What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

Fuzzzy · 02-24-2019, 12:17 PM

Quote:

Originally Posted by Rusty

Think we did a pretty good job moderating on this subject.

He got a mild beat down.

Yep. His quest for "attaboys" was effectively thwarted.

bunk · 02-24-2019, 04:35 PM

Spit-shined the Z, and a quick photo shoot before going into work for a bit.

bunk · 02-24-2019, 04:38 PM

Couple more poses.. shes growing up nicely!

Dreadnaught · 02-25-2019, 03:47 PM

This past weekend I performed an under vehicle and under hood inspection. Check and corrected all fluids and set my tire pressure. I also changed my oil and drained and filled my coolant.

Next I installed new PCV valves and installed new spark plugs. For anybody doing spark plugs for the first time, blow out the spark plug wells with compressed air before removing the spark plugs once you take the coils off. This will get any foreign material out of the spark plug well so it does not fall into the cylinders as you remove the spark plugs. Lastly, I installed new throttle body gaskets.

Spark plug torque - 14 Ft lbs.
Coil bolt torque - 62 in lbs.
Throttle body bolt torque - 102 in lbs.
PCV valve torque - 22 in lbs.

Happy wrenching everyone.

abm89 · 02-25-2019, 05:51 PM

Sold my original Silver RPF1s on Sunday. Put in an order for some new CF10s

ZontheRocks · 02-25-2019, 08:40 PM

Found the differential bushing has busted, so ordered the Z1 urethane kit. Also added the subframe collars to round things out while I’m down there.

abm89 · 02-25-2019, 08:52 PM

Quote:

Originally Posted by ZontheRocks

Found the differential bushing has busted, so ordered the Z1 urethane kit. Also added the subframe collars to round things out while I’m down there.

I really like my subframe collars. I only have the rear set installed since doing the front part myself would require removing shaved off bolts (I need to schedule a time to go in and get those done.)

Those plus my solid diff bushings resulted in me car wanting to put the power down with urgency.

Rusty · 02-25-2019, 09:19 PM

Quote:

Originally Posted by ZontheRocks

Found the differential bushing has busted, so ordered the Z1 urethane kit. Also added the subframe collars to round things out while I’m down there.

How are you going to remove the oem diff bushing?

ZontheRocks · 02-25-2019, 11:27 PM

Quote:

Originally Posted by Rusty

How are you going to remove the oem diff bushing?

The Old Man and I have done his 350Z with Z1’s removal tool, so I will be utilizing that again.

Rusty · 02-25-2019, 11:44 PM

Quote:

Originally Posted by ZontheRocks

The Old Man and I have done his 350Z with Z1’s removal tool, so I will be utilizing that again.

That's the hard way. And it's a POS.

I tried to use it and gave up.

I've done 3 diff bushings so far. Takes me 20 minutes to remove the diff bushing. I use a deep 2" hole saw to cut the center section out. Don't use a cordless drill. They don't have enough power and get hot too quickly. Use a good 1/2 electric drill. Then a sawzall to cut 2 to 3 cuts in the outer shell. Then use a muffler tool to remove the outer shell. Starting at the saw cuts.

ZontheRocks · 02-26-2019, 04:21 AM

I’m sure we have all except the muffler tool, which is only a store ride away.

Thanks for the advice!

Rusty · 02-26-2019, 07:56 AM

Quote:

Originally Posted by ZontheRocks

I’m sure we have all except the muffler tool, which is only a store ride away.

Thanks for the advice!

If you do it my way. The only place I found a DEEP 2" hole saw is at Home Depot.

https://www.homedepot.com/p/Diablo-2...00CT/301697691

And I used an inside muffler chisel.

KingZTX · 02-27-2019, 09:48 AM

Just this last weekend, I raced in an autocross event for the first time with my university's driving club (Baylor Driving Club). This one was hosted by Texas A&M and was in College Station, Texas.

I was one of two 370Zs. Mine was competing bone stock, and the other...definitely was not. A yellow 40th anniversary whose home was the inside of a trailer. License plate was "THE Z"

A hell of an event, a lot of fun, and a fantastic platform for me to further my understanding of my car. I took a couple of photos of Prince after the event (I was too over my head to be taking any during) still all taped up--pictured with Prince is a very, very, content, helmet-haired me.

abm89 · 02-27-2019, 09:55 AM

Quote:

Originally Posted by KingZTX

Just this last weekend, I raced in an autocross event for the first time with my university's driving club (Baylor Driving Club). This one was hosted by Texas A&M and was in College Station, Texas.

I was one of two 370Zs. Mine was competing bone stock, and the other...definitely was not. A yellow 40th anniversary whose home was the inside of a trailer. License plate was "THE Z"

A hell of an event, a lot of fun, and a fantastic platform for me to further my understanding of my car. I took a couple of photos of Prince after the event (I was too over my head to be taking any during) still all taped up--pictured with Prince is a very, very, content, helmet-haired me.

How are you going to speak of a yellow 40th and not post a picture of it?

KingZTX · 02-27-2019, 10:00 AM

Quote:

Originally Posted by abm89

How are you going to speak of a yellow 40th and not post a picture of it?

I didn't get one this time around...next month!

02-25-2019, 03:47 PM	#2689 (permalink)
Dreadnaught Track Member Join Date: Dec 2009 Location: Farmington, Utah Posts: 582 Drives: 14 SR 370z 6MT Rep Power: 10139	This past weekend I performed an under vehicle and under hood inspection. Check and corrected all fluids and set my tire pressure. I also changed my oil and drained and filled my coolant. Next I installed new PCV valves and installed new spark plugs. For anybody doing spark plugs for the first time, blow out the spark plug wells with compressed air before removing the spark plugs once you take the coils off. This will get any foreign material out of the spark plug well so it does not fall into the cylinders as you remove the spark plugs. Lastly, I installed new throttle body gaskets. Spark plug torque - 14 Ft lbs. Coil bolt torque - 62 in lbs. Throttle body bolt torque - 102 in lbs. PCV valve torque - 22 in lbs. Happy wrenching everyone. Rusty, abm89, Ghostvette and 2 others like this. __________________ Ford Diesel and Heavy Line Technician at your service. Last edited by Dreadnaught; 02-25-2019 at 07:04 PM.

02-25-2019, 05:51 PM	#2690 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,307 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	Sold my original Silver RPF1s on Sunday. Put in an order for some new CF10s God-Speed and JARblue like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

02-25-2019, 08:40 PM	#2691 (permalink)
ZontheRocks Track Member Join Date: Mar 2017 Location: Central Florida Posts: 936 Drives: 2016 Nissan PW 370Z Rep Power: 33079	Found the differential bushing has busted, so ordered the Z1 urethane kit. Also added the subframe collars to round things out while I’m down there. abm89 and Spooler like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM

02-26-2019, 04:21 AM	#2696 (permalink)
ZontheRocks Track Member Join Date: Mar 2017 Location: Central Florida Posts: 936 Drives: 2016 Nissan PW 370Z Rep Power: 33079	I’m sure we have all except the muffler tool, which is only a store ride away. Thanks for the advice!