QuickJack

BettyZ

interesting. I use the supplied smaller block under the pinch weld block.. and a sheet or two of 1/4 plywood under all that to ensure the blocks are flush with the lifting points before I raise her up.

Pro-tip - wrap the pinch weld blocks with hi-viz tape, and have a tape pennant running off each one. That way you don't drive off with the blocks still on the pinch welds.

__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods

Mrzoops

Great thought! You would never see them once the car was back on the ground and likely would lose it. Good tip.

BettyZ

Thanks! Came up with it after I took the Z to the grocery and saw the blocks still on the rails walking across the parking lot lol

__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods