Nissan 370Z Forum
Page 95 of 163 « First 45859394 95 9697105145 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Nissan 370Z General Discussions (http://www.the370z.com/nissan-370z-general-discussions/)
-   -   What did you do with your Z today V (ON TOPIC DISCUSSION ONLY) (http://www.the370z.com/nissan-370z-general-discussions/122002-what-did-you-do-your-z-today-v-topic-discussion-only.html)

ZontheRocks 07-12-2019 02:47 PM
Quote:
Originally Posted by JARblue (Post 3866771)
Good to hear. Recently they seem to be getting more complaints than compliments regarding their customer service, so I'm glad they are taking care of you. As they should.
Their egos seem to have grown with the facebook groups throwing their names out like they are the only company that sells products for the Z. Barely a mention for ZSpeed, CJM, RJM, ConceptZ, SOHO, etc.

FB groups are all "Z1 is the greatest ever! Dat Tomei dah! I just dropped my instagram handle. Follow me and I'll follow youuu!!!"

:twocents:

abm89 07-12-2019 02:56 PM
I'll take blame for the Tomei crap. As soon as people heard the Z33 version I had on my car, everyone wanted it.

Sway 07-12-2019 04:29 PM
Quote:
Originally Posted by abm89 (Post 3866839)
I'll take blame for the Tomei crap. As soon as people heard the Z33 version I had on my car, everyone wanted it.
I actually just bought a Tomei from them. But it’s because my exhaust weighs over 9000 lbs and my tuner said I could pick up more tq and hp with a single exit

bunk 07-12-2019 04:52 PM
Quote:
Originally Posted by BettyZ (Post 3866810)
Naw, they were just trolling the forum and saw his avatar. Sway, was one of their messages "We'd like to get you.. err, your Z on the dyno..."?

Sent from my SM-G955U using Tapatalk
Kudos to them
.. but it really shouldn't take a customer(s) complaints to provide good service. Preventing fires always beats putting them out

BettyZ 07-12-2019 05:50 PM
Idk.. you know what they say: a pound of pure is a helluva lot more fun than an ounce of prevention...

DeliriousClam 07-12-2019 07:14 PM
1 Attachment(s)
Got it back today. Need to put the splitter on

Hotrodz 07-12-2019 07:20 PM
Quote:
Originally Posted by DeliriousClam (Post 3866885)
Got it back today. Need to put the splitter on
:iagree:

Baronsmokes 07-13-2019 06:55 AM
5 Attachment(s)
Have car apart making some changes today.Had wheel alinement 6 weeks ago.
Tires wearing uneven.

Car on hoist looking at **** job they did.

Baronsmokes 07-13-2019 07:14 AM
No exhaust.
Can not hear how loud this is in video.Was making walls shake.http://www.youtube.com/watch?v=https://youtu.be/CFGS3xeOFQg

bunk 07-13-2019 07:26 AM
When I did my oil change last weekend, discovered that my splashguard was being held on by only 3 fasteners and the 3 plastic push clips.. Ordered a set of fasteners, delivered next day. Guess what Im gonna do with my Z today?

Zingston 07-13-2019 07:35 AM
Quote:
Originally Posted by bunk (Post 3866957)
When I did my oil change last weekend, discovered that my splashguard was being held on by only 3 fasteners and the 3 plastic push clips.. Ordered a set of fasteners, delivered next day. Guess what Im gonna do with my Z today?


:confused: Come on, tell us!!!!

bunk 07-13-2019 07:43 AM
Quote:
Originally Posted by Baronsmokes (Post 3866955)
No exhaust.
Can not hear how loud this is in video.Was making walls shake.
http://www.youtube.com/watch?v=CFGS3xeOFQg

sounds like a v8
Baron, when you post youtube links, just paste the stuff after the https://youtube.com.

ie: (YOUTUBE]CFGS3xeOFQg[/YOUTUBE) ... I replaced the open/closed brackets with parenthesis so that the html doesnt kick in....

bunk 07-13-2019 07:45 AM
Quote:
Originally Posted by Zingston (Post 3866960)
:confused: Come on, tell us!!!!
Well, seeing that I was missing a ton of fasteners for my splashguard, ordered a set of replacement fasteners, isnt it obvious im going to clean the engine bay????

Zingston 07-13-2019 08:01 AM
Quote:
Originally Posted by bunk (Post 3866963)
Well, seeing that I was missing a ton of fasteners for my splashguard, ordered a set of replacement fasteners, isnt it obvious im going to clean the engine bay????


Oh yeah! Doh!!!!!! I knew that!!!!!! :icon14:

bunk 07-13-2019 08:06 AM
Quote:
Originally Posted by Zingston (Post 3866968)
Oh yeah! Doh!!!!!! I knew that!!!!!! :icon14:
Ill probably not though because Im lazy. Might drive it around for a bit and b1tch about a dirty engine bay when my splashguard falls off. :shakes head:

BettyZ 07-13-2019 08:41 AM
Quote:
Originally Posted by bunk (Post 3866969)
Ill probably not though because Im lazy. Might drive it around for a bit and b1tch about a dirty engine bay when my splashguard falls off. :shakes head:
That sounds much more like you.

Buy a ZSpeed aluminum undershroud. It will give you the happy feels.

bunk 07-13-2019 09:06 AM
Quote:
Originally Posted by BettyZ (Post 3866971)
That sounds much more like you.

Buy a ZSpeed aluminum undershroud. It will give you the happy feels.
Yep. But I really need to watch what I spend right now. Major changes in my bread and butter client might end soon. :mad:

Hotrodz 07-13-2019 12:16 PM
Quote:
Originally Posted by bunk (Post 3866972)
Yep. But I really need to watch what I spend right now. Major changes in my bread and butter client might end soon. :mad:
Sorry dude I hope everything work out the way you want it too!

Rusty 07-13-2019 12:22 PM
Quote:
Originally Posted by Hotrodz (Post 3866996)
Sorry dude I hope everything work out the way you want it too!
:iagree:

mishuko 07-13-2019 03:20 PM
So after literally 4 days... i had a just shy of 20l/100km mileage. Mind you i had to drive about an hour downtown toronto in stop and go along queen st.

It burbles. It pops. When people see the carbon mufflers their eyes light up. Its starting to break in and sound so much nicer.

-ZS-Carpenter 07-13-2019 03:44 PM
Fresh oil and a little clutch pedal adjustment. Had to bring the top switch down a bit and might have to bring the engagement up. Clutch is broke in now and I'm not hitting 2nd as fast as i want. 3rd is perfect but going to need a bit of tuning to get it just right.

Off for a test :driving:

abm89 07-13-2019 04:34 PM
Finding random places and things to do to break in the clutch. Making mental notes to slip the clutch every shift and don't rev-match.

Such a hard thing to do. I found that reversing is a pain in the ***, so I'll try to avoid that as much as possible.

Sway 07-13-2019 09:08 PM
1 Attachment(s)
Got my Tomei in... with my Thai Titanium y pipe I’ll be saving over 60 lbs :tup:

-ZS-Carpenter 07-14-2019 06:26 AM
Quote:
Originally Posted by Sway (Post 3867070)
Got my Tomei in... with my Thai Titanium y pipe I’ll be saving over 60 lbs :tup:
Seen any dyno runs with those Y pipes yet? Curious how they flow

Sent from my SM-G965U using Tapatalk

Sway 07-14-2019 09:50 AM
Quote:
Originally Posted by -ZS-Carpenter (Post 3867110)
Seen any dyno runs with those Y pipes yet? Curious how they flow

Sent from my SM-G965U using Tapatalk
I haven’t, but I will provide a dyno with my gthaus set up vs my Tomei/Thai Titanium set up. I will tell you they are LIGHT, and the welds are good quality too.

gizzyman47 07-14-2019 10:58 AM
Installed the Sprint Booster V3 I got yesterday. Super easy and really makes a difference in the throttle response. I like it!

-ZS-Carpenter 07-14-2019 11:41 AM
Quote:
Originally Posted by Sway (Post 3867132)
I haven’t, but I will provide a dyno with my gthaus set up vs my Tomei/Thai Titanium set up. I will tell you they are LIGHT, and the welds are good quality too.
Cool. I've been following En since he started the prototypes. His welding is gorgeous

Sent from my SM-G965U using Tapatalk

q45racing 07-15-2019 01:09 PM
celebrated my birthday at Import evolution 2019 ORLANDOhttps://uploads.tapatalk-cdn.com/201...355dd6a642.jpghttps://uploads.tapatalk-cdn.com/201...b35ddac0f6.jpghttps://uploads.tapatalk-cdn.com/201...3ac1be83a3.jpghttps://uploads.tapatalk-cdn.com/201...cde4d0d15c.jpghttps://uploads.tapatalk-cdn.com/201...fdf4f0fa82.jpghttps://uploads.tapatalk-cdn.com/201...20de7ec649.jpg

Sent from my SM-N950U using Tapatalk

ZontheRocks 07-15-2019 01:29 PM
Currently loving the ART pipe + Shockwave combo. Even more so that the seller (SupraKirk) included O2 extensions which = No CEL!


Now to save up for the EcuTek tune.


And still have to replace the damn busted diff bushing.

DeliriousClam 07-15-2019 03:16 PM
Just finished putting the splitter on. The front now sits level with the side blades

Zezus 07-15-2019 03:33 PM
Quote:
Originally Posted by DeliriousClam (Post 3867311)
Just finished putting the splitter on. The front now sits level with the side blades
What splitter did you go with?
I need one to compliment my skirts as well.

DeliriousClam 07-15-2019 03:51 PM
1 Attachment(s)
Quote:
Originally Posted by Zezus (Post 3867312)
What splitter did you go with?
I need one to compliment my skirts as well.
Honestly I could only find one for the Amuse bumper and it was on eBay.

redondoaveb 07-15-2019 03:54 PM
Quote:
Originally Posted by DeliriousClam (Post 3867315)
Honestly I could only find one for the Amuse bumper and it was on eBay.
It looks good!

Sway 07-16-2019 06:35 AM
Quote:
Originally Posted by Sway (Post 3866767)
Z1 contacted me back twice on the matter.

They pretty much bent over backwards for me it seems.
My next order will be here next week (just a extended lug stud tool)
And we will see exactly what they did.

But they were quick to respond, explain, and offer viable solutions to my issues.
I’m satisfied and will order from them again.
Got my package from Z1 yesterday,
Had the part I ordered, the emblem they promised me plus an extra in a different finish. A butt load of stickers and decals, Z1, Z1 Motorsports, Z Dino, in different colors etc... a Z1 koozie, and a Z1 keychain/bottle opener.

Pretty nice of them, not going to lie.
Hopefully I’ll get to install my extended lugs and Tomei this weekend. :tup:

BettyZ 07-16-2019 07:19 AM
Quote:
Originally Posted by Sway (Post 3867434)
Got my package from Z1 yesterday,

Had the part I ordered, the emblem they promised me plus an extra in a different finish. A butt load of stickers and decals, Z1, Z1 Motorsports, Z Dino, in different colors etc... a Z1 koozie, and a Z1 keychain/bottle opener.



Pretty nice of them, not going to lie.

Hopefully I’ll get to install my extended lugs and Tomei this weekend. :tup:
Wow... you must have given them one helluva tongue [lashing].

Sent from my SM-G955U using Tapatalk

BettyZ 07-16-2019 07:20 AM
At Firestone getting an alignment. Literally standing in the window watching them work and making sure they know I'm watching.

Sent from my SM-G955U using Tapatalk

old guy 07-16-2019 08:06 AM
Quote:
Originally Posted by BettyZ (Post 3867443)
At Firestone getting an alignment. Literally standing in the window watching them work and making sure they know I'm watching.

Sent from my SM-G955U using Tapatalk
:iagree: always

BettyZ 07-16-2019 08:15 AM
Alignment specs. They said they fixed the steering wheel angle in the comp but now I have to turn the wheel a bit right to stay straight. Looks like I'll be removing the steering wheel and adjusting that...https://uploads.tapatalk-cdn.com/201...1d7e870246.jpghttps://uploads.tapatalk-cdn.com/201...222744d3d7.jpg

Sent from my SM-G955U using Tapatalk

Spooler 07-16-2019 08:39 AM
Quote:
Originally Posted by BettyZ (Post 3867452)
Alignment specs. They said they fixed the steering wheel angle in the comp but now I have to turn the wheel a bit right to stay straight. Looks like I'll be removing the steering wheel and adjusting that...https://uploads.tapatalk-cdn.com/201...1d7e870246.jpghttps://uploads.tapatalk-cdn.com/201...222744d3d7.jpg

Sent from my SM-G955U using Tapatalk
That is because the rear toe is not right. Green don't mean good. LMAO. The toe in needs to be set dang near the same on left and right. Try again. Tell them to set the toe in the rear and front dead middle of spec.

abm89 07-16-2019 09:16 AM
Quote:
Originally Posted by Spooler (Post 3867456)
That is because the rear toe is not right. Green don't mean good. LMAO. The toe in needs to be set dang near the same on left and right. Try again. Tell them to set the toe in the rear and front dead middle of spec.

Agreed. WTF?


All times are GMT -5. The time now is 05:15 PM.
Page 95 of 163 « First 45859394 95 9697105145 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2