What did you do with your Z today

Alchemy · 06-16-2011, 11:51 AM

Quote:

Originally Posted by Econ

staring at Fedex for updated on my Test Pipes.

Schedule delivery says this saturday...does Fedex Ground even deliver on saturdays?

What brand did you go with?? You doin install yourself??

chops · 06-16-2011, 12:05 PM

Quote:

Originally Posted by onzedge

You should come out for it. Don't just live vicariously through the pictures I am going to post.

if i lived closer to sac id totally go. looks fun, but thats a faaaaar drive from the south bay area!

Econ · 06-16-2011, 12:54 PM

Quote:

Originally Posted by Alchemy

What brand did you go with?? You doin install yourself??

i bought Berk Non Resonated.

I'm going to see if i can get the "Demon Bolts" off myself...if not im gonna have to take it to the shop.

it really is such a straight forward install if you can get the bolts off

Alchemy · 06-16-2011, 01:12 PM

Quote:

Originally Posted by Econ

i bought Berk Non Resonated.

I'm going to see if i can get the "Demon Bolts" off myself...if not im gonna have to take it to the shop.

it really is such a straight forward install if you can get the bolts off

I did them myself, well with a friend actually. The hardest part was actually getting to the bolts. Once we snaked a frankentool of extentions and u-joints down to the bolts they broke free fairly easy. Basically my buddy laid under the car, we fished the extension thru the engine bay and he held it on from underneath as I broke it free from up top. I did the 'ol steel wool in the o2 bungs to prevent a check engine light but still got one as soon as I started it

98intrigue · 06-16-2011, 01:32 PM

Quote:

Originally Posted by Econ

i bought Berk Non Resonated.

I'm going to see if i can get the "Demon Bolts" off myself...if not im gonna have to take it to the shop.

it really is such a straight forward install if you can get the bolts off

Yeah, it's pretty easy. I installed my cats last year. I PB blaster onthe bolts. The car sat for 2 hours and then they came off pretty easily. No demon bolt here! I used a breaker bar, 24" of extensions, and a u-joint. Then I had a friend hold a wrench under the car.

Synack · 06-16-2011, 02:07 PM

Quote:

Originally Posted by 98intrigue

Yeah, it's pretty easy. I installed my cats last year. I PB blaster onthe bolts. The car sat for 2 hours and then they came off pretty easily. No demon bolt here! I used a breaker bar, 24" of extensions, and a u-joint. Then I had a friend hold a wrench under the car.

That's still a pretty demonic strategy to use on ONE bolt. Lol.

98intrigue · 06-16-2011, 02:28 PM

^it was used on all the bolts. It took me less than 2 hours to fake off the stock cats and install the Berks.

chops · 06-16-2011, 02:46 PM

Quote:

Originally Posted by Alchemy

I did them myself, well with a friend actually. The hardest part was actually getting to the bolts. Once we snaked a frankentool of extentions and u-joints down to the bolts they broke free fairly easy. Basically my buddy laid under the car, we fished the extension thru the engine bay and he held it on from underneath as I broke it free from up top. I did the 'ol steel wool in the o2 bungs to prevent a check engine light but still got one as soon as I started it

roll up the steel wool into a tighly rolled ball slightly larger than the size of the O2 bung. guarenteed no CEL!

Econ · 06-16-2011, 02:49 PM

Quote:

Originally Posted by 98intrigue

^it was used on all the bolts. It took me less than 2 hours to fake off the stock cats and install the Berks.

did you remove the strut bar?

98intrigue · 06-16-2011, 02:51 PM

Quote:

Originally Posted by Econ

did you remove the strut bar?

Yeah, but that takes all of 2 minutes to take off.

Econ · 06-16-2011, 03:14 PM

Quote:

Originally Posted by 98intrigue

Yeah, but that takes all of 2 minutes to take off.

yea, its nothing.

is reaching the bolts from the engine bay the only way? no way to do it from under the car?

Alchemy · 06-16-2011, 03:14 PM

Quote:

Originally Posted by Econ

did you remove the strut bar?

I did not have to remove it.

Alchemy · 06-16-2011, 03:15 PM

Quote:

Originally Posted by chops

roll up the steel wool into a tighly rolled ball slightly larger than the size of the O2 bung. guarenteed no CEL!

Yeah I didnt pack it super tight. I figured that was probably the problem.

Dzel · 06-16-2011, 05:21 PM

Ordered my CNT resonated test pipes!!! Also got some quotes for blacking out my front and rear valances. Woot Woot

Should be here in a couple of weeks

Dzel · 06-16-2011, 05:24 PM

Quote:

Originally Posted by chops

roll up the steel wool into a tighly rolled ball slightly larger than the size of the O2 bung. guarenteed no CEL!

Pics?

Congrats Econ

06-16-2011, 02:28 PM	#2917 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 38 Posts: 4,855 Drives: 2014 Viper Rep Power: 429	^it was used on all the bolts. It took me less than 2 hours to fake off the stock cats and install the Berks. __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

06-16-2011, 05:21 PM	#2924 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Ordered my CNT resonated test pipes!!! Also got some quotes for blacking out my front and rear valances. Woot Woot Should be here in a couple of weeks __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Got Z? I did today!	dharvison	New 370Z Owner	17	12-14-2011 04:45 PM
Saw a GTR today	bigaudiofanat	The Lounge (Off Topic)	30	07-15-2011 05:14 PM
Today was the day!	NewYorkJon34	New 370Z Owner	4	06-23-2009 03:03 PM
Just got it Today 6/14/09 :D!!!!	COD4	New 370Z Owner	15	06-21-2009 04:22 PM
New as of today	prodigyz	New 370Z Owner	1	04-14-2009 12:42 AM