shop tells me i have frame damage!!

forza370z

That is strange. Spacers shouldn't get you that much negative camber. And you stated you didn't have any collisions. Car is on stock suspensions. I'd re-check if the spacer is installed correctly. Are there any loose bolt? Re-tighten them but don't over tighten too(80ib of torque).

__________________
09 PW 370z Nismo | K&N Drop Ins | HKS Hi Power | Berk HFCs | Work Meister S1 3P | Project Kics R40 Neo Chrome Lug Nuts | KW V1 | SPC rear camber arms/toe bolts | Southbend Stage 3 daily clutch | Southband 19Ib Steel Flywheel | ZSpeed CSC

PersianLegacy

The spacer was a bolt on. used a torque wrench to get it exactly at 80. i have checked the spacer its not loose or damaged or bent..

forza370z

Hmmm... very interesting. So if you take the spacer off will the camber back to normal? If not, then something else is up.

__________________
09 PW 370z Nismo | K&N Drop Ins | HKS Hi Power | Berk HFCs | Work Meister S1 3P | Project Kics R40 Neo Chrome Lug Nuts | KW V1 | SPC rear camber arms/toe bolts | Southbend Stage 3 daily clutch | Southband 19Ib Steel Flywheel | ZSpeed CSC