|
Look under the dash and follow the brake pedal to the highest point you should see the switch. it is held in place by a locking nut that needs to
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
12-13-2016, 03:13 PM
|
#2 (permalink) |
|
Administrator
Join Date: May 2009
Location: Disneyland
Posts: 8,736
Drives: 🔰
Rep Power: 10   |
Look under the dash and follow the brake pedal to the highest point you should see the switch.
it is held in place by a locking nut that needs to be loosened so it can be removed. Make a note of the position of the original so the replacement is installed correctly. If the adjustments off the brake lights will either stay on while no brakes are being applied or they won't come on since its over adjusted. EDIT: IF your brakes light do come as normal? There's nothing wrong with the tail light switch and you'll have to disregard my above instructions. Good Luck!
__________________
  Last edited by Trips; 12-13-2016 at 03:15 PM. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Slip/Abs/brake light all come on after tire change and 4.08 install problems | Chasingstatus | Engine & Drivetrain | 10 | 04-10-2016 01:09 PM |
| [WTB] Headlights, brake light, lower control arm, trunk switch | monaser1994 | Parts for sale (Private Classifieds) | 7 | 03-12-2015 11:37 PM |
| DIY: Rear Fog Light install with Nissan Switch ($20 total) | starcms | DIY Section (Do-It-Yourself) | 2 | 08-19-2014 05:13 PM |
| Third Brake Light Re-install | Carbon_z | Exterior & Interior | 8 | 03-10-2011 09:25 PM |
3Likes
Threaded Mode
