Vert mods (with pics)

OldGuyFla

I think it just makes the roadster look so much better & it stands out from all the ones without. I haven't seen another roadster with a spoiler, but I haven't seen too many other roadsters either.

Bummer

I completely agree. I think the Roadster needs the spoiler. It takes away the bubble butt look.

I've seen one other Roadster on the road. I've only seen a few Coupes since '12 when I actually started looking for them. Ford sold more Mustangs in February than Nissan has sold 370Z Roadsters to date. Total 370Z sales are less than a year of Mustangs. These are rare cars and I'm ok with that. Nissan probably isn't as happy about it as I am.

__________________
Steve

GOBLUE

I'm not sure how adding more bulk to the rear end improves the bubble butt look, but hey to each his own. I think the black vinyl wrap on the small section surrounding the tailpipes does more to reduce that, at least on colors other than black or black cherry. I've been contemplating that lately. Definitely agree it has a bit of Beyonce going on back there.

__________________
2010 370Z Roadster, Touring 6MT, Pearl White on Black, FI CBE

Bummer

Ah, but put a short flipped up skirt on Bouncey's butt and it looks less bad.

Maybe it's just me?

__________________
Steve

TX370ZVert

I added a spoiler to the back of mine and I think it's a big improvement!!

Attached Images

	IMG_3524.jpg (383.1 KB, 59 views)
	IMG_3536.jpg (431.9 KB, 65 views)

OldGuyFla

Looks great, enjoy. Now you need to get rid of that long antenna.

__________________

Black2012

calipers/stainless lines, exhaust next

Attached Images

	image.jpg (287.1 KB, 35 views)
	image.jpeg (159.8 KB, 42 views)

gonzales25

Just added some Rohana's now I need to add spacers. Not sure if I need a camber kit? I ordered one just in case. I'm lowered on eibachs. Anyone know if I'm still in specs or I will I definitely need the camber kit?

Attached Images

IMG_1142_1.jpg (496.9 KB, 67 views)

Zbrah

Your alignment guy will be able to tell you if you're within specs or need the camber kit when they perform an alignment the car. Have you taken your car in for an alignment after you had the springs put on?

__________________

gonzales25

I had to put on camber arms, my rear is just out of specs -2.7 rear on both sides (I like how it looks) most important is that toe is in specs. I also put on 15mm spacers on the rear to bring my wheels out to sit pretty much flush.

suzook

for those with the stillen intakes, how do you clean the airfilters. Mine had them installed when I bought it and other than taking the whole intake apart I cant see how to clean them

OldGuyFla

You might want to look at these links

DIY: Finally Installed The STILLEN G3 Intake today! Lots of Pics inside (AK370Z)

You could ask your question on this link & probably get an answer there.

__________________

Bummer

I have one of the 3" "carbon fiber" antennas. It isn't actually carbon fiber and it isn't actually an antenna. For an antenna to work it has to have a wire, or some form of metal in it. These are just decorative plastic tubes.

I don't tune off of satellite unless I must. I've gotten used to it and when I do have to listen to good old "radio" I tend to twitch. I've ordered a replacement for the 3" antenna, which came apart just above its base. The new one is only about 3/4" long. No bigger than the base of the one I have. It's due here Wednesday. It'll suck as an antenna but it should look good.

So, if you are interested in good looks, go shopping for antennas on fleabay. If you want reception, as OldGuyFla suggested, stick with the OEM.

__________________
Steve

TX370ZVert

All good info...not going with XM cause i have an issue with paying for the privilege of listening to music. I'm either using itunes, streaming, or old fashioned radio. Guess I'll be sticking with the OEM.

OldGuyFla

I have to use satellite due to living way out in the country. before having a radio that could get satellite I had to carry CDs.

__________________