Is it just me or has carbon fiber gone stupid?

TreeSemdyZee · 12-17-2012, 08:21 PM

Quote:

Originally Posted by nmjaxx9

did you try bandaging his bad eye, or using your Rocky balboa strength you should have held him down and had someone else wrap him.

Get this. HIS name was Rocky.

nmjaxx9 · 12-17-2012, 08:22 PM

Quote:

Originally Posted by TreeSemdyZee

Get this. HIS name was Rocky.

TreeSemdyZee · 12-17-2012, 08:35 PM

Quote:

Originally Posted by nmjaxx9

Way.

SouthArk370Z · 12-17-2012, 08:44 PM

Quote:

Originally Posted by TreeSemdyZee

I tried to CF wrap my dog, but the little bastage wouldn't hold still.

Don't ya just hate farging bastages?

nmjaxx9 · 12-17-2012, 08:50 PM

Quote:

Originally Posted by Dixnot

Its kinda like fat women in the 20's... they looked good cause they were the fad... thank god thats gone..... CF is next to go i hope

really were fat women ever the fad, I mean ****, they make good ohs but other than that.

back on topic: CF is cool as long as its not the cover, the real thing gets a check in my book, fake covers not so much.

TreeSemdyZee · 12-17-2012, 08:51 PM

Quote:

Originally Posted by SouthArk370Z

Don't ya just hate farging bastages?

Second only to farging iceholes.

CSA0890 · 12-17-2012, 09:25 PM

Quote:

Originally Posted by TheGreatOne

FYI, the 370Z has a Carbon Fiber driveshaft

Sort of its supposedly some sort of plastic with a carbon fibre shell.

jcosta79 · 12-18-2012, 01:42 PM

I will give you an example of what I am talking about:

If you look on E-Bay you can find "carbon fiber" hoods for the 370Z for around $350. I can tell you without even looking at all of them that the hoods are garbage. They weigh more than your stock aluminum hood and are not as strong. They just have a couple layers of carbon fiber matting to achieve the "look" and so that they can legally call it carbon fiber, but the rest is all resin and FRP.

What I don't understand is why someone would buy a hood like this. If it's for looks, just wrap the hood you have now in CF vinyl. (Still gay, but whatever) If you think you are getting a better quality piece because it's "carbon fiber", you are unfortunately very mistaken. The fit and finish of the piece is going to be horrible, the strength is much less than stock and it will be heavier than stock. There is nothing "better" about it versus your stock aluminum hood.

A quality carbon fiber hood would cost around $4K-$5K and will still look and fit like garbage because it will most likely be built for racing. Race car body panels don't "bolt on" and fit like panels built for street cars do, they just don't. They also don't look pretty because they are built for racing and nobody cares. They are likely going to get painted or wrapped and soon after crashed anyway.

My take is, unless you are going racing and spending big dollars on "real" carbon fiber to reduce weight, CF parts are just for show and pretty lame (IMHO).

VDC_OFF · 12-18-2012, 01:52 PM

Quote:

Originally Posted by DEpointfive0

Agreed, it's now more for looks, and most pieces weigh MORE than OEM, so if the person thinks it'll weigh less, I want to beat them... If they want to do it for looks, do it, no problem

I don't like red CF though, even if the car is red...

Top secret says this hood weighs 20lbs less than OEM

370ZTUNE.com

kenchan · 12-18-2012, 01:54 PM

Quote:

Originally Posted by homeryansta

*puts on flame suit*

Has the carbon fiber fad gone stupid? On par with the hellaflush crowd imo.

when given to some poor folk with bad taste, yes.

jcosta79 · 12-18-2012, 02:36 PM

Quote:

Originally Posted by VDC_OFF

Top secret says this hood weighs 20lbs less than OEM

From their website:

Quote:

*Top Secret recommends use of hood pins.

There's a reason.

VDC_OFF · 12-18-2012, 02:39 PM

Quote:

Originally Posted by jcosta79

From their website:

There's a reason.

I thought all carbon hoods and trunks are recommended with hood pins.

MC · 12-18-2012, 03:36 PM

im still a carbon fiber fanboy but my tastes have gone to liking it more for accents now instead of full bodypanels so in a wayt that might have been a fad. i think if your car is stock looking wheels and all then you have a carbon hood or fenders it looks weird. ive spent a good bit of money for some small rare pre preg dry carbon pieces for my car but i think in some cases it can be overdone or more commonly misused

I hate seeing different weaves matched up against one another on cars (especially the interior) like 1X1 next to 2X2 and i think even mixing and matching gloss and matte sort of ruin the look

and lastly im not judging anyone if you do it but i cant understand the new trend of wrapping everything with the 3M carbon print Vinyl. i see it everywhere now and even on high end cars. i just dont get it. It "looks" ok as i used some of it to wrap my gran turismo steering wheel for my racing cockpit but i wouldnt let that stuff go within 10 feet of my car. I get people like the look but if you do it you cant say a damn thing about neons or intercoolers not attached to anything or any of that.

kenchan · 12-18-2012, 03:40 PM

yah, while do use dinoc on my interior i dont use it in large areas... it's just a pattern accent i added vs the plain matte black trims my Z came in. i prefer matte on the interior pieces as i hate reflection.

even real CF pieces, i dont like it in large areas. just simple accents here and there is enough for me. (mines's rear wing tip and ings+ front lip and fangs).

MC · 12-18-2012, 03:51 PM

i havent followed it as much over here but you guys wouldnt believe the hoods roofs and wings ive seen wrapped in it over in the GTR community. i think its just me being a hater as its always followed by 10 comments of looks nice or awesome job.

but back to the CF fad thing..i guess in some ways at least aftermarket wise replacement parts sort of are a fad as if the definition is something thats not as popular now as it used to be. I remember a few years back everyone had a carbon hood or something of that nature.

most manufacturers have gone to using it as accents all the way up to what was mentioned before as the high end cars use it in the chassis. for example i think the M3 with the carbon roof is cool and things of that nature. I tend to like it more when it comes from the factory like that instead of aftermarket add ons. factory carbon is eye candy but piling on aftermarket maybe can be a bit much these days

View Poll Results: Has the carbon fiber fad gone stupid?
Yes	59	55.14%
No	21	19.63%
I don't care.	27	25.23%
Voters: 107. You may not vote on this poll

12-18-2012, 01:42 PM	#38 (permalink)
jcosta79 A True Z Fanatic Join Date: Jul 2012 Location: N/A Posts: 1,430 Drives: N/A Rep Power: 14	I will give you an example of what I am talking about: If you look on E-Bay you can find "carbon fiber" hoods for the 370Z for around $350. I can tell you without even looking at all of them that the hoods are garbage. They weigh more than your stock aluminum hood and are not as strong. They just have a couple layers of carbon fiber matting to achieve the "look" and so that they can legally call it carbon fiber, but the rest is all resin and FRP. What I don't understand is why someone would buy a hood like this. If it's for looks, just wrap the hood you have now in CF vinyl. (Still gay, but whatever) If you think you are getting a better quality piece because it's "carbon fiber", you are unfortunately very mistaken. The fit and finish of the piece is going to be horrible, the strength is much less than stock and it will be heavier than stock. There is nothing "better" about it versus your stock aluminum hood. A quality carbon fiber hood would cost around $4K-$5K and will still look and fit like garbage because it will most likely be built for racing. Race car body panels don't "bolt on" and fit like panels built for street cars do, they just don't. They also don't look pretty because they are built for racing and nobody cares. They are likely going to get painted or wrapped and soon after crashed anyway. My take is, unless you are going racing and spending big dollars on "real" carbon fiber to reduce weight, CF parts are just for show and pretty lame (IMHO). __________________ 2012 PW NISMO #0559 - GT Spec Brace Kit - Swift Springs - ARK TP & Invidia CBE K&N Intake - UpRev Tune - 15mm Z1 Spacers & Studs - StopTech Slotted Rotors & SS Lines - ZSpeed CMAK with Stage 2 Clutch and Lightweight Flywheel

12-18-2012, 03:36 PM	#43 (permalink)
MC Moderator Join Date: Oct 2008 Location: NC Posts: 3,238 Drives: 2015 GTR NISMO Rep Power: 23	im still a carbon fiber fanboy but my tastes have gone to liking it more for accents now instead of full bodypanels so in a wayt that might have been a fad. i think if your car is stock looking wheels and all then you have a carbon hood or fenders it looks weird. ive spent a good bit of money for some small rare pre preg dry carbon pieces for my car but i think in some cases it can be overdone or more commonly misused I hate seeing different weaves matched up against one another on cars (especially the interior) like 1X1 next to 2X2 and i think even mixing and matching gloss and matte sort of ruin the look and lastly im not judging anyone if you do it but i cant understand the new trend of wrapping everything with the 3M carbon print Vinyl. i see it everywhere now and even on high end cars. i just dont get it. It "looks" ok as i used some of it to wrap my gran turismo steering wheel for my racing cockpit but i wouldnt let that stuff go within 10 feet of my car. I get people like the look but if you do it you cant say a damn thing about neons or intercoolers not attached to anything or any of that. UNKNOWN_370, kenchan and TheGreatOne like this. __________________ 2015 GT-R N1SMO "THE ONE" Instagram MCGTRN1SMO Youtube MCGTRNISMO Last edited by MC; 12-18-2012 at 03:39 PM.

12-18-2012, 03:51 PM	#45 (permalink)
MC Moderator Join Date: Oct 2008 Location: NC Posts: 3,238 Drives: 2015 GTR NISMO Rep Power: 23	i havent followed it as much over here but you guys wouldnt believe the hoods roofs and wings ive seen wrapped in it over in the GTR community. i think its just me being a hater as its always followed by 10 comments of looks nice or awesome job. but back to the CF fad thing..i guess in some ways at least aftermarket wise replacement parts sort of are a fad as if the definition is something thats not as popular now as it used to be. I remember a few years back everyone had a carbon hood or something of that nature. most manufacturers have gone to using it as accents all the way up to what was mentioned before as the high end cars use it in the chassis. for example i think the M3 with the carbon roof is cool and things of that nature. I tend to like it more when it comes from the factory like that instead of aftermarket add ons. factory carbon is eye candy but piling on aftermarket maybe can be a bit much these days __________________ 2015 GT-R N1SMO "THE ONE" Instagram MCGTRN1SMO Youtube MCGTRNISMO

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] carbon fiber fangs and carbon fiber diffuser	ZoroItaliano	Parts for sale (Private Classifieds)	0	12-12-2011 05:04 PM
Carbon fiber steering wheel by Carbon Fiber Element - and other bits	SeeyaBud86	Exterior & Interior	9	03-22-2011 04:23 AM
FS: Seibon Carbon Fiber Front Lip and EVO-R carbon fiber Side Skirts	tabrams31	North West Region	7	03-09-2011 04:56 PM
FS: Seibon Carbon Fiber Front Lip and EVO-R carbon fiber Side Skirts	tabrams31	Parts for sale (Private Classifieds)	20	03-09-2011 04:54 PM
looking for 370z for carbon fiber project and free carbon fiber products	370z_hot	Exterior & Interior	23	05-16-2009 09:32 PM

12-18-2012, 03:40 PM	#44 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	yah, while do use dinoc on my interior i dont use it in large areas... it's just a pattern accent i added vs the plain matte black trims my Z came in. i prefer matte on the interior pieces as i hate reflection. even real CF pieces, i dont like it in large areas. just simple accents here and there is enough for me. (mines's rear wing tip and ings+ front lip and fangs).