Bad MAF sensor(s)

waahbahbopbop · 01-08-2015, 11:32 PM

It turns out I didn't actually have a problem. After already having two dented top pipes from Stillen the new set they sent out to me (and others I'm assuming) also had a fault. One of the pipes had the holes for the MAF sensor drilled backwards and I must not have noticed when I installed them. I believe the passenger side pipe was the culprit but stillen once again sent new pipes which resolved the problem.

Hope you find the solution to your issue

Kaldaien · 01-31-2015, 06:55 AM

Really? That kind of shakes my confidence in Stillen. It sounds like their customer service is great, but being shipped defective products multiple times like that rubs me the wrong way.

Hopefully this was some freak occurrence and not a decline in quality control.

Nut_N_Much · 01-31-2015, 08:01 AM

Stillen is on my Team Awesome list. Bad list to be on. Team Awesome are the worst people, venders, trade, etc.

STILLEN TEAM AWESOME !!!!!!

They would not sell me a replacement pulley for there kit with out signing a waver. They would only accept money order for the trans action. Second time I needed a replacement bolt for SC bracket. Same thing; made me sign waver and would not take credit, check, paypal, only money order.

That burnt up a weeks worth of time waiting to just get items shipped. I dislike them very much!

Nerminmah · 06-16-2018, 01:35 PM

I had that exact same issue.
Check engine light came on
Went in to check the code and it was P010B
Thought it could be my filters/sensor being dirty
Took everything out saw it was all clean and perfect. Checked on my battery and noticed the negative was loosened and not tightened the right way. Disconnected it checked the positive waited 15 min connected and put everything back together. Turned the car on and bam it a been off since. My problem turned out to be small.

01-08-2015, 11:32 PM	#1 (permalink)
waahbahbopbop Base Member Join Date: Mar 2014 Location: Fallston, MD Posts: 36 Drives: 40th Anniversary M6 Rep Power: 13	It turns out I didn't actually have a problem. After already having two dented top pipes from Stillen the new set they sent out to me (and others I'm assuming) also had a fault. One of the pipes had the holes for the MAF sensor drilled backwards and I must not have noticed when I installed them. I believe the passenger side pipe was the culprit but stillen once again sent new pipes which resolved the problem. Hope you find the solution to your issue Trips, Elmo370z and Kaldaien like this.

01-31-2015, 08:01 AM	#3 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 28	Stillen is on my Team Awesome list. Bad list to be on. Team Awesome are the worst people, venders, trade, etc. STILLEN TEAM AWESOME !!!!!! They would not sell me a replacement pulley for there kit with out signing a waver. They would only accept money order for the trans action. Second time I needed a replacement bolt for SC bracket. Same thing; made me sign waver and would not take credit, check, paypal, only money order. That burnt up a weeks worth of time waiting to just get items shipped. I dislike them very much! __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

06-16-2018, 01:35 PM	#4 (permalink)
Nerminmah Base Member Join Date: Nov 2017 Location: Missouri Posts: 4 Drives: 2013 370z red manual Rep Power: 9	I had that exact same issue. Check engine light came on Went in to check the code and it was P010B Thought it could be my filters/sensor being dirty Took everything out saw it was all clean and perfect. Checked on my battery and noticed the negative was loosened and not tightened the right way. Disconnected it checked the positive waited 15 min connected and put everything back together. Turned the car on and bam it a been off since. My problem turned out to be small. SouthArk370Z likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
map sensor	kenny's 370z	Engine & Drivetrain	16	11-12-2014 04:23 PM
[WTB] O2 Sensor	ALV233	Parts for sale (Private Classifieds)	4	10-04-2013 12:26 PM
Viper Security System/Tilt sensor/Proximity sensor	kfull	Nissan 370Z General Discussions	4	04-27-2012 12:10 AM
Abs sensor	Axelsc1	Brakes & Suspension	7	02-10-2012 12:10 PM
WTB: oem AFR sensor	DJ_TJ	Wanted	9	01-18-2010 04:46 PM

01-31-2015, 06:55 AM	#2 (permalink)
Kaldaien Base Member Join Date: Jan 2015 Location: Cape Coral, FL Posts: 167 Drives: 2015 370z Nismo Tech Rep Power: 13	Really? That kind of shakes my confidence in Stillen. It sounds like their customer service is great, but being shipped defective products multiple times like that rubs me the wrong way. Hopefully this was some freak occurrence and not a decline in quality control.