Frontier VK swap

sirnixalot · 01-30-2021, 06:52 AM

Found someone scrapping a 2010 Altima so I got the front seats out of that. I was going to use the ones from the Z but I wanted leather and this was cheaper than recovering the Z seats. The frontier seats have next to no side support so these will keep me from propping my self up on the door panels every roundabout

sirnixalot · 02-01-2021, 06:53 PM

Fuel pump upgrade complete! Swapped an AEM 51-1200 340LPH pump in a brand new Carter fuel pump module.

Comparison between the two pumps. Same diameter but the AEM is a little taller, made no difference for the install.

The plastic piece that pump fits into was broken away from the upper half of the assembly when I opened the unit but it doesn't really affect the operation. I reused the Carter fuel pump sock

All buttoned up and ready to ship out

sirnixalot · 02-11-2021, 08:15 AM

Cams/valve springs delivered

sirnixalot · 02-14-2021, 02:19 PM

I just realized they quoted me 272* 12mm lift intake and 289* 11.9mm lift exhaust but I got 276* 12mm lift intake and 290* 11mm lift exhaust.

Not that it matters to much to me, JWT knows what they are doing. Can't wait to hear it crank up

01-30-2021, 06:52 AM	#1 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57456	Found someone scrapping a 2010 Altima so I got the front seats out of that. I was going to use the ones from the Z but I wanted leather and this was cheaper than recovering the Z seats. The frontier seats have next to no side support so these will keep me from propping my self up on the door panels every roundabout JARblue, cv129 and Rusty like this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

02-01-2021, 06:53 PM	#2 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57456	Fuel pump upgrade complete! Swapped an AEM 51-1200 340LPH pump in a brand new Carter fuel pump module. Comparison between the two pumps. Same diameter but the AEM is a little taller, made no difference for the install. The plastic piece that pump fits into was broken away from the upper half of the assembly when I opened the unit but it doesn't really affect the operation. I reused the Carter fuel pump sock All buttoned up and ready to ship out FL 4Motion and Rusty like this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

02-11-2021, 08:15 AM	#3 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57456	Cams/valve springs delivered FL 4Motion, cv129, Rusty and 2 others like this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

02-14-2021, 02:19 PM	#4 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57456	I just realized they quoted me 272* 12mm lift intake and 289* 11.9mm lift exhaust but I got 276* 12mm lift intake and 290* 11mm lift exhaust. Not that it matters to much to me, JWT knows what they are doing. Can't wait to hear it crank up FL 4Motion and Rusty like this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap Last edited by sirnixalot; 02-14-2021 at 05:30 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
4.08 Frontier gear swap	jnaut	Engine & Drivetrain	157	01-23-2015 01:47 AM
2013 Nissan Frontier - 21k	Mike	Other Vehicle For sale	1	08-25-2014 06:09 PM
4.08 frontier gears and LSD	quicksilver08	Engine & Drivetrain	8	08-08-2011 08:09 AM
New Frontier Pics and Dad's Mercedes SL	HKYStormFront	Photography	3	05-10-2011 09:51 PM
Anyone here own a Nissan Frontier?	kannibul	Other Vehicles	12	12-08-2009 01:53 PM