What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

radix023 · 01-13-2018, 04:31 PM

Quote:

Originally Posted by Spooler

Dodged a bullet today. I just about got rear ended again. This time I saw it coming and chose the median that was a big mud pit. Traction control kick in and I sunk. Oh well. Car is fine just some grass sods to clean off underneath. My neck is good and my car is good. I just got a tow bill for someone to winch me out. I'll pay that any day of the week and twice on Sunday.

Good to hear that you are OK.

Here's one to heads-up driving!

Did the perpetrator bear any consequences?

Spooler · 01-14-2018, 01:12 AM

Quote:

Originally Posted by radix023

Good to hear that you are OK.

Here's one to heads-up driving!

Did the perpetrator bear any consequences?

Noop, drove off and left me stuck in the median. I had folks stopping to take pictures and cuss at me. LOL So many losers these days it is unreal.

Kzonts · 01-14-2018, 03:42 AM

Quote:

Originally Posted by Spooler

Noop, drove off and left me stuck in the median. I had folks stopping to take pictures and cuss at me. LOL So many losers these days it is unreal.

Hopefully the perp will get their dose of carma someday. My wife and I had two close calls lately. One asshat drove around her on the left when she was making a left turn. She saw them coming in her mirror and they weren’t paying attention and couldn’t slow down. And some lady pulled out of a side street and I had to swerve to miss her. Maybe we do need self driving cars...

redondoaveb · 01-18-2018, 07:26 PM

When I had my car at Specialty Z for my sc tune, I had them install all the sensors, relays and wiring for my two gauges. Here's a crappy picture of the finished cubby panel I fabricated.

RumbleFish · 01-18-2018, 07:40 PM

Quote:

Originally Posted by redondoaveb

When I had my car at Specialty Z for my sc tune, I had them install all the sensors, relays and wiring for my two gauges. Here's a crappy picture of the finished cubby panel I fabricated.

How about some numbers from the tuning session?

redondoaveb · 01-18-2018, 08:00 PM

A2a kit, 9lb pulley. 472 on 91 octane, 541 on e85.
https://www.instagram.com/p/Bd1lLfBFOQJ/

TheTripleC · 01-19-2018, 12:04 PM

Quote:

Originally Posted by redondoaveb

A2a kit, 9lb pulley. 472 on 91 octane, 541 on e85.
https://www.instagram.com/p/Bd1lLfBFOQJ/

Which trim head do you have and what about headers/exhaust set up? Curious cause I'm going to upgrade to the A2A kit soon..

redondoaveb · 01-19-2018, 12:53 PM

Quote:

Originally Posted by TheTripleC

Which trim head do you have and what about headers/exhaust set up? Curious cause I'm going to upgrade to the A2A kit soon..

Si supercharger, stock exhaust headers, test pipes and fast intentions cbe.

TheTripleC · 01-19-2018, 01:02 PM

Quote:

Originally Posted by redondoaveb

Si supercharger, stock exhaust headers, test pipes and fast intentions cbe.

Ok, right on. I have the SI trim head as well along with a Fast Intensions TDX Turbo cbe, but stock headers and cats on 91 oct. I have the smaller stillen pulley and plan on getting long tube headers when I get the A2A kit going so I'm curious to see how close I can get to 500hp..

JTM88 · 01-19-2018, 05:46 PM

So I was hoping to have my gears installed, but the shop said they can't get the gears to mesh. I have a suspicion that the guy I bought the diff from sold me an Auto diff and called it a manual.

Does anybody have a picture of an auto differential next to a manual?

Rusty · 01-18-2018, 08:03 PM

Quote:

Originally Posted by redondoaveb

When I had my car at Specialty Z for my sc tune, I had them install all the sensors, relays and wiring for my two gauges. Here's a crappy picture of the finished cubby panel I fabricated.

That soooooo reminds me of a robot face. Sorry.

redondoaveb · 01-18-2018, 08:19 PM

Quote:

Originally Posted by Rusty

That soooooo reminds me of a robot face. Sorry.

I'll let you get away with that because you're older than me. Actually, only a year. Dammit!

01-19-2018, 05:46 PM	#10 (permalink)
JTM88 Enthusiast Member Join Date: Oct 2016 Location: Houston, TX Posts: 276 Drives: 2012 370Z Rep Power: 14	So I was hoping to have my gears installed, but the shop said they can't get the gears to mesh. I have a suspicion that the guy I bought the diff from sold me an Auto diff and called it a manual. Does anybody have a picture of an auto differential next to a manual? __________________ 2012 Base Gun Metallic MT6 -CNT Racing CBE-Swift Sport Springs-Sport Akebono BBK-Z1 Motorsports Intakes-König Oversteer Wheels-1320 Resonated Test Pipes -RJM Rev 2.1 Clutch Pedal-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM

01-18-2018, 08:00 PM	#6 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,379 Drives: 2014 Nismo Gunmetal Rep Power: 2684375	A2a kit, 9lb pulley. 472 on 91 octane, 541 on e85. https://www.instagram.com/p/Bd1lLfBFOQJ/