its a walbro 255.. i got it used and its been in the car maybe 2 yrs.. the filter/strainer was designating, so not sure if that sent debris into the pump

Got my alignment done finally. Hooks if I want it to and will break loose if I want it to. I'm liking these Nittos so far.

Awesome feeling too when I bring the 370 to a shop like that where they have GT-R's and other cars like that on a daily basis and they all tell me that it's one of the nicest cars they've seen in a while

Was it the driver bank that was dirtier? That's what I noticed when I cleaned mine last week. Some of the residue along the edge of the butterfly valve was virtually impossible to remove, even after repeated application of throttle body cleaner.

lol there was an rs3 when I dropped my car off... then when I went to pick up there was a gtr, 911 turbo-s and another carerra grrrr

I had been to the dearlership with 'service engine soon' light up. They said something got inside to air-pressure sensors by accident, and cleared it so now no problem.

Sent from my SM-G930V using Tapatalk

Actually driver side was pretty clean. Passenger side was blacker than my soul

Removed 4' of rubber this afternoon,,,gonna get a good cleaning,inspection,rotation & socked back on for Zdayz!https://uploads.tapatalk-cdn.com/201...f4e43df824.jpg


Sent from my iPhone using Tapatalk

Had everything to do it, just didn't have the gonads to follow through. Had a fitted car cover this year and in two wind storms blew the cover off except it stayed on because of the mirror pockets. With it flappin' in the wind some scuff marks appeared, last weekend worked on the spoiler and came out nice, figured tonight I would work on my 3 year old VIS AMS hood. Took about 3 hours, car is sitting inside because I put a sealer on it. For 3 years old (hood), me thinks it looks pretty good, each night I'll do a panel or 2 until I'm done or it kills me.

Here are the results.
http://i14.photobucket.com/albums/a3...427_204152.jpg

http://i14.photobucket.com/albums/a3...427_204544.jpg

Spotted these gems rotting on the shelf doing inventory last week. Decided it about time they get burned up. https://uploads.tapatalk-cdn.com/201...6a803fa4fd.jpg


Sent from my iPhone using Tapatalk

New wheels on, need a car wash.

https://www.dropbox.com/s/m5ig7w97kh...20PM.jpg?raw=1

Pulled my intake manifold. Going to retap it as I'm hoping the crappy job I did the first time is the source of my wobbly idle...https://uploads.tapatalk-cdn.com/201...a604eb6863.jpg

Sent from my Nexus 6P using Tapatalk

Which mani are you going with?

Sent from my SM-N910P using Tapatalk

Same oem... I just did a crappy job when I tapped it for BOV lines so I'm going to try and fix it up to see if it stabilizes my idle... Throwing darts in the dark lol.

Sent from my Nexus 6P using Tapatalk

Lol, you never know...even a blind squirrel finds a nut every now and then! :eek:

Sent from my SM-N910P using Tapatalk

dogdamn... wash ur engine bay mang. :barf:

Cleaned up

http://i44.photobucket.com/albums/f2...psexvmhfty.jpg

Holy crap that's terrible picture quality

I know right? The only thing filthier is what I did to your mom last night.

Sent from my Nexus 6P using Tapatalk

How do you like the louvers?
I like the look, but I worry about visibility.

Kirk B.

Put in some LED interior lights

https://farm3.staticflickr.com/2837/...bc6b16_z_d.jpg

tmi!!

I'm like where? and noticed ahhh da map lights? White light

Yes. Nice bright white light :tup:

looks good. did u do da GTR lenses too? i put dose in my ride with white LED's, holy dogdamn.. looks :excited:

washed and waxed mine too! waterless wash with a pump spray bottle is so much easier and cleaner to work with

[IMG]<a href="http://s1053.photobucket.com/user/andy11466/media/ee090911-8981-4115-a55a-c8df1945ef76_zps4mti76mb.jpg.html" target="_blank"><img src="http://i1053.photobucket.com/albums/s479/andy11466/ee090911-8981-4115-a55a-c8df1945ef76_zps4mti76mb.jpg" border="0" alt=" photo ee090911-8981-4115-a55a-c8df1945ef76_zps4mti76mb.jpg"/></a>[/IMG]

Thx. No clear lenses. Glad I didn't, it would be even brighter

^ understandable.



for me, motored my Z dis am, had a good drive, fueled and QD'ed. going to check on her wheels later if they need some cleaning

You quoted the first post in the thread from 2012 :icon17:

I redlined 2nd gear 5 different times on the way to the office this morning just to make me :)

Got up and took a cruise to my mechanic, couldn't take my car until Wednesday, so then why was I told to come in? Anyways, 50 km of pure freeway bliss with the windows down with the system up.

some fuel stuff
http://i393.photobucket.com/albums/p...pskgggutmx.jpg
http://i393.photobucket.com/albums/p...pss8noa84n.jpg

looks like someone got fed up with making fast right turns..

i lol'ed when i was out dis am in my Z with less dan half a tank of gas and made a quick right and into da expressway i backed off da throttle. wat a faking pos feeling dat waz. :ugh2: da wiser side of me kicked in.. :ugh:

I went to a car show last night. I saw two cars that made me squirt baby gravy.

So little bit of good news, looks like my head gasket is ok, but radiator is blocked up. Also fixed the axle clicking with a fresh coating of molykote and some brand new axle nuts and cotter pins

lmfao, I thought I was on the last page. oops:rofl2:

I installed some Z1 post MAF tubes and breather tubes that I bought from 40 to 322. It really cleans up the engine bay

after 7 weeks without her!
 

Spent some quality time with her this morning polishing the headlights. she still needs a wash and some small detail ,but im too tired from a long week at work.
Anyway it was at the body shop for almost 2 months being partially painted and according to the body shop ,Nissan kept sending the wrong parts.
It is so perfect now ,not a chip or mark on it for now. im hoping to keep her from more than normal wear and tear ,the small stuff is unavoidable as she is my daily driver.
Kind of a time capsule now due to only 50k miles and a newly restored body.
The reson for the stay at the body shop was a road debris strike that messed up the bumper and the left side skirt. :hello::driving:

34 row FI oil cooler installed today with an oil change. Oh what fun. One step closer to Zdayz. I have the new OS Giken diff to get installed and brake fluid to flush. I will be ready to go besides a good wash and cleaning.

Happy to read that you finally got your Z back bro.

polish time
 

I noticed the water was not beading after the wash. It was time for some hard labor in the florida heat. next up is wax. :driving:

Waxed and washed for the first time since buying. Now that my other car is sold, it finally feels like I joined the club!

1 of the best low maintenance colors too :tup: