Because this car has an FA20, not an EJ. My WRX has an EJ.

The FA was based off the FB, but even then, completely different.

Next?

@Compdoc: Apply cold water to the affected area.

visconti · 09-08-2012, 06:46 PM

We removed the front cat and lowered the boost to 18PSI - We are out of MAF so didn't pull it all the way.

Going SD very soon.

b1adesofcha0s · 09-08-2012, 06:55 PM

Isamu · 09-08-2012, 08:09 PM

Quote:

Originally Posted by Huckleberry

two cars/one engine.

hawt.

Isamu · 09-08-2012, 08:10 PM

Quote:

Originally Posted by UNKNOWN_370

Truth is, the Z will need $35k or more in mods to run times like that. The question is... Who's willing to pay it? I been doing research on it cuz i want to go FI. I'm quickly giving up hope. Good news is. I have nearly 10k saved for a turbo. Maybe i will just keep saving for the future FI Z or other car later and put premium NA mods on the Z, then pass it to my wife when i get the new turbo'd next gen car.

The flipside is... once the Z is attainable for 22k or less used? YOU WILL SEE 11 SECOND Z's. Cost of ownership plus cost of going FI sways a lot of people. People are boosting the BRZ cuz it can be had for 26k and the cars are new so they are getting sponsor discounts. We and mitsu see the highest prices in mods for a non premium brand.

35k in mods? are you high? I'm willing to bet, with a better driver(as I am not certain of my drag strip skills) and better tires I will hit low 11 seconds...

Red__Zed · 09-08-2012, 08:18 PM

Quote:

Originally Posted by Isamu

35k in mods? are you high? I'm willing to bet, with a better driver(as I am not certain of my drag strip skills) and better tires I will hit low 11 seconds...

Based on what?

Compdoc777 · 09-08-2012, 08:20 PM

Quote:

Originally Posted by Iceagetlc

@Compdoc: Apply cold water to the affected area.

Yes DI and VVL... Totally different I'll need to take a cold shower!

Red__Zed · 09-08-2012, 08:24 PM

Quote:

Originally Posted by Compdoc777

Yes DI and VVL... Totally different I'll need to take a cold shower!

You're kidding right? Please tell me you are trolling...

shadoquad · 09-08-2012, 08:29 PM

Quote:

Originally Posted by Isamu

35k in mods? are you high? I'm willing to bet, with a better driver(as I am not certain of my drag strip skills) and better tires I will hit low 11 seconds...

I'd love you to put big rubber on supernova & have a pro try a 1/4 mi run in hrr!

Isamu · 09-08-2012, 09:19 PM

Quote:

Originally Posted by shadoquad

I'd love you to put big rubber on supernova & have a pro try a 1/4 mi run in hrr!

I do way better on the twisties..

Jordo! · 09-08-2012, 09:19 PM

That is very impressive.

I just want one making about 200 lbft from 2K RPM and peaking at a much more modest value, like 225ish.

If that were available with a warranty from Toyota, I'd be shopping for one right now.

shadoquad · 09-08-2012, 09:55 PM

Quote:

Originally Posted by Isamu

I do way better on the twisties..

I'm with ya, bro. Just sayin', I know you're pushing some serious powa!!!

Isamu · 09-09-2012, 01:55 AM

Quote:

Originally Posted by shadoquad

I'm with ya, bro. Just sayin', I know you're pushing some serious powa!!!

at least one of the OG's recognizes... lol

09-08-2012, 06:55 PM	#80 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	__________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

09-08-2012, 09:19 PM	#88 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 417	That is very impressive. I just want one making about 200 lbft from 2K RPM and peaking at a much more modest value, like 225ish. If that were available with a warranty from Toyota, I'd be shopping for one right now. __________________ Enjoy it. Destroy it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Safe amount of HP for stock engine?	$hytz_!ntyn$e	Forced Induction	75	07-26-2012 10:09 AM
Stock engine strength	Mino	Nissan 370Z General Discussions	1	06-17-2012 04:20 PM
Need SoCal car with stock engine.	Jamaica	Southern California Region	0	04-06-2012 12:52 AM
How strong the stock 370z engine is	Lebaid	Forced Induction	1	12-04-2011 11:16 AM
WTB: Stock engine parts	nexus4400	Parts for sale (Private Classifieds)	1	09-29-2010 01:34 PM

09-08-2012, 06:46 PM	#79 (permalink)
visconti Enthusiast Member Join Date: Jul 2012 Location: Norwalk, CT Posts: 455 Drives: Sub WRX STi Rep Power: 12	We removed the front cat and lowered the boost to 18PSI - We are out of MAF so didn't pull it all the way. Going SD very soon.