What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

Rusty · 11-18-2017, 10:36 PM

Swapped out the 100 psi oil pressure gauge for the 150 psi gauge from SpeedHut.

Put the interior back together and cleaned it.

1st pic. 150 and 100 psi gauges.
2nd pic. Without gauge lights off.
3rd pic. With gauge lights on.

In pic's 2 and 3. You can see the LOW Warning light on for the oil pressure. It's set at 25 psi.

I still have to label my switches.

MadSciSnails · 11-18-2017, 11:08 PM

Drove it to work to do some boring non-z related stuff again..

Sent from my iPhone using Tapatalk

Jayhovah · 11-19-2017, 10:14 AM

Quote:

Originally Posted by Jayhovah

Will need to add some extensions to the back of the headunit and ALP brain before I can reinstall... Also want to add a mute button and alert LED to one of my switch blanks for my new Uniden R3 radar detector while I am at it. Hopefully can spare a couple of hours here and there to get it finished up.

Finished up this install...

And added more pics here:
Added USB / AUX to armrest cubby

Spooler · 11-19-2017, 08:50 PM

Did my oil change today. 6 quarts with a 34 row oil cooler and CJM baffled oil pan.

jchammond · 11-20-2017, 01:42 AM

Thought about washing ~Z~ before work,,,? But from a performance side, it loves these air temps.

Sent from my iPhone using Tapatalk

sp911 · 11-20-2017, 11:06 AM

drove to work at 5 am and decided to take the highway even tho forecasters said chance of black ice. passes 3 car accident in an area where you can see a snow squall passed by overnight. had to be 5 fire trucks and an ambulance. it's that time of year I guess.

redondoaveb · 11-20-2017, 10:41 PM

I re-did my gauge panel and just got it back from being wrapped. It's just sitting in the cubby opening right now. I'll have the gauges in it and have it bolted down tomorrow. I went ahead and had them add the vertical stitching just like what's on the cubby door.

Rusty · 11-21-2017, 04:54 AM

What is your flat panel made of?

redondoaveb · 11-21-2017, 11:30 AM

I used 1/4" craft plywood. You could use 1/8" as it's a little easier to work with. Here's my finished product.

Rusty · 11-21-2017, 11:34 AM

Looks good. As you know. I been looking for a cubby for a project. Have a couple offer, but their all have the white stitching. I'm looking for the red Nismo stitching.

Jayhovah · 11-21-2017, 11:35 AM

Quote:

Originally Posted by redondoaveb

I used 1/4" craft plywood. You could use 1/8" as it's a little easier to work with. Here's my finished product.

looks like some kind of a disney robot character!

Spoiler · 11-21-2017, 12:29 PM

Quote:

Originally Posted by redondoaveb

I used 1/4" craft plywood. You could use 1/8" as it's a little easier to work with. Here's my finished product.

Nice job. Looks great...

redondoaveb · 11-21-2017, 12:42 PM

Quote:

Originally Posted by Jayhovah

looks like some kind of a disney robot character!

Okay.

redondoaveb · 11-21-2017, 12:43 PM

Quote:

Originally Posted by Spoiler

Nice job. Looks great...

Thanks

Jayhovah · 11-21-2017, 12:48 PM

Quote:

Originally Posted by redondoaveb

Okay.

guess I am alone on this one.

11-18-2017, 11:08 PM	#767 (permalink)
MadSciSnails Base Member Join Date: Aug 2016 Location: Columbia MS Posts: 121 Drives: '14 370z, 94 300zxTT Rep Power: 8	Drove it to work to do some boring non-z related stuff again.. Sent from my iPhone using Tapatalk Rusty and Hotrodz like this.

11-20-2017, 01:42 AM	#770 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	Thought about washing ~Z~ before work,,,? But from a performance side, it loves these air temps. Sent from my iPhone using Tapatalk Jayhovah likes this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

11-21-2017, 04:54 AM	#773 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,861 Drives: 2011 Nismo GM 6M Rep Power: 2684436	What is your flat panel made of? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

11-21-2017, 11:34 AM	#775 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,861 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Looks good. As you know. I been looking for a cubby for a project. Have a couple offer, but their all have the white stitching. I'm looking for the red Nismo stitching. redondoaveb likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM

11-19-2017, 08:50 PM	#769 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	Did my oil change today. 6 quarts with a 34 row oil cooler and CJM baffled oil pan.

11-20-2017, 11:06 AM	#771 (permalink)
sp911 Enthusiast Member Join Date: Feb 2014 Location: central connecticut Posts: 259 Drives: 2012 370z gun metal Rep Power: 11	drove to work at 5 am and decided to take the highway even tho forecasters said chance of black ice. passes 3 car accident in an area where you can see a snow squall passed by overnight. had to be 5 fire trucks and an ambulance. it's that time of year I guess.