Swear i just gained 20 hp

brucelidat · 11-29-2011, 11:57 PM

Member crwallace1 says he made one that can be accessed without bumper removal. His is attached via magnets with an operating temp of up to 176 degrees farenheit. Any thoughts on how well this method would work? Are the magnet temps an issue? If it woks fine, his solution would be great for ease of access.

Oil Cooler Blocker

brucelidat · 11-30-2011, 11:49 PM

Quote:

Originally Posted by brucelidat

Member crwallace1 says he made one that can be accessed without bumper removal. His is attached via magnets with an operating temp of up to 176 degrees farenheit. Any thoughts on how well this method would work? Are the magnet temps an issue? If it woks fine, his solution would be great for ease of access.

Oil Cooler Blocker

bump

Anyone have any thoughts on this solution?

roy'sz · 12-01-2011, 03:00 AM

Quote:

Originally Posted by brucelidat

bump

Anyone have any thoughts on this solution?

DUDE....think about it. You got a $30,000 sports car and you are gonna roll around town with your plate stuck to your cooler? no no no no no!

1. Go to Lowes
2. Get industrial velcro
3. Get gloss black spray pain
4. Get a 1'x1' sheet of 1/16 aluminum
5. If you don't have tin snips then buy a pair, and a tape measurer too.

Its really easy, Im a bit slow but if I can do it, I have faith that others can too.

brucelidat · 12-01-2011, 12:53 PM

Quote:

Originally Posted by roy'sz

DUDE....think about it. You got a $30,000 sports car and you are gonna roll around town with your plate stuck to your cooler? no no no no no!

1. Go to Lowes
2. Get industrial velcro
3. Get gloss black spray pain
4. Get a 1'x1' sheet of 1/16 aluminum
5. If you don't have tin snips then buy a pair, and a tape measurer too.

Its really easy, Im a bit slow but if I can do it, I have faith that others can too.

I was referring to crwallace's magnetic blocker solution. My license plate idea was just saying what if I placed my plate to the the side like a lot of people already do IN FRONT, not inside, and whether or not that would help at all.

kenchan · 12-01-2011, 02:38 PM

Quote:

Originally Posted by roy'sz

DUDE....think about it. You got a $30,000 sports car and you are gonna roll around town with your plate stuck to your cooler? no no no no no!

1. Go to Lowes

woaah, failed right there.

11-29-2011, 11:57 PM	#1 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 33	Member crwallace1 says he made one that can be accessed without bumper removal. His is attached via magnets with an operating temp of up to 176 degrees farenheit. Any thoughts on how well this method would work? Are the magnet temps an issue? If it woks fine, his solution would be great for ease of access. Oil Cooler Blocker __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cost per HP gained? 0-60 reduction per HP?	cab83_750	Nissan 370Z General Discussions	36	09-10-2010 06:14 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 12:53 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Engine & Drivetrain	6	09-06-2009 05:20 PM
My Z is coming i swear	Plasmaball	Nissan 370Z General Discussions	9	08-06-2009 07:22 PM